The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old February 6, 2002, 09:56 AM   #1
TacticalReload
Senior Member
 
Join Date: July 2, 2001
Posts: 119
Chrono and weapons check at IDPA?

I was recently in the market for a Glock 34 or 35. I figured that I would go with the 35 and get a aftermarket barrel to shoot 9mm... that way, I could compete and practice with a much cheaper and lighter recoiling round. But then I decided that perhaps I should ask IDPA how they felt about swapping a factory barrel for an aftermarket one in a different caliber (basically making my 35 into a 34).

Well, they gave me a firm "NO" to the switch... which I thought was kind of silly. So I figured I would just get the 34 instead (which is what I did -- love it, btw!).

In any case, a friend of mine brought up a good point -- neither of us has every attended a match where they would even notice this barrel swap. That got me thinking even more. I've never been to a match where they chronographed ammo and pulled bullets to check power factor. I've never been to a match where they have handled and safety checked my gun. In fact, I've only ever been to one match where they even dropped guns into the "box" to check size.

Now I know that for the most part, we're all honest people and reasonably try to stay within the rules. But I was curious to see if people have gone to matches where the officially actually chrono ammo. Do they do this at state and national matches? Any of your local matches?
__________________
------
Steve Fuller
scfuller@fast.net
TacticalReload is offline  
Old February 6, 2002, 10:16 AM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,173
At the 2001 IDPA Nationals we chronographed our ammo at a station set up next to one of the match stages. As best I recall, at previous Nationals and some State championships, they pulled samples and chronoed the winners' ammo.

I have seen chronographs set up at local shoots, but more as a convenience for shooters to check their ammo for upcoming major matches, than as a test for eligibility at the club.

I have not seen a Box test as such, but every once in a while you will see a stage in which the starting position is with the gun in the Box; so it accomplishes a size test during the match. This turns up often enough to keep folks honest.

I have never had my gun handled or safety checked, I have never had my brand of holster checked against the Hackathorn List. Most all State, Regional, and National matches will do a concealment and holster/ammo placement check. The Nationals do it at *every* stage.

So you could probably have gotten away with a 9mm barrel in a .40 frame if you had chosen to fake it. But then you would not have been shooting a *stock* gun in SSP, would you?
Jim Watson is offline  
Old February 6, 2002, 10:42 AM   #3
stick
Member
 
Join Date: September 6, 2001
Posts: 90
I'm just getting into IDPA matches. Let me offer some observations from USPSA and NRA matches: the local level is casual with respect issues you mentioned. Unless it's painfully obvious (optics on a production gun, major ammo that goes "puff" not "boom",...) it's not an issue. I expect to have my gear and ammo checked during major matches (regional, sectional, state or national).

I follow the rules to the best of my ability at a match. If my gun has a mod that restricts me from a division, I'll shot open. I expect the others on the line to do the same. If somebody continues to CHEAT (and win) after being warned, the clubs and shooters I have experience with would un-invite the rat to future events.
stick is offline  
Old February 6, 2002, 11:27 AM   #4
KP95DAO
Senior Member
 
Join Date: December 30, 2000
Posts: 699
I liked the way they did the ammo check at the 2001 Nationals as opposed to the way it was done in 2000. In 2000 they had YOU select the chrono ammo and fired it out of another gun. Last year you shot what you still had in the gun after finishing the Standards stages.

By the way, at the 2001 Nationals one of the BIG name shooters concealment gear did not conceal his gun as it should. It was not long enough. Of course maybe he forgot his and had to borrow someone elses and he is a big man. Anyway, was there any sense in saying anything about it; no. He could have been wearing a trenchcoat and beat 99% of the rest of us. Then again, the rules are the rules.
KP95DAO is offline  
Old February 8, 2002, 02:47 PM   #5
Ricky T
Senior Member
 
Join Date: July 19, 1999
Location: ATL, GA
Posts: 197
"By the way, at the 2001 Nationals one of the BIG name shooters concealment gear did not conceal his gun as it should. It was not long enough. Of course maybe he forgot his and had to borrow someone elses and he is a big man. Anyway, was there any sense in saying anything about it; no. He could have been wearing a trenchcoat and beat 99% of the rest of us. Then again, the rules are the rules."
Attached Images
File Type: jpg people.jpg (45.0 KB, 95 views)
__________________
"Less yacking and more cacking" SDH
Ricky T is offline  
Old February 10, 2002, 01:16 AM   #6
KP95DAO
Senior Member
 
Join Date: December 30, 2000
Posts: 699
So, I wasn't the only one who noticed.
KP95DAO is offline  
Old February 10, 2002, 10:19 AM   #7
TacticalReload
Senior Member
 
Join Date: July 2, 2001
Posts: 119
Hmmmm... a BIG name shooter named Rob.... hmmmm... I wonder who that could be. ;-)

But seriously, I agree with you on both counts. There is no reason to believe that 99% of us could beat him regardless, but rules *are* rules.
__________________
------
Steve Fuller
scfuller@fast.net
TacticalReload is offline  
Old February 10, 2002, 09:24 PM   #8
9x45
Senior Member
 
Join Date: January 14, 2000
Location: Southern California
Posts: 505
Tac, you are only hurting yourself by shooting an aftermarket 9mm in a G35. The 40S&W extractor will not consitently grab the smaller 9mm round. Actually, for IDPA, all you need is a 9mm in either ESP or SSP. What advantage do you gain by anything more than a 125,000 power floor?
9x45 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08009 seconds with 8 queries