|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 15, 2008, 09:53 AM | #1 |
Member
Join Date: June 30, 2007
Posts: 85
|
.223 and .308 Reloading
I am currently looking for a powder that will work really well for loading 168gr BTHP 308's, and still be able to load the same powder in 55gr .223's. At this time I am not really looking for a high performance round for my .223, just something that works well in my .308 and is still sufecient for my .223. Any thoughts or suggestions?
|
March 15, 2008, 10:29 AM | #2 |
Senior Member
Join Date: September 5, 2004
Location: Western Slope, Colorado
Posts: 403
|
I'd nominate Ramshot TAC, IMR 4895 then Hodgdon VARGET; in that order.
|
March 15, 2008, 11:13 AM | #3 |
Member
Join Date: June 30, 2007
Posts: 85
|
I have been hearing a lot of good stuff about Reloader 15 and Varget. Any thoughts on those?
|
March 15, 2008, 11:27 AM | #4 |
Senior Member
Join Date: May 9, 1999
Location: Blue State
Posts: 441
|
You don't hear a lot about this powder, and I'm not sure why, but WW 748 is a great powder for both calibers.
|
March 15, 2008, 11:38 AM | #5 |
Senior Member
Join Date: September 5, 2004
Location: Western Slope, Colorado
Posts: 403
|
I haven't tried RL15 and I like Varget in .308. (pet load is 41.0gr under a 180gr Sierra SBT - 2.800 OAL)
Varget in a .223, for me, prefers a compressed load but that can cause my press to deform hollowpoint bullets when I try to seat them. With non HP bullets Varget preforms quite well. Some folks complain since Varget is an extruded powder the little sticks don't meter as well as a ball type powder. Hasn't bothered me too much. |
March 15, 2008, 12:45 PM | #6 |
Senior Member
Join Date: February 27, 2008
Location: Stafford VA
Posts: 969
|
Benchmark, Varget, RL 15 Win748. These are the ones I am working with right now.
|
March 15, 2008, 02:27 PM | #7 |
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
BLC-2 and IMR-4895
|
March 15, 2008, 03:55 PM | #8 |
Member
Join Date: February 15, 2007
Location: upstate SC
Posts: 70
|
I've been using Varget for ahwile, 2-3000 rounds I've loaded and shot. Mostly started using it because it's supposed to be a good powder for my ar15. I've got half inch groups with it using hornady 55 grain spire point bullets out of my Bushmaster Varminter and my CZ 527
|
March 15, 2008, 04:18 PM | #9 |
Senior Member
Join Date: March 30, 2007
Location: VA
Posts: 144
|
Imr-4895
|
|
|