May 23, 2005, 03:40 PM | #1 |
Senior Member
Join Date: November 23, 2000
Location: Kansas City
Posts: 587
|
MagTech Brass Question
Has anyone had experience with their brass? I like their bullets in my .44 Mag but I've not tried the brass yet.
Thanks. Bob
__________________
"Onward thru the Fog" |
May 23, 2005, 07:06 PM | #2 |
Senior Member
Join Date: August 3, 1999
Location: Houston, Texas
Posts: 2,991
|
I get mixed results. It does not seem as consistent as the other manufactures, but since it is the "bulk" ammo at my public range, I can get once fired brass for basically free. Given that I shoot the stuff.
All it all it is "OK". ps: thanks again for the 8 3/8's!
__________________
10mm and 357sig, the best things to come along since the 38 super! |
May 23, 2005, 07:49 PM | #3 |
Senior Member
Join Date: May 21, 2004
Posts: 316
|
I've shot their ammo in various calibers and I have a batch of .40 brass that is now on its third loading. No problems so far.
|
May 23, 2005, 07:49 PM | #4 |
Senior Member
Join Date: June 21, 2002
Posts: 2,019
|
Bob, I got a great deal on some in 44 mag, I've loaded some of it 6 times now and no problems at all. It seems to work as well as anything else I have.
|
May 23, 2005, 09:09 PM | #5 |
Senior Member
Join Date: January 25, 2005
Location: Texas of course
Posts: 277
|
Yesterday at the range, a fellow with a Thompson was running thru a case.
I picked up *all* the brass It cleaned up pretty well and tonight I loaded up a couple of hundred rounds. No problems at all. BigSlick |
May 24, 2005, 05:48 PM | #6 |
Senior Member
Join Date: November 26, 2000
Location: Northeastern Ct.
Posts: 1,019
|
Haven't tried their 44 Mag but have 0 problems with the small truckload of Magtech 9mm brass I've acquired.
If you have any reservations make up a few min loads and see what it looks like. Take Care |
May 28, 2005, 04:36 PM | #7 |
Senior Member
Join Date: November 23, 2000
Location: Kansas City
Posts: 587
|
Thanks Gents!
I've been considering buying some of their brass (new/unfired). I don't shoot public ranges much anymore and thus I do not get to scavange brass like I used to do.
I have added some new calibers (.44 Special, 44 Magunum & 45 Colt) so I've been buying new brass. I recently purchased some Starline brass from Grafs but was tempted to try the MagTech. Next time I wil try the MagTech! I appreciate everyone's time & replies. Bob
__________________
"Onward thru the Fog" |
May 31, 2005, 11:04 PM | #8 |
Senior Member
Join Date: January 8, 2005
Location: the great state of Texas
Posts: 854
|
I just loaded up 200rds of the magtech 44mag brass and it worked out pretty good in super blackhawk and bisley. I pick up all the magtech I can at the range in 45acp. Ive loaded thousands of rounds of the stuff with out any problems.
|
|
|