|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 23, 2011, 07:09 PM | #1 |
Senior Member
Join Date: December 5, 2009
Location: Arkansas
Posts: 431
|
Makarov will not eject bullets when racking slide.
Hope I'm in the right section with this question. Bear with me guys I'm trying to explain this as simple as I can. On the American made auto's I've owned when I want to test a new mag I would load it up and put in gun and rack slide till mag was empty. I tried this with my Makarov with a used mag I bought and first bullet would go in chamber ready to fire as normal. I rack slide and bullet comes out but next round will not feed. clear the gun and try again and bullet not only would not feed but did a 180 and stuck in gun. I figure a bad mag. I try this with a different mag I used last weekend at the range shooting 200 rounds with this mag and no problems. Same problem. I never tried doing this with the second mag until today. Are Mak's supposed to do this. Sorry this turned into a book to read. Any help is always appreciated. Thanks guys.
|
August 23, 2011, 07:18 PM | #2 |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Sounds like you have a bad magazine. You can try to find out what is bad with the 2nd magazine buy visually comparing the feed lips, etc. of the two. On careful examination, one will probably look slightly different. It may just be a matter of bending a piece one way or another.
|
August 23, 2011, 08:33 PM | #3 |
Senior Member
Join Date: December 5, 2009
Location: Arkansas
Posts: 431
|
Found problem. Best swallow so you don't spray all over you're key board. Getting older and feeling weak handed tonight, and being a lefty didn't help. Instead of grasping slide with thumb and finger and racking I put right hand over back part of slide and racked. Only on short barreled auto's hand coveres ejection port. O Lord don't take me yet , I've got alot to learn. Thanks for the help, have a good nightzzzzzzzzzzzzzzzzz Any ridicule is always appreciated.
|
August 24, 2011, 06:53 PM | #4 |
Senior Member
Join Date: September 28, 2008
Posts: 10,442
|
Your invitation for ridicule is very tempting.
However, we have a policy of never insulting the intellectually challenged.
__________________
Walt Kelly, alias Pogo, sez: “Don't take life so serious, son, it ain't nohow permanent.” |
August 24, 2011, 08:00 PM | #5 |
Senior Member
Join Date: December 5, 2009
Location: Arkansas
Posts: 431
|
g.willikers that's good. I have to remember that to use at work. Thanks.
|
|
|