September 21, 2010, 02:02 PM | #1 |
Senior Member
Join Date: October 31, 2009
Location: central missouri
Posts: 246
|
does anyone know?
Does anyone know where i can get load data, or have a load using the 160g hornady ftx and imr powders. It is for a 30-30. My hornady manuel does not have these bullets in it, and i want to try them out and see how they do.
__________________
those who anger you are those who control you!!!! |
September 21, 2010, 02:21 PM | #2 |
Senior Member
Join Date: July 8, 2009
Location: davison, michigan
Posts: 665
|
Hodgdon's website shows 1 load.
IMR 8208 XBR 2.540" C.O.L. starting load 27 grs.--2045 ft/sec--33900 CUP max load 30 grs.--2207 ft/sec--37000 CUP Hornady's website shows a few loads as well here's the link: http://www.hornady.com/assets/files/...30_win_ftx.pdf
__________________
Guns have only two enemies, rust and politicians! Deer are amazing creatures....so please don't burn the sauteed onions and I'll pass on the steak sauce, thank you. Last edited by .284; September 21, 2010 at 02:26 PM. |
September 21, 2010, 02:27 PM | #3 |
Senior Member
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 3,055
|
Lets see if this will transfere;
Nope, image was not transferable. Here's the link to Hornady's data from their website. http://www.hornady.com/assets/files/...30_win_ftx.pdf Or try this one; http://www.hornady.com/support/downloads/load-data Tha't the main page for the FTX loading data. It appears the 160 30 cal. FTX is brand new. It should be a great compromise between 150 grain and 170's.
__________________
The more people I meet, the more I love my dog They're going to get their butts kicked over there this election. How come people can't spell and use words correctly? |
September 21, 2010, 03:04 PM | #4 |
Senior Member
Join Date: October 31, 2009
Location: central missouri
Posts: 246
|
thanks a bunch, i will try to find a load from this hornady data and post the results. thanks again
__________________
those who anger you are those who control you!!!! |
October 15, 2010, 10:10 PM | #5 |
Junior Member
Join Date: September 24, 2010
Posts: 4
|
go to the hornady website. there is a section on the right hand side that says ftx load notes. there are not only load specs, but notes telling you to shorten the brass etc.
|
October 16, 2010, 01:20 AM | #6 | ||
Senior Member
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 3,055
|
Quote:
Quote:
__________________
The more people I meet, the more I love my dog They're going to get their butts kicked over there this election. How come people can't spell and use words correctly? |
||
|
|