|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 9, 2009, 05:50 AM | #1 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Did I just come up with a wall hanger?
Folks,
Shot my 1851 Navy brass frame Sheriff's Model yesterday. Experienced a chain fire, I think due to poor cap fit. Now the arbor is loose. To get it tight I have to turn it about 10 degrees, which of course, prevents the wedge from going into the arbor How does one fix this and still maintain a shootable pistol? Did I turn it into a wall hanger?
__________________
Seek truth. Relax. Take a breath. |
March 9, 2009, 06:14 AM | #2 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
From your description I believe the recoil shield is damaged, and the only repair is a new frame.
However, the gun should still be shootable; if the cylinder locks up tight in battery (hammer at full cock) there's no reason it can't be shot. The wedge and bolt may be enough to hold it in battery even with the base of the arbor a bit loose. Unfortunately the situation will only get gradually worse over time, so at some point the cylinder will be loose in battery; when that happens, retire the gun. |
March 9, 2009, 06:57 AM | #3 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Not surprised
Mykeal,
Thanks for the quick response. I understand everything you say. The pistol does still lock up well. I am confident in shooting it the way it is (after reading your post.) The arbor doesn't wiggle. In point of fact, it is the only .36 I own. It is a mighty pretty pistol. It wouldn't hurt me to shoot it until it gets too loose, then just hang it up. I would never sell it the way it is. I could scavenge parts from it, but I actually like the idea of just looking at it.
__________________
Seek truth. Relax. Take a breath. |
March 9, 2009, 11:37 PM | #4 |
Senior Member
Join Date: January 18, 2006
Posts: 124
|
Next time buy a steel frame pistol. May not be pretty but will not stretch.
|
March 10, 2009, 06:01 AM | #5 |
Member
Join Date: December 5, 2008
Posts: 26
|
I have a Colt m1849 pocket steel framed replica that came loose during shooting without any chainfires or whatever. I used thread glue on the arbor to get it back in place. Screwed it in, put the barrel on and slammed in the wedge so everything is in the right position. Works fine today.
Another thing that can be done is to screw in the arbor and 'lock' it in place by using a steel punch or driver of some kind, by making a slight nick in the hammer channel where is comes through? / Daniel. |
March 10, 2009, 06:37 AM | #6 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
I agree and I agree - Two responses.
To dmicky,
I bought the pistol used at a gun show knowing their is a big difference in strength between brass and steel. I certainly would have preferred a steel frame but in this case, could not pass up the price. Were I able to look two weeks into the future at that time, I probably would still have done the deal. That does not mean I disagree with your advice. To dlon21, I like both of your ideas as well. I have the pistol pulled apart and when I get a moment to work on it I consider all of the advice. I am encouraged by both you and by Mykeal because you are both saying there is a good bit more life in this pistol. With a little work and some light loads, I think it'll be alright for about as long as I want it to shoot.
__________________
Seek truth. Relax. Take a breath. Last edited by Doc Hoy; March 10, 2009 at 06:45 AM. |
March 10, 2009, 07:00 AM | #7 | |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Quote:
I may be wrong but I don't believe the damage is to the arbor, but rather the frame itself. Cementing or staking the arbor won't correct that. Nonetheless, it's worth trying, and in any case the gun is still shootable as long as it will lock up. |
|
March 10, 2009, 09:04 AM | #8 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,175
|
Quote:
|
|
March 10, 2009, 09:30 AM | #9 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
I dunno Mykeal
Mykeal,
You are correct. I would've done all that but I might still have bought the pistol too. On a more serious note...I did pay close attention to the great info in your previous post. Bottm line is...that pistol is getting shot again this Sunday (if the weather holds.)
__________________
Seek truth. Relax. Take a breath. |
Thread Tools | Search this Thread |
|
|