Mossberg 590 Question.

FlaMike · November 15, 2005, 01:54 AM

I would like to purchase a Mossberg 590 for home security. I would like the metal trigger gaurd and metal safety. Are these ONLY available in the 590A1 or other 590 models as well? If so, which model numbers. Mossberg.com is not clear on the subject.

Also, if they are not available in other 590 models, can the metal trigger gaurd and safety be ordered to replace the plastic ones?

Any input and/or advice would be greatly appreciated.

Mike.

mtnboomer · November 15, 2005, 02:37 AM

If not, they can be retrofit as most all 500/590 models are alike (except 590DA).

L-2 · November 15, 2005, 10:49 AM

http://www.mossberg.com/pcatalog/lawprc.htm
Go with any of the part numbers listed on the, above, webpage. These are all 590A1 models and should all have the metal trigger-guard and safety.

"590A1 - 12 Ga., Heavy Barrel, Clean-out Tube, Metal Trigger Guard
& Metal Safety, Parkerized finish
51411 Synthetic 18.5" Bead CYL 6 $443

51273 (Same as 51411, except Marinecote Finish $509

51410 Speedfeed 18.5" Bead CYL 6 $478

51517 Synthetic 18.5" GRS CYL 6 $500

51518 Speedfeed 18.5" GRS CYL 6 $540

51520 Bantam 18.5" GRS CYL 6 $540

51660 Synthetic 20" Bead1 CYL 9 $496

51663 Synthetic 20" GRS1 CYL 9 $558

51668 Speedfeed 20"GRS1 CYL 9 $600"

Beach Accord · November 15, 2005, 08:33 PM

i have a 590 non A1 model and i replaced the plastic safety with an oversized aluminum vang comp one from brownells and modified it with an upgraded allen screw from home depot.

other than that i couldn't seem to find any way to separately order the metal trigger guard for my mossy, and lord knows i tried!

let me know if you are successful

-chris

FlaMike · November 19, 2005, 04:35 AM

Thanks for the responses guys. It is exactly what I needed.

-Mike
Lake Mary, FL

November 15, 2005, 01:54 AM	#1
FlaMike Junior Member Join Date: November 12, 2005 Location: Orlando Posts: 6	Mossberg 590 Question. I would like to purchase a Mossberg 590 for home security. I would like the metal trigger gaurd and metal safety. Are these ONLY available in the 590A1 or other 590 models as well? If so, which model numbers. Mossberg.com is not clear on the subject. Also, if they are not available in other 590 models, can the metal trigger gaurd and safety be ordered to replace the plastic ones? Any input and/or advice would be greatly appreciated. Mike.

November 15, 2005, 02:37 AM	#2
mtnboomer Senior Member Join Date: July 9, 2004 Location: Oklahoma by birth. America by the grace of God. Posts: 635	If not, they can be retrofit as most all 500/590 models are alike (except 590DA). __________________ Quando Omni Flunkus Moritati (If all else fails - play dead!) Support the Second Amendment. Join the NRA > http://www.nra.org < Oklahoma State & Big 12 - #1 GO POKES!!!!!

November 15, 2005, 10:49 AM	#3
L-2 Senior Member Join Date: September 8, 2004 Location: Nevada Posts: 523	http://www.mossberg.com/pcatalog/lawprc.htm Go with any of the part numbers listed on the, above, webpage. These are all 590A1 models and should all have the metal trigger-guard and safety. "590A1 - 12 Ga., Heavy Barrel, Clean-out Tube, Metal Trigger Guard & Metal Safety, Parkerized finish 51411 Synthetic 18.5" Bead CYL 6 $443 51273 (Same as 51411, except Marinecote Finish $509 51410 Speedfeed 18.5" Bead CYL 6 $478 51517 Synthetic 18.5" GRS CYL 6 $500 51518 Speedfeed 18.5" GRS CYL 6 $540 51520 Bantam 18.5" GRS CYL 6 $540 51660 Synthetic 20" Bead1 CYL 9 $496 51663 Synthetic 20" GRS1 CYL 9 $558 51668 Speedfeed 20"GRS1 CYL 9 $600" __________________ (former) Glock Armorer 1911 Armorer LEO (retired)

November 15, 2005, 08:33 PM	#4
Beach Accord Member Join Date: November 8, 2005 Posts: 18	i have a 590 non A1 model and i replaced the plastic safety with an oversized aluminum vang comp one from brownells and modified it with an upgraded allen screw from home depot. other than that i couldn't seem to find any way to separately order the metal trigger guard for my mossy, and lord knows i tried! let me know if you are successful -chris __________________ -Glock 19- -Glock 21SF- -S&W 686- -Mossberg 590- -Remington 870 MM-

November 19, 2005, 04:35 AM	#5
FlaMike Junior Member Join Date: November 12, 2005 Location: Orlando Posts: 6	Thanks for the responses guys. It is exactly what I needed. -Mike Lake Mary, FL