July 14, 2013, 04:58 PM | #1 |
Senior Member
Join Date: January 27, 2009
Location: Richmond,Va
Posts: 292
|
Mag loader
Maglula LULA Magazine Loader and Unloader AR-15 223 Remington 5.56mm NATO works just fine on the above, but much to my surprise it does not work on the mini-14 mag.
I need a faster way to load the mini-14 mag than by hand. Does anyone have a better way? |
July 16, 2013, 09:59 AM | #2 |
Senior Member
Join Date: January 27, 2009
Location: Richmond,Va
Posts: 292
|
Really, 114 views and no reply, amazeing I expected more from TFL.
This is what I found at Midway and will try. Command Arms ML556 magazline loader AR-15, (Ruger Mini-14) 223 Remington Polymer Product#126435 $11.49 W/ tax and shipping $18.76. |
July 16, 2013, 08:49 PM | #3 |
Senior Member
Join Date: January 5, 2009
Location: Just off Route 66
Posts: 5,067
|
Ok, here's a reply. A) I don't own a mini-14 so I can't answer your question. It does seem that you answered it yourself.
I did have a Mini-30 with 4 20 round mags, 5 5 round mags and 1 10 round mag. Never had a problem loading them by hand, never. Jim
__________________
Si vis pacem, para bellum |
July 24, 2013, 10:07 PM | #4 |
Senior Member
Join Date: February 17, 2009
Posts: 1,089
|
Geez....So no one had the answer for you and you had to look for yourself, .....
I hope that sounds as snide as your comment. A little more patience will go a lot farther than being a brat. Well , got that off of my chest. BTW,Google says.... Maglula also makes a StripLULA for your Mini 14. |
August 4, 2013, 01:57 AM | #5 |
Senior Member
Join Date: January 27, 2009
Location: Richmond,Va
Posts: 292
|
(Ruger Mini-14) 223 Remington Polymer Product#126435 $11.49 W/ tax and shipping $18.76. (Midway) Works fine, happy with it.
Oh (bfoosh006) as to what you see as a lack of patience, on my part, with TFL, I view as more a matter of surprise and I find your sarcastic attitude really not in keeping the helpful attitude one usually finds on TFL. Realizing that my post has offended you I apologize to ever one else on the forum that my post has offended. As for you, I think you'll get over it, I'm over it. |
August 4, 2013, 10:28 AM | #6 |
Member
Join Date: November 9, 2008
Posts: 71
|
The Strip Lula works with mini 14 mags with or without stripper clips. loose rounds are just a little tougher to load a 30 round. I put all of my 223/556 on stripper clips, and it's really fast.
|
August 5, 2013, 08:45 PM | #7 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
AR and Mini-14 mags are not interchangeable and use a completely different retention design. The LULA I have is meant for use strictly with AR mags and the latch is located to retain specifically AR mags.
|
August 6, 2013, 06:59 AM | #8 |
Member
Join Date: November 9, 2008
Posts: 71
|
There are 2 versions of the strip lula, one for mini 14, and one for AR. I have the one designed for mini 14 mags.
|
August 6, 2013, 07:27 AM | #9 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
OP says he has an AR loader but it won't work with Mini 14 mags. DUH!!!
|
|
|