|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 20, 2013, 02:24 PM | #1 |
Member
Join Date: January 15, 2013
Location: Townsville, NC
Posts: 93
|
Which .45acp Xdm or Glock or??????
Hello all, i'm currently cc an XD9 Subcompact, which is awesome, i feel comfortable enough with the platform that i'm having a hard time looking at anything else. Except, I long for .45acp. I have a 1911 in .45acp, but it doesn't get carried. I have held several Glock 30/36's trying to get a feel for the grip, but it just feels too wide for cc work. The xdm 3.8 looks mean as can be, but is rather hard to come by around my parts. I've also been playing with the idea of the XD45 compact, but cant find one anywhere to hold and fondle.
--Anyone have experience(by experience i mean at least 2-300 rounds fired from each) with both guns? --Pros/Cons of each? --Good price point for both used and new around the NC area? --Any other guns in that price range -/+ a few dollars(I would never spend more than $700 on a polymer gun, that's 1911 range)? The gun will be a concealed carry piece, as well as for plinking(what good is a gun you never shoot?), and i may use it in competition(probably as a backup to the 1911 i'm working on). I more than likely will use it for HD as well, when the 12 gauge is more than I need. |
June 20, 2013, 02:28 PM | #2 |
Senior Member
Join Date: December 5, 2010
Location: Miami, Florida
Posts: 6,429
|
I'd definitely go with the Glock 30sf, 30s, or 36. In that order.
Parts are always available and with a gun for CCW that you should be training extensively with, you're going to need part eventually. Glock's are the easiest parts to come across. Both factory and aftermarket. (I recommend factory) 1911's have nothing "drop-in" and I think they're amazing range guns in this modern time. Those to carry them, are probably great tinkerers or have no problems with them being high maintenance. XD's? I do not like for the life of me. PM for more details if you'd like. |
June 20, 2013, 02:52 PM | #3 |
Member
Join Date: January 15, 2013
Location: Townsville, NC
Posts: 93
|
I've owned two XD9sc's now, the first, i stippled the grip to my comfort, replaced all of the pins(striker retainer pin was upgraded to a rolled pin) with stainless, polished the internals myself, updgraded the striker, and the corresponding springs, polished the barrel and controls(slide stop/release, takedown lever, mag release button). Most of the work was cosmetic for my own pleasure and to show off my handywork. The parts were easy to find, and for the most part inexpensive. The only reason i got rid of it was to try out another gun, a pt92, which i promptly traded for a Norinco 1911. The one i have currently is bone stock, only because my girlfriend forbids me from suping it up.
Last edited by haliwa04; June 20, 2013 at 03:07 PM. |
June 20, 2013, 03:16 PM | #4 |
Senior Member
Join Date: April 22, 2007
Posts: 1,996
|
OP, check out the Kahr CW45. I have put 500 virtually trouble free rounds through my CW45 thus far. The gun is accurate, lightweight and very easy to carry.
|
June 20, 2013, 03:25 PM | #5 |
Member
Join Date: January 15, 2013
Location: Townsville, NC
Posts: 93
|
<quote>OP, check out the Kahr CW45. I have put 500 virtually trouble free rounds through my CW45 thus far. The gun is accurate, lightweight and very easy to carry.</quote>
What's the trigger like? I know the cw40 i played with had a very long reset, which i could deal with after a lot of retraining. |
June 20, 2013, 08:58 PM | #6 |
Senior Member
Join Date: January 25, 2013
Location: West Virginia
Posts: 137
|
From the xd/ glock standpoint I'm very pro springfield. I love both the xd and xdm line. As far as glocks go I've only had one make it through one of my classes without issues. Usually there nothing serious but it's always something! I don't trust them especially the 45 acp ones. I like the way they look, I like the way the shoot, I like the way they feel. But at the same time I hate them. Springfields aren't perfect either but for me there 100 times better than glock.
On another note since your gonna cc this. Have you looked into the xds? I haven't handled one yet but it is on the top of my list. That gives you the 45acp, great size to cc, and the quality of Springfield. |
June 20, 2013, 09:35 PM | #7 |
Junior member
Join Date: March 2, 2013
Location: Heart of Texas
Posts: 788
|
I have experience with both pistols and would definitely recommend the XDm 3.8 C over the G30 any day of the week. They're built stronger and the thickness of the slide rails raises the bore-axis slightly but I could never tell it shooting my XDm 4.5 in .45 ACP, including a healthy number of 185 gr. Golden Saber handloads equivalent to the Rem. 185 gr. Golden Saber +P factory load and the 230 gr. GS loaded above 900 FPS. The XDm has a match grade barrel with conventional rifling so there are no issues in shooting cast lead bullets. My particular favorite is the 200 gr. SWC and the XDm was modified specifically for them. There are a very good number of parts available for customizing and I installed a PRP trigger kit in mine that gave me a fantastic trigger. The 4" Service Compact is also a great option but they are not modified for shooting LSWCs like the XDm is. Check out www.xdtalk.com
Then there's this option. I sold my XDm to my shooting partner after I bought a Ruger SR9 that is simply amazing so I knew I'd have to have the SR45 and it's getting to a break-in point where it shows equal promise to the SR9. After 300 rounds fired through either pistol you'll get a better trigger than any other polymer framed striker fired pistol. The SR45 is also the narrowest of the bunch. There are enough people clamoring for the SR45c that it shouldn't be far away now. My shooting partner has an SR9c that is his carry pistol that he feels is the very best he's used yet including the G19, G26, S/S P-239 and the S&W Shield which he's fixin to sell, BTW. My SR45 is exceptionally accurate. It shares features of the XDm as far as strength, has a stainless barrel and I bought for $440. |
June 20, 2013, 09:57 PM | #8 |
Senior Member
Join Date: May 13, 2012
Location: SW FL
Posts: 953
|
SR45 is $409 shipped right now as we speak.
|
June 20, 2013, 10:01 PM | #9 |
Junior member
Join Date: March 2, 2013
Location: Heart of Texas
Posts: 788
|
That's an outstanding price. I thought I did very well at $440.
|
June 20, 2013, 10:44 PM | #10 |
Member
Join Date: April 6, 2013
Location: Central Wisconsin
Posts: 43
|
I have an XD45 compact. I originally wanted, and had ordered, a G19 for CC. The wait time was long and I eventually (almost) decided on a G30. Later that week I handled the XD and couldn't believe the difference. The G30 felt almost like gripping a Pringles can, whereas the XD felt only marginaly wider than a 1911 (which I had carried previously in Govt model form). I have so far run mine through about 600 rounds and haven't had any failures other than two FTF, both of those were with my light loads using cast bullets. Now looking back I would take the XD twice before I took that Block30 once...
|
June 21, 2013, 03:00 PM | #11 | |
Member
Join Date: January 15, 2013
Location: Townsville, NC
Posts: 93
|
Quote:
And the SR45 felt like awesomeness in my hand, but I might as well carry my 1911. I'd still like to have one for a nightstand bad guy disappearance wand. What would be a reasonable price for a used Xdm, i see the prices from $550 to astronomical $700 levels. Buds has them for around $684, and i've considered layaway at a LGS |
|
June 21, 2013, 03:17 PM | #12 |
Senior Member
Join Date: May 13, 2012
Location: SW FL
Posts: 953
|
3.8 XDm is $569 right now online. Add $20-$25 for a transfer fee and you're right around $600
|
June 21, 2013, 04:02 PM | #13 |
Senior Member
Join Date: June 17, 2013
Posts: 168
|
For CC I don't see how you can beat a nice, flat compact single-stack .45. Used ones can be had in the $400 range, or less.
|
June 21, 2013, 04:29 PM | #14 | |
Member
Join Date: January 15, 2013
Location: Townsville, NC
Posts: 93
|
Quote:
|
|
June 21, 2013, 04:31 PM | #15 |
Senior Member
Join Date: August 22, 2012
Posts: 1,031
|
I like my G30. I prefer my 1991 SS Commander, tho.
|
June 21, 2013, 04:36 PM | #16 |
Senior Member
Join Date: May 13, 2012
Location: SW FL
Posts: 953
|
You can get a brand new XD45 for 450 with the kit (holster, mags, loader) or a Ruger SR45 for $409
|
June 21, 2013, 04:55 PM | #17 | |
Member
Join Date: January 15, 2013
Location: Townsville, NC
Posts: 93
|
Quote:
|
|
June 21, 2013, 05:11 PM | #18 | |
Senior Member
Join Date: April 22, 2007
Posts: 1,996
|
Quote:
|
|
June 21, 2013, 06:06 PM | #19 |
Senior Member
Join Date: May 13, 2012
Location: SW FL
Posts: 953
|
|
June 21, 2013, 07:10 PM | #20 |
Senior Member
Join Date: August 10, 2012
Location: Utah
Posts: 232
|
Springfield XDs
OP... I have a Springer tactical with 5" bbl and short and extended mags. Great gun, more accurate than Glock (according to those who test and shoot both). Last year, I got the XDs in .45 ACP. It's my carry gun for 'the Theater' or other venues where the bigger Springer pokes me too much.
Never a failure to feed, go into battery, no stovepipes, easy to work on, and custom parts are available, though seems less than Glock. One vote for Springfield!
__________________
"Figure Out What You Believe and STAND YOUR GROUND!" Nemo Me Impune Lacessit Lots of Cast Iron to Cook With... and a few defensive firearms, too! |
June 21, 2013, 09:15 PM | #21 | |
Junior member
Join Date: March 2, 2013
Location: Heart of Texas
Posts: 788
|
Quote:
|
|
June 22, 2013, 04:39 PM | #22 |
Senior Member
Join Date: January 26, 2011
Location: USA
Posts: 714
|
I like Glocks and have owned quite a few of them, but I'm a XD guy these days.
I like the grip angle and the trigger better than on the Glock. I also have become fond of the grip safety. Last edited by peacefulgary; June 22, 2013 at 04:48 PM. |
June 22, 2013, 06:02 PM | #23 |
Senior Member
Join Date: August 10, 2012
Location: Utah
Posts: 232
|
Check the fit and feel....
OP... When I was making my decision on polymer guns, I handled many, including the Glocks and Springers. I had no preconceptions, except that the Springer passed the Glock torture test with flying colors and was reportedly more accurate the the Glock past 25 yds or so.
Anyway, the LGS salesman suggested I shut my eyes and bring the guns up to firing position. The Glocks, because of the grip angle, consistently were pointed high. The Springfield came up close to 'on target' i read that they more closely match John Brownings original grip angle. Haven't checked to be honest. Don't care either, because the gun just 'fit' better in my ham-hands. I shoot left. I liked the grip and trigger safeties. The slide release for right-handers is a non-issue as I rack the slide with a new, full magazine anyway. My $0.02 -Smokiniron
__________________
"Figure Out What You Believe and STAND YOUR GROUND!" Nemo Me Impune Lacessit Lots of Cast Iron to Cook With... and a few defensive firearms, too! |
June 22, 2013, 06:16 PM | #24 |
Junior member
Join Date: March 2, 2013
Location: Heart of Texas
Posts: 788
|
smokiniron, you're correct. The XD/XDm use John Browning's grip angle that he researched more than some may realize. Most combat pistols use the same angle which Ruger has always done. The Mark I, II, III .22 LR pistols use the Luger angle as Glock does. Raising a pistol overhead in the dark or with your eyes closed and bringing it to bare, then opening your eyes: the Browning grip angle is much more likely to be concluded by the alignment of the sights compared to the Luger angle by most shooters.
My Ruger recommendation withstanding, I'll state that the XD Service Compact with a 4" barrel and shortened grip would be an excellent choice and since the introduction of the XDm and later the XDs, XD prices have continued a trend of getting lower in price. But one must realize that XD .45 ACPs will not reliably function with LSWC bullets and that may or may not be a concern for someone looking for an excellent carry pistol. Last edited by 57K; June 22, 2013 at 06:21 PM. |
June 23, 2013, 04:29 PM | #25 | |
Senior Member
Join Date: August 10, 2012
Location: Utah
Posts: 232
|
57K... agreed
Thanks for your comments on Browning's design. I live in Utah and have seen his father's shop in Illinois several times. The man was pure genius...
Quote:
__________________
"Figure Out What You Believe and STAND YOUR GROUND!" Nemo Me Impune Lacessit Lots of Cast Iron to Cook With... and a few defensive firearms, too! |
|
Tags |
.45acp , concealed , glock , springfield |
|
|