The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools Search this Thread
Old January 26, 2013, 05:56 AM   #1
pwillie
Senior Member
 
Join Date: June 8, 2009
Location: Alabama
Posts: 115
25-06 punched out to 257 Weatherby

Anybody ever do this,take a 25-06 and have it punched to accept a 257 Weatherby>
__________________
"Happy to be here"
pwillie is offline  
Old January 26, 2013, 06:07 AM   #2
natman
Senior Member
 
Join Date: June 24, 2008
Posts: 2,604
It could be done, but you would have to modify the bolt face for the larger magnum cartridge and change the feed rails / magazine in order to feed the fatter cases.

Not worth the trouble, IMO.
natman is offline  
Old January 26, 2013, 06:12 AM   #3
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 8,273
You do whatever makes you happy.

IMO,the 25-06 is already overbore .That means you can't utilize all the powder space you have.

I suppose in theory if you look at the books,you see you can get a bit more from the Wby,but not that much.

Aside from the gunsmith bill,which includes modifying the boltface,etc for a belted case,and making sure it all feeds.Are you going to shoot factory,or load?Add dies,brass,etc.Price them.

You are going from a fairly common brass and ammo,to an exotic.

Now,exactly what is it you can do with a .257 Wby that you cannot do with a 25-06?

Dreaming is fun,isn't it? Getting it done can cost a lot of money.You could spend that shooting your 25-06.

The skill you gain might make your 25-06 better than the 257 Wby.
HiBC is offline  
Old January 26, 2013, 07:27 AM   #4
PawPaw
Senior Member
 
Join Date: December 24, 2010
Location: Central Louisiana
Posts: 3,137
Concur. It can be done, but the cost of the conversion might not be satisfying. If you want to get a little more out of your .25-06, you might consider the Ackley Improved. No mods to the bolt face or feed lips, and the chamber will still shoot factory ammo if necessary. I personally don't see the utility, but lots of folks like Ackley chambers.
__________________
Dennis Dezendorf

http://pawpawshouse.blogspot.com
PawPaw is offline  
Old January 26, 2013, 07:46 AM   #5
steveNChunter
Senior Member
 
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
I agree with PawPaw. If you're going to change anything with your .25-06, making it an Ackley Improved would make alot more sense than .257 weatherby. Even as an AI you're not gaining much. You will spend alot more buying ammo or loading for the weatherby, and will not gain enough ballistically to ever tell the difference. The .25-06 is already close enough to perfect as it is IMO. Its fun to play around with ideas and possibilities in your head though. If you're in love with the .257 wby just buy another rifle already chambered in it and you will have 2 good quarterbores for about the same money it would have taken to make your '06 into a weatherby.

What kind of rifle is your .25-06? Whats the barrel length and twist rate?
__________________
DEO VINDICE
steveNChunter is offline  
Old January 26, 2013, 08:40 AM   #6
tjh
Senior Member
 
Join Date: September 25, 2009
Location: North Central Ohio
Posts: 171
To get the most out of a 25-06 AI . your going to need alonger barrel 28-30" then you'll have a long range varmint /predator gun .
tjh is offline  
Old January 26, 2013, 09:44 AM   #7
jim in anchorage
Member
 
Join Date: January 14, 2013
Posts: 19
I hate this. OP wants a .257 Weatherby. How can you gun guys not understand this? A .257 Weatherby, not a .257 Roberts improved or a blown out 25-06 or any other practical, sensible boring solution.

I get this all the time when I mention converting my .375 to .378."Oh no it kicks too hard!" "Brass costs too much!" "Convert to .375 improved-way easier."

No I want a .378 Weatherby. Don't care how hard it kicks, how much powder it burns or what brass costs. That's what I want.

To OP-the .257 was designed with standard [30-06] actions in mind. Cake walk rechamber. Open bolt face, quick work on the feed rails, rechamber and done. Go for it, have fun, don't listen to these Studebaker driving old ladies.

Course maybe I am not the best to ask. I am also the only person I know that owns a .223WSSM

.
jim in anchorage is offline  
Old January 26, 2013, 09:49 AM   #8
jimbob86
Junior member
 
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
Would it not be more economical to just buy a new .257 Weatherby than spend the money destroying a perfectly good .25-06?
jimbob86 is offline  
Old January 26, 2013, 10:00 AM   #9
jim in anchorage
Member
 
Join Date: January 14, 2013
Posts: 19
Destroying? Explain.
jim in anchorage is offline  
Old January 26, 2013, 10:33 AM   #10
PawPaw
Senior Member
 
Join Date: December 24, 2010
Location: Central Louisiana
Posts: 3,137
Quote:
Originally Posted by jim in anchorage
I hate this. OP wants a .257 Weatherby. How can you gun guys not understand this? A .257 Weatherby, not a .257 Roberts improved or a blown out 25-06 or any other practical, sensible boring solution.

I get this all the time when I mention converting my .375 to .378."Oh no it kicks too hard!" "Brass costs too much!" "Convert to .375 improved-way easier."
Your point is well-taken, Jim, but he did ask. And, the answer is that it can be done, it just might be more economical to do something else. No one's telling him that he shouldn't do it, nor that he shouldn't buy a .257 Weatherby.

Sure, it could be done, and if her really wants it, there's no reason not to do it. But, he did ask if anyone had done it, and the inferred question was how hard or expensive it might be.

If you want a .378 Weatherby, by all means, get a .378 Weatherby.
__________________
Dennis Dezendorf

http://pawpawshouse.blogspot.com
PawPaw is offline  
Old January 26, 2013, 11:07 AM   #11
jim in anchorage
Member
 
Join Date: January 14, 2013
Posts: 19
I think before this thread go's any further we need the OP to weigh in with what he wants. Just a can it be done question, or here's what I have and what would it take to do this?

I just don't like the "if you want a .257, buy a 257" answers. It's like when I ask about making my mini 14 more accurate and I get a flood of "trade it for a AR" replies. That's not what I asked
jim in anchorage is offline  
Old January 26, 2013, 03:49 PM   #12
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 28,675
Sure, it can be done...

But consider the cost/benefit.

#1)The .25-06 is already over bore, with all but the the slowest powders. The .257 Wby is even worse in the respect.
#2) Weatherby barrels are freebored, and normally 26". This plus the large case capacity is what gives them their velocity advantage. You could convert your .25-06, spend the time and money, and wind up with a rifle that might not even have a 100fps velocity advantage over what you started with.
#3) The converted rifle might not shoot as accurately as what you have right now. The work is going to change the harmonics of the gun, and while you may be able to find a load that shoots as well, or better than what you have now, there is no guarantee.

So, the cons are cost, potential change (loss) of accuracy, and minimal velocity gain (possible).

On the other hand, things might go just right and you could wind up with an accurate rifle with a significant (meaning usable) velocity increase. Its a roll of the dice which way, and how far things will go. Your gun, your money, your choice.

Myself, I would just buy a rifle already made in the Wby round, but that's just me.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is online now  
Old January 26, 2013, 04:56 PM   #13
steveNChunter
Senior Member
 
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
I beat around the bush in my first post so Ill be more blunt in this one. You are better off with the .25-06 you already have than if you could make it a .257 wby. for free. There. I said it.

Can it be done? Yes anything can be done for the right price.

Should it be done? NO

Now if you will excuse me, Ive gotta hop in my Studebaker and get down the road. Im late for the bingo tournament
__________________
DEO VINDICE
steveNChunter is offline  
Old January 26, 2013, 05:13 PM   #14
shootniron
Senior Member
 
Join Date: April 16, 2011
Location: Georgia
Posts: 1,599
Quote:
You are better off with the .25-06 you already have than if you could make it a .257 wby. for free
More opinion...

To the OP, just go buy a .257WM Vanguard for not much more than a conversion would cost...and I would be willing to bet that you would think it was money well spent. The .257WM is the rock star of the 25cals.
shootniron is offline  
Old January 26, 2013, 05:21 PM   #15
steveNChunter
Senior Member
 
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
Quote:
To the OP, just go buy a .257WM Vanguard for not much more than a conversion would cost..
I actually suggested that idea in my first post.

I have nothing against the .257, its a fine caliber. If you want it, by all means have one. This po' boy just cant justify the cost of ammo for it.
__________________
DEO VINDICE
steveNChunter is offline  
Old January 26, 2013, 05:53 PM   #16
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 8,273
I did begin my reply with "You do whatever makes you happy"

Studebakers are extremely cool.Wish I had about a 47-48-49 coupe..

Accurize a Mini-14?You do whatever makes you happy.

Studebaker!I'm going to look on Craigslist just to see whats out there,but I doubt I can afford one.Those things are valuable.
HiBC is offline  
Old January 26, 2013, 06:35 PM   #17
steveNChunter
Senior Member
 
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
Quote:
"You do whatever makes you happy"
BINGO!
__________________
DEO VINDICE
steveNChunter is offline  
Old January 26, 2013, 07:25 PM   #18
reynolds357
Senior Member
 
Join Date: December 10, 2012
Posts: 6,161
Buy a Vanguard 2 .257 Wby. I paid $425 for mine with one of the decent stocks on it. In my opinion, if I did anything to a .25-06 it would be to make it an Ackley. The cost of anything else weighted against the cost of the V2 does not really justify the conversion unless it is just something you want. In my opinion, the .257 WBY is a much flatter cartridge than the .25-06. I have both. You can make the WBY scream.
reynolds357 is offline  
Old January 26, 2013, 07:57 PM   #19
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
I had a customer propose this same thing a couple of years ago. Yes, it can be done.

As others have pointed out, it does involve a lot of other work, and that runs the cost up to the point where you can almost buy a Weatherby and trade the 25-06 towards it to reduce the cost even further. Barrel ($450ish), open the bolt face ($100-ish), open the feed rails ($50-ish), reblue ($100), guesstimate about 200 fps extra velocity at best (check the ballistics tables). Compare that to trading and buying a new Weatherby ($1200 for the Weatherby and maybe $300ish trade-in).

So you may ask, "what did his customer decide to do?" Good question! We barreled the rifle in 6mm-06 with a 1:7" barrel and loaded up 115 gr Bergers that launched at 3400 fps, faster and flatter than the 25-06. Totally different direction, but it works.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old January 26, 2013, 08:58 PM   #20
Mobuck
Junior member
 
Join Date: February 2, 2010
Posts: 6,846
Considering the price of a Vanguard, it's more economical to just buy a 257 Wby but the Vanguard 257 only has a 24" barrel.
To the OP, I'll tell him flat out that a 24" 257 Wby is disappointing. You need the 26" barrel to make the 257 significantly faster than a 25/06. I have both and have shot both over a Chrony and can honestly say there's not all that much difference between the two cartridges in a 24" barrel.
Mobuck is offline  
Old January 26, 2013, 09:20 PM   #21
shootniron
Senior Member
 
Join Date: April 16, 2011
Location: Georgia
Posts: 1,599
Quote:
Considering the price of a Vanguard, it's more economical to just buy a 257 Wby but the Vanguard 257 only has a 24" barrel.
To the OP, I'll tell him flat out that a 24" 257 Wby is disappointing. You need the 26" barrel to make the 257 significantly faster than a 25/06. I have both and have shot both over a Chrony and can honestly say there's not all that much difference between the two cartridges in a 24" barrel.
Mobuck is online now Report Post
You are not the only one to have both and the .257 in the 24" barrel still shoots flatter than the 25-06. Guns of identical configurations can and will develop different muzzle velocities from the same ammo due to slightly different chamber and barrel dimensions...thus not all Vanguards with a 24" barrel will have a low muzzle velocity.

Last edited by shootniron; January 26, 2013 at 09:29 PM.
shootniron is offline  
Old January 26, 2013, 09:31 PM   #22
steveNChunter
Senior Member
 
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
Quote:
We barreled the rifle in 6mm-06 with a 1:7" barrel
Best idea of the thread
__________________
DEO VINDICE
steveNChunter is offline  
Old January 26, 2013, 11:18 PM   #23
boattale
Senior Member
 
Join Date: November 28, 2012
Posts: 118
I think you'd be a lot happier with a .375 H&H. (am I the only person who is driven fruit by people not answering a question but instead offering completely off the wall unrelated suggestions?)
__________________
Its all downhill from here. Except the parts that are uphill.
boattale is offline  
Old January 26, 2013, 11:32 PM   #24
jimbob86
Junior member
 
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
Quote:
Destroying? Explain.
I was mistaken- $150 bucks would have been destroyed as well as the 25-06!

If I have a 25-06, spend 700 bucks to change it into a short barreled .257 WBY, instead of picking up the used .257WBY Vanguard that I just saw at Cabela's in LaVista yesterday ..... lets do the financial Algebra on that:

1ea (25-06) x TtG +$700 = 1ea (.257WBY), TtG= taking to gunsmith and having the work done.

or

1ea (25-06) x GtC +$550= 1ea (25-06)+ 1ea (.257WBY) + $150, GtC= Go to Cabela's and pick that up!

Compare the two plans and you have either 1 rifle OR 2 rifles and $150 bucks. Make the first choice and you have less ...... Where did the 25-06 and the cash go? They don't exist, for you. You wasted them. You may as well have set them on fire. They are gone.

The math will not lie.
jimbob86 is offline  
Old January 27, 2013, 01:55 AM   #25
jim in anchorage
Member
 
Join Date: January 14, 2013
Posts: 19
Sorry I don't get the $700 gunsmith bill. To run in a chambering reamer, open the bolt face and fix the feed rails? What 2 hours work?
jim in anchorage is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.12220 seconds with 10 queries