PRI forearm/Swan sleeve mounting problems

mrseven70 · December 19, 2008, 12:26 AM

So I'm trying to build my own upper. I've got the barrel on, torqued it three times and I'm trying to put on the PRI forearm and get the two screws in the Swan sleeve to align with the holes on the top of the forearm, while also trying to keep the holes aligned on the side of the Swan sleeve with the rail of the flattop receiver. Does that make sense? I can only get one sets to align. Where am I messing up? I can't tighten both the front screws and back bolts of the Swan sleeve.

mrseven70 · December 20, 2008, 11:55 AM

So I fixed my own problem. Called the company and if you loosen the 4 screws on the top rail it will slide back and forth a little so you can line up the screws holes in the rail and on the sleeve. Boy do I feel stupid.

December 19, 2008, 12:26 AM	#1
mrseven70 Junior Member Join Date: July 14, 2006 Posts: 12	PRI forearm/Swan sleeve mounting problems So I'm trying to build my own upper. I've got the barrel on, torqued it three times and I'm trying to put on the PRI forearm and get the two screws in the Swan sleeve to align with the holes on the top of the forearm, while also trying to keep the holes aligned on the side of the Swan sleeve with the rail of the flattop receiver. Does that make sense? I can only get one sets to align. Where am I messing up? I can't tighten both the front screws and back bolts of the Swan sleeve.

December 20, 2008, 11:55 AM	#2
mrseven70 Junior Member Join Date: July 14, 2006 Posts: 12	Mounting Mk12 Swan sleeve So I fixed my own problem. Called the company and if you loosen the 4 screws on the top rail it will slide back and forth a little so you can line up the screws holes in the rail and on the sleeve. Boy do I feel stupid.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search