|
October 30, 2012, 05:47 PM
|
#1 |
|
Junior Member
Join Date: October 30, 2012
Location: Idaho
Posts: 3
|
Winchester Model 94 30-30
Hello! I recently acquired a 1973 Winchester Model 94 in 30-30. I got it home and tore into it, only to find that it has a broken ejector. The end of the ejector that the spring rides on is broken off. Does anybody know where I can purchase one of these? I've been browsing around online for a while with no prevail. Pictures Attached. EDIT--P.S. the serial number is 3923487
__________________
-D33R- |
|
|
October 30, 2012, 06:20 PM
|
#2 |
|
Senior Member
Join Date: September 16, 2007
Posts: 712
|
robhof
Check both Ebay and Gunbroker, most internal parts are interchangeable except from the top eject and angle eject models. I have a pre 64 model and have replaced a few internal parts with post 64 parts with no problems.
|
|
|
|
October 30, 2012, 07:57 PM
|
#3 |
|
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
Google "Numrich Arms", they usually have the parts.
. |
|
|
|
October 31, 2012, 04:22 PM
|
#4 |
|
Junior Member
Join Date: October 30, 2012
Location: Idaho
Posts: 3
|
Thanks guys! Found one off of a 71-72 model on Ebay! Just ordered it!
__________________
-D33R- |
|
|
|
November 7, 2012, 11:28 AM
|
#5 |
|
Junior Member
Join Date: October 30, 2012
Location: Idaho
Posts: 3
|
Took a while to get the ejector here, but got it installed and took it out shooting for the first time yesterday! Cycled great and shot about a 2.5 inch group free standing with the open sights at 100 yards, so I'm satisfied with my purchase! Again, Thanks for everything!
__________________
-D33R- |
|
|
 |
| Tags |
| 30-30 , ejector , model 94 , parts , winchester |
| Thread Tools | Search this Thread |
|
|
