|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 4, 2013, 12:47 AM | #1 |
Member
Join Date: January 18, 2013
Location: Orange County
Posts: 71
|
savage 64 magazine help needed
i want to take my mags apart for a good cleaning but cant get the base plate off, im pulling on the little tab pretty hard and it only moves a millimeter or so, is there some trick to it that im not seeing?
thanks for any help, david |
June 4, 2013, 09:17 AM | #2 |
Member
Join Date: February 26, 2013
Posts: 37
|
If I remember right I took a screw driver and place it on the lip then tapped it with the palm of my hand. I also took a file and cleaned the top of the mag up, I even cut my spring about 1/8th of an inch. I saw a guy on youtube do this and my Savage feeds perfect.
|
|
|