|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 18, 2012, 03:48 PM | #1 |
Junior Member
Join Date: October 14, 2010
Posts: 1
|
Browning Medalists and Chalenger clips
Hi,
I have just gotten back from the range and my proof of concept is confirmed. All you Browning Medalists and Chalenger 1 owners probably know just how hard it is to get clips for them. The ones being sold as replacement clips do not work in either of my 1968 Medalists or my 1969 Chalenger. So here's a get around that works perfectly in all three of my brownings. I took two of the spare clips for my old Buckmark Sillouette and found that by building up the front of the clip at the bottom so that it contacts the frame the same time that the rear notch latches these clips will actually function better than the factory ones. (at least in my three they do). I originally used a piece of plastic and epoxy to try it, but now that I know it works I've made it permanent with JB Weld. These clips won't be flush with the bottom of the grip but now I have the four clips I needed to compete with my Medalists. Be sure to get the older style Buckmark clips, the ones with the notch in the bottom rear. Newer design won't work. Guy |
|
|