|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 18, 2006, 06:20 PM | #1 |
Member
Join Date: May 24, 2005
Posts: 20
|
rcbs dies in lee press?
i just bought a set of rcbs cowboy dies 357/38 special. can i still use the lee shell holders?
|
January 18, 2006, 10:33 PM | #2 |
Senior Member
Join Date: January 29, 2005
Location: Up Nort
Posts: 419
|
Yes
Yes, the shell holders shold work as long as they are press shell holders and nor the shell holders for the LEE Auto Prime.
JSF |
January 18, 2006, 11:38 PM | #3 |
Senior Member
Join Date: February 2, 2000
Location: Wyoming
Posts: 2,328
|
Most modern brands will interchange - Lee and RCBS being two. Check if you're not sure, but in this case - be assured - they will work.
__________________
What part of "... shall not be infringed..." don't you understand? |
January 19, 2006, 12:25 AM | #4 |
Senior Member
Join Date: January 17, 2006
Posts: 379
|
I believe they're both 7/8-14 on the threads.
|
January 20, 2006, 09:27 AM | #5 |
Senior Member
Join Date: January 1, 2000
Location: Roanoke, Virginia
Posts: 2,678
|
RCBS dies on a LEE press?
YES !
Until recently, Lee dies were shorter than "standard" dies. I have a 35 year old LYMAN Spar-T press that requires a smaller locking ring than the round ones. The Lee locking rings work fine... |
January 20, 2006, 08:43 PM | #6 |
Member
Join Date: May 24, 2005
Posts: 20
|
thanks for the info guys i appreciate it denny
|
|
|