|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 30, 2014, 08:39 PM | #1 |
Senior Member
Join Date: June 7, 2007
Location: Charlottesville, VA
Posts: 941
|
Antique percussion shotgun
Over the last weekend I was at my brother's home and we looked through some things our dad had. One thing we found was a double barrel percussion shotgun. The gun is in such bad shape it would not be worth $100 for scrap metal. It appears to be in 20 gauge. I am trying to clean it up so will will be a decent looking wall hanger. The maker which is engraved on the side locks is Norris & Brother. On the barrel rib in a very lightly engraved manner is what I believe to be the words "Warrented Trust". The only thing I can find out is that the company was in operation sometime during the Civil War. I know this may be a long shot but if anyone knows anything about Norris & Brother I would appreciate any information given. I will never try to fire it because of its condition but it would look nice on the wall.
|
January 30, 2014, 10:36 PM | #2 |
Senior Member
Join Date: February 3, 2013
Posts: 1,235
|
Do not clean anything until you know what you have.
http://www.collectorebooks.com/gregg...ns/Lot-446.htm Last edited by Dreaming100Straight; January 30, 2014 at 10:44 PM. |
January 30, 2014, 11:25 PM | #3 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Go easy on the cleaning. Use 4-0 steel wool and oil or brass wool and oil to clean the metal, and a wood cleaner on the stock. No sandpaper or wire brush, please. The gun shown by Dreaming is a fairly high grade gun and if yours is similar it may be worth a bit of money even in poor condition.
Jim |
January 30, 2014, 11:39 PM | #4 |
Senior Member
Join Date: June 7, 2007
Location: Charlottesville, VA
Posts: 941
|
Thanks. The only cleaning I have done is to clean the surface rust off with oil and a rag, then some very fine steel wool and more oil to keep the rust from reforming. The wood was cleaned with mild (diluted) Pine-Sol then Old English furniture polish. No real shining or true polishing has been done yet. The gun itself has no value that I can see. My dad got it when his employer died. The gun was kept in a basement that flooded quite often. I am just trying to make it some what presentable and to keep the deterioration to a minimum.
|
January 31, 2014, 09:15 AM | #5 |
Senior Member
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
|
SxS shotguns were imported from Europe, literally, by the boat load. Ones such as yours turn up often and seldom have much intrinsic value. The names on them are usually the end seller not the builder. I would go ahead with the cleaning, hang on wall and enjoy.
|
January 31, 2014, 02:22 PM | #6 |
Senior Member
Join Date: January 4, 2012
Location: Northern Missouri
Posts: 480
|
All good thoughts here. I would add that while hammer doubles have never excited much collector interest, they are among the most interesting looking wall hangers, especially if you find one with pretty damascus barrels. Folks who don't know much about guns usually enjoy hearing about how they worked. If there is some family provenance, so much the better. Sometimes I think the site could have a category called "Grandpa Guns."
|
February 1, 2014, 12:36 PM | #7 |
Senior Member
Join Date: November 23, 2010
Posts: 4,862
|
How about a photos or two?
|
February 8, 2014, 01:26 PM | #8 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Quote:
|
|
February 8, 2014, 04:25 PM | #9 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
.
FWIW, I don't hold high hopes for it's "condition"/value, given it's been wiped with steel wool (even in oil). . |
February 8, 2014, 04:30 PM | #10 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Quote:
|
|
February 17, 2014, 09:44 PM | #11 |
Senior Member
Join Date: June 7, 2007
Location: Charlottesville, VA
Posts: 941
|
Thanks for all the information. As to its condition my dad inherited it from his boss and it had been left in a damp basement that flooded a few times. The barrels are horrendous. The left side hammer will not stay at full cock. Both nipples are rusted to near oblivion. There seems to be an obstruction in the right barrel. The ramrod won't go all the way back when inserted properly but when inverted it goes all the way in. All it is good for is a wall hanger.
As for photos right now I don't have any way to post photos yet. |
|
|