The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: General

Reply
 
Thread Tools Search this Thread
Old December 16, 2011, 11:48 AM   #1
2GunCorcoran
Member
 
Join Date: December 9, 2011
Posts: 41
Sighting in a new rifle

I have a new scoped rifle I need to sight in. Any advice?
__________________
"It's a hell of thing--killing a man: You take away all he's got and all he's ever going to have."
2GunCorcoran is offline  
Old December 16, 2011, 11:49 AM   #2
the rifleer
Senior Member
 
Join Date: March 5, 2008
Location: Sunny California
Posts: 1,281
I suggest shooting a shot from a steady position at a safe target and adjust the scope as needed.
__________________
There is no such thing as a stupid question, only stupid people.
the rifleer is offline  
Old December 16, 2011, 12:06 PM   #3
BigMikey76
Senior Member
 
Join Date: December 3, 2011
Location: Bellevue, NE
Posts: 981
There is some good advice in this thread about the same topic

http://thefiringline.com/forums/showthread.php?t=471810
__________________
Some people are like Slinkies - not really good for anything, but you still can't help but smile when you see one tumble down the stairs.
BigMikey76 is offline  
Old December 16, 2011, 12:06 PM   #4
wogpotter
Senior Member
 
Join Date: September 27, 2004
Posts: 4,811
Bench the rifle on bags both front & back. Fire 2 fouling rounds, unless you want a first round cold bore zero.
Bore sight if your rifle allows this.
Fire 3 rounds slowly & carefully before making any scope adjustments. Adjust scope to center of 3-shot group.
Tap scope after adjustments to settle the inner tube.
Repeat as needed.
Once you have a dead-on zero off the bags make a note of the turret's settings.
Now shoot the same group as you'd normally fire (prone, sitting whatever) & adjust as needed.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”?

Elderly Hunter: “That's dashed unsporting. Probably Belgium.”
wogpotter is offline  
Old December 16, 2011, 12:13 PM   #5
Major Dave (retired)
Senior Member
 
Join Date: March 12, 2008
Location: Between Dallas and Shreveport, LA
Posts: 569
Start at 25 yards

Fire 3 rounds, from a steady rest.

Adjust the scope, remembering that a one inch "miss" at 25 yards is the equivalent of a 4 inch miss at 100 yards. In other words, to move the point of impact (POI) one inch on a 25 yard target will require 16 clicks, if your scope adjustments are calibrated for 1/4 inch per click at 100 yards.

After firing 3 rounds, initially, determine the center of the group, then adjust to bring that center in line with the center of your target. If your 3 round "group" is overly large (greater than 2 inches at 25 yards), start over and shoot a new 3 round group.

Use a small aiming point. I put a 1/4 inch diameter blaze orange "sticker" in the middle of whatever target I am using. Typically a target may have a one inch, or even larger center ring. "Aim small, miss small" is the axiom.

If your POI is off in both elevation and windage, work with only windage until you get it centered, then work on elevation with additional 3 round groups. Trying to do both at the same time only complicates things, especially with newbies.

Hope this helps you at least get started with the process. There can be a lot more to it, but it may also be just this simple.

When you have both the windage and elevation "spot on" at 25 yards, put up a target at 100 yards and start the process over.

Remember to "aim small", use only 3 round groups of 2 inches or less size, and adjust only one aspect (either windage or elevation) at a time.

Good luck.
__________________
Artillery lends dignity to what would otherwise be but a vulgar brawl.
Major Dave (retired) is offline  
Old December 16, 2011, 12:44 PM   #6
Art Eatman
Staff in Memoriam
 
Join Date: November 13, 1998
Location: Terlingua, TX; Thomasville, GA
Posts: 24,798
A fair number of tips:

http://thefiringline.com/forums/showthread.php?t=471810
Art Eatman is offline  
Old December 16, 2011, 01:13 PM   #7
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
Read the links posted. Good start. I say start, but I believe to get a more accurate conclussion to getting a zero based on how you shoot.

Go ahead and walk your way to the center of the target at the distance you want your zero. But don't stop there.

Lets say you want to target or plink, requiring several rounds at a session. Once you get what you think is your zero set up a target and fire 20 or so rounds. Take your target and draw lines dividing it into 4 quarters. 12 to 6 o'clock, and 3 to 9 o'clock. Count your shots to determine how many shots are in each quarter. Adjust and shoot again. Keep doing this until you get an equal number of shots in each target.

This method will give you a true zero, weeding out the errors you get with 3 or 5 shot groups, hot or cold, fouled or clean barrels.

Now lets assume you are talking about hunting rifles, where the first, cold bore, shot is critical. Get your three shot groups centered as mentioned.

Then take one target, go out ever day for a week or so, (the more shots the more accurate your zero). Fire one shot a day. Regardless of weather or conditions. Take your target down so you can protect it for the next days shooting. Use the same target every day. Be sure you use a level to get your target set up the same. It don't matter if you clean your rifle or not. If you start your hunt with a clean bore, then make each days shot with a clean bore. If you use fouling shots then dont clean the gun.

After a week or so, (again the more shots the more accurate the zero) take your target down divide it into quareters and adjust until you get an equal number of shots per quarter.

With these metods, it doesn't matter how good you shoot, you can still get an accurate zero. One inch group or three inch group, if you center the group, its zeroed.

And when you zero, (after getting the three shots as close to the center as possible) zero from the position you are going to shoot. If you shoot competition such as high power, zero in high power positions. If you are zeroing your rifle for hunting, use your normal hunting position to zero your rifle.

Like any other task you take up, the more effert you put in your zero the more accurate your zero will be.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School
Distinguished Rifle Badge 1071
kraigwy is offline  
Reply

Tags
hunting , rifle , scope , sighting in

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05848 seconds with 8 queries