|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
June 30, 2013, 03:31 AM | #1 |
Senior Member
Join Date: June 16, 2009
Posts: 420
|
Would a ruger 77/44 be able to take hotter loads?
As the title suggests i'm wondering if given that it's a bolt action the ruger 77/44 could take hotter loads than say my 1894 in 44 magnum?
__________________
Never argue with morons, they will lower you down to their level and beat you with experience. |
June 30, 2013, 04:09 AM | #2 |
Senior Member
Join Date: April 11, 2011
Posts: 303
|
I think the 77/44 can take the hottest loads. the bolt action should be stronger then any lever action or revolver.
|
June 30, 2013, 08:30 AM | #3 |
Senior Member
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,602
|
Stupid is as Stupi does
Are we talking about exceeding published reloading data ? As that is never a good idea . There are many other factors that come into play , besides the strength of the firearm , when you exceed the parameters of any cartridge . I describe people that do this with one word , "STUPID" ! Your 77/44 will digest any factory load available for the .44 Mag. and any safely crafted handloads also !
__________________
Don't forget to have your liberals spayed or neutered ! Last edited by oneoldsap; July 2, 2013 at 07:07 PM. |
June 30, 2013, 10:06 AM | #4 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
I think the OP was asking the strength of the 77 vs. the 1894 not trying to turn it into a 458 win.
Yes the 77 is a stronger gun and you can build loads that surpass factory in weight and velocity and very much so in accuracy. The one I like loading for it is a very heavy 320 GR lead that is a deer’s worse nightmare inside of 75 yards. Another is a light 180 GR lead bullet that I have running to 1500 FPS and will hold a 3 inch group at 100 yards. That's the one thing that makes the gun so interesting for me. Pistol caliber rifles will never meet the energy or accuracy of a high power rifle but they will come close. They are also easier to load for and are a lot more forgiving. So go ahead and push the 77 to the documented max (in slow steps) but with a lot of experience with one (more than 2 years) the gun does not like maxed out loads. For best accuracy mine has been 80 to 85% of max pulls the best accuracy and that includes 7 different lead bullets, >5 Jacketed and one plated. By the way, you’re not stupid asking this question.
__________________
It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe. |
June 30, 2013, 04:57 PM | #5 |
Senior Member
Join Date: June 16, 2009
Posts: 420
|
Thanks Ozzieman that's exactly what i was talking about.
I have also found with every cartridge I've loaded for that about 80% of max load is the sweet spot. I've been reloading for 5 years and i'm a responsible and safe re loader I would never exceed published maximum loads..
__________________
Never argue with morons, they will lower you down to their level and beat you with experience. |
July 1, 2013, 01:45 PM | #6 | ||
Junior member
Join Date: February 23, 2012
Posts: 921
|
Quote:
Quote:
The Marlin 1894 is a stronger gun than a Ruger single action. The modern 1892 is stronger still. This much is proven. How anyone thinks a boltgun designed around the .22LR and .22Mag is stronger is beyond me. I'm not saying it is or isn't, I would just like to know what information these statements are based upon. |
||
July 1, 2013, 02:22 PM | #7 |
Senior Member
Join Date: May 31, 2013
Location: East Texas
Posts: 1,705
|
I guess I have just never seen all the evidence of the strength of the Marlins or 92's, but I would consider the bolt actions as very strong. For one thing, the bolt gun can and should be set up with a tighter headspace than the lever actions. The levers require a looser headspace to operate efficiently as they lack the camming action of a bolt. A lever such as the Browning BLR can tolerate higher pressures than the other models without the rotating bolts.
An action should not be subjected to ammo that is higher pressure than SAMMI specs anyway as it is not safe...period... so the whole discussion is sort of a non issue in my opinion. |
July 1, 2013, 04:23 PM | #8 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,795
|
Is the 77/44 built on a standard 77 receiver? I don't think it is. If it is actually on the same receiver as the 77/22, then I'd be wary of hot loads even from a bolt action.
|
July 1, 2013, 04:44 PM | #9 | |
Junior member
Join Date: February 23, 2012
Posts: 921
|
Quote:
|
|
July 1, 2013, 06:06 PM | #10 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
I'd like to know exactly what these statements are based on.
Experience with both and having the lever action become loose within 2000 rounds. And the Ruger having larger locking lugs and 3 of them. And if you read my input instead of jumping to conclusions you would have seen that I said that it will take So go ahead and push the 77 to the documented max (in slow steps) So if you think that this is dangerous then I would like to know what your statements are based on.
__________________
It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe. |
July 1, 2013, 06:30 PM | #11 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
Let’s look at some bolts.
The one on the left is smaller than the middle one but the one on the far right has larger lugs but the bolt lug is larger on the middle one. So my guess is that none of the 3 is strong enough to take heavy loads within book numbers of any type. Funny that the smallest one is an Ishapore 308 which is bassed on the SMLE Mk3, the one on the right is an 03A3 and the weak one in the middle is a gun based on the 22. Guess I’m wrong and I apologize.
__________________
It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe. Last edited by Ozzieman; July 1, 2013 at 07:54 PM. |
July 1, 2013, 06:38 PM | #12 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
Sorry I should have added the bolt face
__________________
It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe. |
July 1, 2013, 08:09 PM | #13 |
Junior member
Join Date: February 23, 2012
Posts: 921
|
If a Marlin 1894 shook itself loose in 2000rds there was something wrong with it.
As I suspected, you're making assumptions and apparently uneducated guesses. Fact is, we do not know how strong the Ruger 77/44 is and can make no assumptions. We KNOW that the Marlin is good to 40,000psi and the modern 1892 is good to 50,000psi when chambered in .45Colt. We do NOT know how strong the Ruger is. I've spoken at great length with Mic McPherson, who converts these guns to .475Linebaugh, .50AE and .440CorBon and has probably forgotten more about leverguns than most here will ever know. That is the source of my information. Not guesswork. I didn't jump to any conclusions, I'm responding to the words on the screen. Any of the mentioned guns are plenty strong enough for the chambering in question. |
July 2, 2013, 10:20 AM | #14 |
Senior Member
Join Date: April 11, 2011
Posts: 303
|
@newfrontier45:
A bolt action is stronger then a lever action that my friend is fact. But it says a lot about your firearm knowledge that someone has to tell you this.... |
July 2, 2013, 10:49 AM | #15 | |
Junior member
Join Date: February 23, 2012
Posts: 921
|
Quote:
I deal in facts, not speculation and uneducated guesswork. The fact is, we do not have any idea just how strong the 77/44 is. Period. I'm not saying it is or isn't stronger than the guns in question, I'm saying it is an unknown. You are certainly free to assume whatever you want but if you state your unsubstantiated opinion as fact, you will be called on it. Bolts don't contain pressure. Chambers contain pressure. The action/bolt needs to be only strong enough to withstand the backthrust. |
|
July 3, 2013, 04:12 AM | #16 |
Senior Member
Join Date: June 16, 2009
Posts: 420
|
Well this really got out of hand....
__________________
Never argue with morons, they will lower you down to their level and beat you with experience. |
July 3, 2013, 07:34 AM | #17 |
Senior Member
Join Date: November 20, 2007
Location: South Western OK
Posts: 3,112
|
Unlike the Ruger model 77 rifle, the Ruger model 77/44 action locks in the rear of the receiver like its .22 caliber roots.
The Winchester model 43 rifle is also a rear locking action with .22 long rifle roots. i've had numerous Winchester model 43 guns. IME: Those chambered for .25-20 and .32-20 never develop headspace problems. Winchester model 43 guns in calibers .22 Hornet and .218 Bee often have headspace issues. How will the Ruger model 77/44 action hold up under heavy .44 magnum loads? Time will tell. http://stevespages.com/ipb-ruger-7744.html |
July 3, 2013, 06:37 PM | #18 |
Senior Member
Join Date: May 27, 2007
Posts: 5,261
|
If it is a rear locking mechanism than I would say it is in the same class as a Marlin M1894.
There are more considerations, barrel thickness at the chamber. The barrel carries far more load, due to surface area of the case, than the bolt lugs. Also how well the case head is supported. More case head support the "stronger" the action as brass is the weakest link in the system. You can experiment and compare. At some point either action is going to experience sticky extraction and the most flexible action is going to be the "weakest".
__________________
If I'm not shooting, I'm reloading. |
July 4, 2013, 09:29 AM | #19 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
I want to apologize to every one for helping this get out of hand. I have come to the conclusion that I am wrong about the 7744 and its strength (since I have no proof) of being able to shoot standard book levels of 44 magnum or the quality of Ruger rifles.
So I am going to retire it to the safe since I have learnt that it’s not. And go back to my Marlin which I didn’t say was shot loose but the lock is loose. So can we please get back to the question that the OP asked and quit trying outdo undo each other? Newfrontier45, I had no idea it was based on the 22 which I just looked up and found you were right. I just thought that it was another well designed Ruger that would take anything that was considered a safe load.
__________________
It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe. |
July 4, 2013, 09:38 AM | #20 | ||||
Junior member
Join Date: February 23, 2012
Posts: 921
|
Quote:
The point of contention is the statement that it is unequivocally stronger than any levergun. When in fact, we have absolutely no idea just how strong they are. Quote:
Quote:
Quote:
|
||||
July 5, 2013, 07:37 PM | #21 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
Since you guys know so much more than I do and I mean that respectfully. I was wondering if you could explain to me in simple terms so that I can understand why the Marlin is so much stronger than the Ruger 4477.
I took some measurement today and I’m sure I’m missing something and hope you can help me understand better. Thank you. Receiver width where it meets the barrel Ruger 1.225 Marlin 1.050 Barrel where it meets the receiver Ruger 1.050 Marlin 0.925 Recessed bolt face Ruger 360 deg other than extractor Marlin only bottom 1/3 Bolt lock Ruger Total 3, 2 half way down the bolt that locks into the receiver and the bolt handle that locks into the receiver at the rear. Marlin Total 1. A small flat bar that slides upward that holds the bolt forward. It mates to an opening toward the rear of the bolt that’s the width of the bolt with a hollow center to clear the firing pin so that only 1/3 of the width of the bolt is being held forward. I think that’s it. My Marlin has a gap at the bolt face to the outside of the receiver of .003 inches measured with a feeler gage that I am able to close pushing the bolt forward. Is this excessive? It’s an old gun (mid 60’s) but it shoots well. unequivocally stronger than any levergun sir I never said that
__________________
It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe. Last edited by Ozzieman; July 5, 2013 at 07:51 PM. |
July 6, 2013, 07:51 AM | #22 | ||
Senior Member
Join Date: November 20, 2007
Location: South Western OK
Posts: 3,112
|
Quote:
Quote:
|
||
July 6, 2013, 08:36 AM | #23 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,795
|
I don't think the Marlin is stronger. Ruger tends to overbuild everything. If the 77/44 wasn't up to a steady diet of factory loads Ruger wouldn't put it on the market.
When this thread started I honestly didn't know the answer. Never really paid any attention to the Ruger bolt rifles in 44 or 357. Most bolt rifle actions do tend to be stronger, and if this rifle were built on the standard 77 action it would probably stand up to some pretty hot loads. But it is not. I'd not have any issues using any load in the Ruger that I would use in my Marlin. Stick with factory loads, or in spec reloads and I don't think you'd have any trouble with either rifle. |
July 6, 2013, 09:11 AM | #24 |
Senior Member
Join Date: March 11, 2006
Location: Oklahoma
Posts: 139
|
Blanket statements about the strength of actions is just foolishness as is looking only at the size of the bolts and locking lugs of bolt actions. What difference does it make if the locking lugs and bolt are super strong if the receiver that they lock into is weak. The Ruger is a rear locking lug action so we must ask how strong is the receiver in front of the bolt lugs, we must ask how ridgid is that action, and does it have any shapes or edges that make it prone to stress risers? In a front locking lug action, the lugs engage the generally immensely strong receiver ring that the barrel threads into and the strength of the action behind that point is rather inconscequential.
The fact that the O.P. Is concerned about whether the 77/22 is stronger than a Marlin levergun tells me that he is considering pushing the envelope on 44 magnum power levels. After all, a Marlin is strong enough for any factory or saami approved handloads. As several others here have already stated, the Rugers strength at this point is still an unknown. I am quite sure it is strong enough for any factory or saami approved load, but would be hesitant to shoot hotrodded loads in it or the Marlin. |
July 6, 2013, 09:21 AM | #25 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
Ok please bare with me for a second. I’m still learning here.
The Marlin 1894 is a stronger gun than a Ruger single action. Lyman Cast bullet handbook Marlin 45-70 1895 350 GR with N130 max load is 51 GR for 27,500 cup and 2009 FPS Ruger #1 and #3 only, same bullet max is 54 GR for 39,000 and 2145 FPS
__________________
It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe. |
Thread Tools | Search this Thread |
|
|