July 25, 2010, 12:10 PM | #1 |
Senior Member
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,592
|
Why the wads?
I am loading some .45 Colt rounds with FFFg and I have placed the felt wads between the powder and the bullet.
What is the purpose of the felt wads? Are they absolutely required? (I am using Muzzleloader Originals.) I remember using them when I was a kid and watching the old man load his cap and ball revolvers, but never fully understood why they were needed. Thanks guys.
__________________
Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen. |
July 25, 2010, 12:35 PM | #2 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
I don't use wads with cartridges. Wads with cap and ball help prevent chain fires. They do help keep the bore cleaner but I never saw the need for them with my 44-40's.
|
July 25, 2010, 12:54 PM | #3 |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
Nope....some people do....some people don't. It's one of many ways to get some lube in there for your BP residue. I load 45 Colt with and without lubed felt wads. I also used Walter Wads and I also put my own lube in the bullet grooves.
|
July 25, 2010, 08:12 PM | #4 |
Senior Member
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,592
|
So I guess the biggest thing to make sure of is there is no space between the powder and the bullet.
Wads are nice, but not necessary.
__________________
Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen. |
July 25, 2010, 08:27 PM | #5 |
Senior Member
Join Date: April 25, 2008
Posts: 891
|
I use heavily lubed felt wads to keep the fouling soft.
But, I can shoot several cylinders with no wads and the gun shoots fine. |
July 26, 2010, 10:12 AM | #6 |
Senior Member
Join Date: July 19, 2010
Posts: 180
|
Helps to prevent chain fire.
Fills the space between ball and powder. Depending on the thickness of the wad, and how much powder, can aid in placing the ball closer to the mouth of the chamber ( although this is also accomplished with filler materials of various types ). |
July 26, 2010, 10:22 AM | #7 |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
Hey fellas....the OP is specifically asking about using felt wads (I assume lubricated) between the power and bullet (not ball) in a 45 Colt BP cartridge. I think he wants to know if he should be using a felt wad in a cartridge. The answer for cartridges and the answer for cap-n-ball could be a little different.
|
July 26, 2010, 11:12 AM | #8 |
Senior Member
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,909
|
I've used them if there would be space between the bullet and the powder in the case. Otherwise, no.
Tangential to the topic, I also use thick wads in brass shotshells to fill up the stack - I can't stand to see the overshot card way down in the shell. Just an idiosyncrasy, I guess.
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae |
July 26, 2010, 11:23 AM | #9 |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
I always use them in C&Bs. I tried them in .45 colt back when I started shooting CAS. I could see no difference between using them or not using them in a CAS application. Accuracy didn't seem to be any different, and they didn't keep the pistols or rifle any cleaner IMNSHO. They might make a difference in a precision shooting though.
FM
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce |
July 27, 2010, 10:55 AM | #10 |
Senior Member
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,592
|
Again, Thank you guys.
I have some nephews comming at the end of August who have never seen a black powder round being fired, so I figured this would be a good chance for them to see, feel and smell what the old rounds were like. Now I am even considering a set of cap and ball pistols....
__________________
Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen. |
July 27, 2010, 03:51 PM | #11 | |
Senior Member
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,909
|
Quote:
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae |
|
July 27, 2010, 06:41 PM | #12 | |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
Quote:
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce |
|
July 27, 2010, 06:57 PM | #13 |
Senior Member
Join Date: February 24, 2009
Posts: 727
|
If your bullets have grooves for lube, there is really no reason to use a wad unless you want a slightly reduced power load.
|
July 27, 2010, 07:37 PM | #14 |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
Unless you are using BigLube bullets the grooves are rather small and don't hold much lube for BP shootin'.
|
July 27, 2010, 07:40 PM | #15 |
Junior member
Join Date: May 25, 2010
Location: Canada
Posts: 122
|
im no expert here but if your talking cap and ball pistol. isnt there some kinda goop that you put in the cylinder holes, like you scoop it out and fill it in there to prevent the chain fire.
|
July 27, 2010, 08:29 PM | #16 | |
Senior Member
Join Date: February 24, 2009
Posts: 727
|
Quote:
The standard RNFP 454190 was made for BP, and Keith's old 454424 has a huge groove. No problems here so far. Besides, only the lube in the thin edges of the wad does any good. All the rest of the lube in the wad is a'wasted. |
|
July 27, 2010, 08:38 PM | #17 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
I cast RNFP's out of a Lee mold and have no lube problems.
|
July 28, 2010, 08:23 AM | #18 |
Senior Member
Join Date: July 19, 2010
Posts: 180
|
GunGuy34-
I suspect the "goop" you're talking about is Bore Butter. But there's a lot of people who use Crisco. It's placed on the mouth of the chambers after the ball has been pushed down into place, and used as a sealant against chain fire. It will also serve as a lubricant to reduce fouling ( it's says it's supposed to, anyway.....) |
July 28, 2010, 08:50 AM | #19 |
Senior Member
Join Date: February 25, 2009
Posts: 643
|
A consideration is: The wads will often stick to the base of the bullet as it travels down range. No big deal with pistol rounds at short ranges but can be a killer of rifle accuracy.
|
July 29, 2010, 02:17 PM | #20 |
Junior member
Join Date: October 4, 2004
Posts: 458
|
I use smokeless in my 45 Colt rounds but I've always been told on muzzle loaders and cap and ball pistols to seat the ball so there in no air space- a big no no. I never thought about black powder cartridges- does having an air space in a black powder cartridge create a hazard? Thanks.
|
July 29, 2010, 04:37 PM | #21 | |
Senior Member
Join Date: February 24, 2009
Posts: 727
|
Quote:
|
|
July 30, 2010, 02:00 PM | #22 |
Junior member
Join Date: October 4, 2004
Posts: 458
|
Goes to show how dangerous it is to get "comfortable", such as reloading with smokeless powder and then thinking about using black , never assume anything. Thanks.
|
August 2, 2010, 12:44 AM | #23 |
Senior Member
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,592
|
Update
Well I loaded some of my .45 Colt rounds with felt wads and some without. I noticed no real difference in performance.
I enjoy cleaning the pistols and did not notice a lot of gunk or lead build up. The biggest concern I really had was about leaving too much space between the black powder and the bullet. I understand that this is a no-no! I will use the felt wads to take up space on the rounds I make in which the bullet does not reach and compress the powder when I seat it. Thank you to everyone who helped me with this.
__________________
Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen. |
|
|