|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
December 7, 2009, 07:29 PM | #1 |
Senior Member
Join Date: November 15, 2007
Location: Cayce, SC
Posts: 222
|
Stoeger 2000 auto parts schematic
Does anyone know where I can find a parts schematic for a Stoeger 2000? A friend is trying to put one back together and believes some parts are missing.
|
December 7, 2009, 11:26 PM | #2 |
Senior Member
Join Date: February 21, 2006
Location: DFW Metromess
Posts: 562
|
Unless he has driven pins out of the receiver and removed the screw from the side of the receiver, there really isn't much.
http://world.guns.ru/shotgun/sh34-e.htm Go to this link, and you will find a picture of a disassembled one. The trigger group is still in, but this is not difficult to remove. The Inertia system makes it largely unnecessary to break it down any further, due to the fact that little powder residue gets into the action. I have found little on the web, and do not see any downloadable manuals on Stoeger's website. I have my manual somewhere...I will try to find it and see if there is an exploded drawing.
__________________
“Life is either a daring adventure or nothing." --Helen Keller "Do not cry havoc when you should but hunt with modest warrant." --William Shakespeare Glock Certified Armorer NRA Life Member |
December 8, 2009, 11:39 AM | #3 |
Member
Join Date: January 30, 2009
Location: VA
Posts: 20
|
I scanned the exploded diagrams from my manual. See the attached files.
|
December 8, 2009, 11:40 AM | #4 |
Member
Join Date: January 30, 2009
Location: VA
Posts: 20
|
One more.
|
December 10, 2009, 05:53 PM | #5 |
Senior Member
Join Date: November 15, 2007
Location: Cayce, SC
Posts: 222
|
Thanks guys, I will print these out for my buddy.
|
December 31, 2011, 09:25 PM | #6 |
Senior Member
Join Date: October 6, 2009
Posts: 332
|
I have this gun and am also in need of a few parts. I see the parts i need in the first schematic image that was posted but the part numbers and description are not listed. I need the small screw that screws in the reciever thats located on the left side and also the piece that it holds that is on the inside of the reciever. I think it may have the job of keeping the bolt in the open position maybe?
Also it needs the bolt handle. I assume it also needs the bolt handle pin and spring as well. Does anybody have the part numbers and description of the first parts i mentioned? (screw and piece it screws to inside the reciever) |
January 3, 2012, 04:22 PM | #7 |
Junior Member
Join Date: January 3, 2012
Posts: 1
|
Stoeger m2000 stigger guard
Does anybody know where i can get a trigger guard for a Stoeger m2000. duck season is almost over and id like to have one soon.
Thanks, Tucker |
Thread Tools | Search this Thread |
|
|