|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
June 7, 2012, 09:33 PM | #1 |
Junior Member
Join Date: June 7, 2012
Location: Wilds of Alaska
Posts: 2
|
firing pin replacement 10/22 bolt
Any tips or trick on replacing the oem with Kidd firing pin on my Ruger 10/22 would be appreciated.
|
June 7, 2012, 09:50 PM | #2 |
Member
Join Date: August 3, 2011
Location: Eastern Orygun
Posts: 91
|
YouTube is your friend. Many videos on the subject of firing pin replacement on 10-22s.
|
June 8, 2012, 08:53 PM | #3 |
Senior Member
Join Date: December 27, 2010
Location: In the hills near Ozark, AR
Posts: 151
|
Might as well upgrade your ejector while you're at it.
|
June 8, 2012, 09:25 PM | #4 |
Senior Member
Join Date: January 12, 2007
Location: North Carolina
Posts: 4,728
|
|
June 8, 2012, 09:55 PM | #5 |
Senior Member
Join Date: December 27, 2010
Location: In the hills near Ozark, AR
Posts: 151
|
You're right. Long day and brain is not fully functional. It's the first piece you'll remove from the bolt to get to the firing pin.
Check over at rimfirecentral.com and I'm sure someone has done a writeup on it. |
June 8, 2012, 09:58 PM | #6 |
Senior Member
Join Date: December 27, 2010
Location: In the hills near Ozark, AR
Posts: 151
|
Yes, the Power Custom extractor is very good. I have it in several of my 10-22's.
|
June 9, 2012, 08:18 AM | #7 |
Senior Member
Join Date: January 12, 2007
Location: North Carolina
Posts: 4,728
|
Its the first thing I do with any Ruger .22 I buy usually.
Sent from my DROID X2 using Tapatalk 2 |
Thread Tools | Search this Thread |
|
|