S&W 45

mhblaw · March 15, 2013, 03:15 PM

What would a N-frame, 6" pinned barrel, chambered for 45 ACP be worth? Good shape, slight wear at muzzle from holster. No moon clips. Assume could shoot 45 Auto Rim as well.

Winchester_73 · March 15, 2013, 04:21 PM

Too many S&Ws fit that description, so we need a SN to ID it, and several pics to judge condition.

RickB · March 15, 2013, 04:21 PM

I thought the pinned 25s were 6.5"?

Winchester_73 · March 15, 2013, 04:26 PM

Well he didn't say it was a 25 and the 6.5 barrel went away in the late 1970s, so the 6.5 barrel would generally mean an earlier gun. This is assuming that the barrel was even measured correctly, from the cylinder face to muzzle.

mtrvl · March 16, 2013, 02:34 PM

F.Y.I. I have a S&W model 25-5 and it has a 4 inch pinned barrel, nickel plated.

RickB · March 16, 2013, 06:51 PM

Quote:

Well he didn't say it was a 25

If it's a 6" .45 ACP, what else would it be?

BigD_in_FL · March 16, 2013, 08:58 PM

^^^ IIRC, the model of 1917 was 6"barrel

Jim Watson · March 16, 2013, 09:08 PM

1917 has 5.5" barrel.

He might be really lucky and have a 1950/M26, but then they are 6.5s.

People are generally frightened they are not getting a DEAL.
If you have to pay a little extra to get what you really want, it won't amount to much spread out over the rest of your life... and your grandson's.

March 15, 2013, 03:15 PM	#1
mhblaw Senior Member Join Date: April 16, 2009 Location: North Dakota Posts: 111	S&W 45 What would a N-frame, 6" pinned barrel, chambered for 45 ACP be worth? Good shape, slight wear at muzzle from holster. No moon clips. Assume could shoot 45 Auto Rim as well.

March 15, 2013, 04:21 PM	#2
Winchester_73 Senior Member Join Date: December 20, 2008 Location: Pittsburgh PA Posts: 2,863	Too many S&Ws fit that description, so we need a SN to ID it, and several pics to judge condition. __________________ Winchester 73, the TFL user that won the west

March 15, 2013, 04:26 PM	#4
Winchester_73 Senior Member Join Date: December 20, 2008 Location: Pittsburgh PA Posts: 2,863	Well he didn't say it was a 25 and the 6.5 barrel went away in the late 1970s, so the 6.5 barrel would generally mean an earlier gun. This is assuming that the barrel was even measured correctly, from the cylinder face to muzzle. __________________ Winchester 73, the TFL user that won the west

March 16, 2013, 02:34 PM	#5
mtrvl Member Join Date: February 10, 2013 Posts: 22	F.Y.I. I have a S&W model 25-5 and it has a 4 inch pinned barrel, nickel plated. Last edited by mtrvl; April 21, 2013 at 10:41 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

March 15, 2013, 04:21 PM	#3
RickB Senior Member Join Date: March 1, 2000 Location: Boise, ID Posts: 8,518	I thought the pinned 25s were 6.5"?

March 16, 2013, 08:58 PM	#7
BigD_in_FL Junior member Join Date: December 20, 2012 Location: The "Gunshine State" Posts: 1,981	^^^ IIRC, the model of 1917 was 6"barrel

March 16, 2013, 09:08 PM	#8
Jim Watson Senior Member Join Date: October 25, 2001 Location: Alabama Posts: 18,535	1917 has 5.5" barrel. He might be really lucky and have a 1950/M26, but then they are 6.5s. People are generally frightened they are not getting a DEAL. If you have to pay a little extra to get what you really want, it won't amount to much spread out over the rest of your life... and your grandson's.