February 20, 2012, 05:18 PM | #1 |
Senior Member
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,592
|
Lead targets
I have about 20 pounds of lead, mostly pure. I was thinking of melting it in to a pan and making a rectangular target out of it.
I have tried steel plates, but the sound of the ricochet is unnerving to me and I don't care to shoot at them any longer. I was thinking the soft lead would allow the bullets to pass through, but you would also be able to see it move. (I am planning on putting a thick piece of steel wire in the mold and melting the lead around it.) Anyone ever tried this? Any reason not to do this? Thanks.
__________________
Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen. |
February 20, 2012, 05:33 PM | #2 |
Senior Member
Join Date: March 18, 2009
Posts: 637
|
I recon it will crater creating the potential for random ricochets.
Angle your steel down, predicable ricochets are safer.
__________________
Maintaining a constant state of cat-like readiness and a heightened state of suspicious alertness. |
February 20, 2012, 05:47 PM | #3 |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
There is always a better way !!
Uncle Buck;
Once heard that a good idea is only as good as the time it takes for someone to talk you out of it. That said and with all respect, I'd put that precious lead to better use. If you don't like the ringing of steel, then find something else. Not too long ago, I saw some orange poly "self-healing" target shape that looked pretty interesting but not cheap. ... JMHO and Be Safe!!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
February 20, 2012, 08:10 PM | #4 | |
Senior Member
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,592
|
Quote:
I'll try a different angle on the steel plates. I thought at a distance of 50 yards, the little bit of lead that flew off would not have the same velocity as a full fledged round that clanged of the steel. I have a good back stop, but I worry about things coming back towards me. I do not cast my own bullets and I gave up making lead sinkers a long time ago. Just found the lead the other day when messing around in the shop and was wondering what to do with it.
__________________
Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen. |
|
February 21, 2012, 09:17 PM | #5 |
Senior Member
Join Date: November 14, 1999
Posts: 1,573
|
Sell or trade the lead ... USPS flat rate boxes are a GREAT deal for shipping dense stuff like lead ... I'm sure that someone will have something you'd like for it in trade ... just a thought.
Saands |
February 24, 2012, 05:44 PM | #6 |
Senior Member
Join Date: February 21, 2012
Location: Wisconsin
Posts: 763
|
Turn the lead into bullets.
If you don't like the sound rounds striking steel you should invest in the new polymer targets that are "self healing." They'll be good for a few to several hundred rounds of fire (depending on ammo) before you have to get a new one.
__________________
This is who we are, what we do. |
February 24, 2012, 06:34 PM | #7 |
Senior Member
Join Date: January 27, 2010
Location: Norfolk, VA
Posts: 2,905
|
Just spitballing here, but would a few layers of Dynamat or similar sound-deadening matting on the back of a steel target help muffle the "ringing" to acceptable levels?
|
February 24, 2012, 07:17 PM | #8 |
Senior Member
Join Date: July 3, 2011
Location: S.E. Texas Gulf Coast
Posts: 743
|
I shoot into a old refrigerator that is layed down on concrete blocks where the door is facing up and I shoot at the top which is now vertical. It is filled with dirt and I know that nothing I shoot can go through 5 feet of earth! I have a thin piece of used plywood nailed to the "top" where I then tack my paper targets. The plywood allows the bullets to pass into the inside of the refrigerator and dirt but does not allow the dirt to spill back out. I replace the plywood as necessary.
|
|
|