|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 31, 2011, 06:45 PM | #1 |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
Remington Army and Navy Revolvers 1861 - 1888
As a result of a couple of threads on this and other forums about Remington Revolvers, spare cylinders, etc. I did a search for information or books about Remingtons and found very little out there about Remington Revolvers - and most of what is posted is at least partially erroneous. I did find subject book listed on Amazon and ordered it. It came in last week and I have been slowly reading it.
Subject book dated 2007 by Donald L. Ware is a study of the history of Remington revolvers. One of the more interesting facts that I've read so far is what the 'standard appendages' were that were part of the 4 contracts that Remington had with the US Government during the Civil War. Standard appendages per box of 50 pistols was: Fifty Screwdrivers & Cone wrenches Fifty extra cones Twenty five bullet molds casting 2 balls each The original 1st contract list included a six cavity gang mold; but it was deleted from the list by Gen Ripley early on. One thing noticeably absent from the list are spare cylinders. I'm only about a quarter way through the book; but it is giving me a new appreciation of CW ordnance and Remington revolvers. But, they still don't fit my hand as well as a Colt.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce Last edited by Fingers McGee; July 31, 2011 at 07:02 PM. |
August 1, 2011, 06:26 AM | #2 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Fingers - interesting. Thanks.
|
August 1, 2011, 09:52 AM | #3 |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
Anyone ever see the U.S. bullet molds or other appendages for sale?
It would be interesting to have a look see at any of those items. |
August 1, 2011, 10:24 AM | #4 | |
Senior Member
Join Date: August 28, 2007
Location: Hudson, Florida
Posts: 1,135
|
Quote:
__________________
"This is my Remy and this is my Colt. Remy loads easy and topstrap strong, Colt balances better and never feels wrong. A repro black powder revolver gun, they smoke and shoot lead and give me much fun. I can't figure out which one I like better, they're both fine revolvers that fit in my leather". "To be sure of hitting the target, shoot first and call whatever you hit the target". |
|
August 1, 2011, 10:49 AM | #5 | |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
Quote:
The book does say that at some point (second or third contract IIRC) the requirement for supplying molds was dropped because soldiers were throwing them away instead of carrying the dead weight. The molds weren't being used because use of prepackaged cartridges was the primary method of loading the revolvers. Another interesting point in the requests by the Navy for revolvers. They almost always included an order for 100 or more cartridges per revolver with a like or greater quantity of caps. The caps and cartridges to be packaged separately. At the end of the CW, the Army had purchased, either through agents or through the four separate contracts, nearly 135,000 Remington revolvers of all types (Beals, Elliot, New Models, Army's and Navy's) in 36 and 44 caliber. The Navy purchased 6,300+ Navy model revolvers. They also purchased some 27,000 rifles and muskets.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce Last edited by Fingers McGee; August 1, 2011 at 03:21 PM. Reason: updated quantities and corrected spelling |
|
August 1, 2011, 11:54 AM | #6 |
Senior Member
Join Date: November 18, 2010
Location: Orygun
Posts: 869
|
The Remington is a gun made to function whereas the Colt is more elegant and balanced. Like the difference between a nice handling 4WD pickup and a Land Rover. Both will get the job done (off road use) but the Land Rover is built more solidly to take more of a beating but drives like a tank. Maybe that's a bad analogy but it's all I could think of on the fly.
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball. SASS#3302 (Life), SASS Regulator, NRA (Life), Dirty Gamey Bastards #129 Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell) |
August 1, 2011, 03:36 PM | #7 | |
Senior Member
Join Date: May 10, 2006
Location: Weekend cowboy
Posts: 542
|
Quote:
Hmm, now that brings up a new observation: The items that come with each gun are like a starter kit sold with today's color inkjet photo printers. You get a set of ink cartridges included with the new machine, but they are only good for about 4 prints. You order supplies separately from the same company if you want continuous service. So extra cones and spare cylinders probably had to be ordered separately from Remington. |
|
August 3, 2011, 03:21 PM | #8 |
Senior Member
Join Date: January 5, 2009
Posts: 904
|
I've owned firearms all my life but am new to c&b revolvers. I own two such guns now, one of which is a Pietta replica of a standard 8" barrel .44 cal. 1858 Remington New Model Army. It's really a pretty amazing gun. It's simple. It's rugged, it's powerful, it has no wedges to worry about. It's the authentic article for Civil War reenactors; It can be reloaded relatively quickly. It can do double duty as a cowboy cartridge revolver if you buy a conversion cylinder; then you can swap back and forth between standard C&B and cowboy cartridge.
So what's not to like? Well actually there is one thing that I think Colt had Remington beat on - well two things, because Colt's look better too - but I think Colt has a superior hammer design, or at least it seems to me that the "ergonomics" of cocking my Colt 1851 Navy-type hammer is superior to the the "ergonomics" of cocking a 1858 Remington hammer. This may be what other people have meant when they've said that a Colt feels better in their hand than a Remington does. Personally, I don't think my 1851 Colt feels any better in my hand until I try to cock the Remington, and then I realize its more awkward for me than cocking my Colt 1851 replica is. It took a little shooting and eventually noticing the gun was coming further off target when I was cocking it than the Colt replica was to realize this. I wondered if it was just my particular hand that made it more awkward. Then I looked at the difference in the hammers and its obvious that the Colt hammer spur is longer, so maybe that's it. Anyway I also watched the thread in this forum called "Video-Shooting The Ultimate Remington" and on one of the shots you can clearly see just how awkward cocking it was for him and I realized that cocking a Remington is probably just a little awkward for everybody. Watch that video and watch duelist 54 cock the gun before every shot, and see what you think. PS. He's using a cartridge coversion cylinder and a short-barreled gun but it cocks the same as a standard c&b 1858 NMA. You need to watch right much of the video to see what I mean because the first time he fires the gun the camera is behind him and you can't tell much, and many times he's holding the muzzle upward when he cocks it and you can't tell much from that either, but it's very obvious how far off target the muzzle wanders when he's cocking it on one of the shots when this arm is extended forward in shooting position when the camera is almost in front of him and the muzzle wanders in the direction of the camera when he's cocking the gun. This is a very experienced shooter doing the firing, and the video just makes it obvious that cocking the Remington is a little awkward and not nearly as "intuitive" (I guess that's the word I'm searching for) as a 1851 Colt type revolver. Other than that, I think the Remington is the superior gun. Last edited by DG45; August 4, 2011 at 01:09 PM. |
August 3, 2011, 03:33 PM | #9 | |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
Quote:
Other than possibly installing a set of Treso or stainless steel cones on your revolvers, how many have you replaced? I've put hundreds of rounds - (bordering on thousands?) through some of my C&Bs and have yet to replace a cone.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce |
|
August 3, 2011, 06:13 PM | #10 |
Senior Member
Join Date: June 20, 2009
Posts: 1,102
|
The "feel"...
The Colt pistol grip is configured to sit the barrel low in the shooters hand and the angle follows the natural curve of a closed hand's grip whereas, the Remington grip is more vertical and the shooter must literally make his hand conform to the grip angle. It still feels good once the hand grips it and controls the revolver adequatelly but it is a foreign angle to the hand.
The frame of the Colt has the damnable situation where a spent cap or fragment can fall between the hammer and the frame upon re-cocking. The shape of the Remington frame is taller than the Colt and it puts the center of the cylinder about 1/4" higher above the hand. Due to this, the axis of the barrel is naturally a bit higher and the gun really "feels" different. Both are great guns but I tend to prefer the way the Remington dsign prvents the fragments from jamming the hammer against the frame. You still have chances for fragments to do harm though... Nothing is perfect. Just my take, ZVP |
August 3, 2011, 08:04 PM | #11 |
Junior member
Join Date: August 8, 2009
Posts: 374
|
That's a pretty accurate and fair description.
|
August 3, 2011, 08:50 PM | #12 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Let's see, don't the Remingtons have a tendency to bind up with fouling rather earlier in the session?
|
August 3, 2011, 10:45 PM | #13 | |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
Quote:
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce Last edited by Fingers McGee; August 4, 2011 at 10:45 AM. |
|
August 3, 2011, 11:38 PM | #14 |
Senior Member
Join Date: November 18, 2010
Location: Orygun
Posts: 869
|
I have two pairs of Euroarms Remingtons (36 & 44) that will shoot an entire match without fouling but my Ubertis need a drop of oil on the front of the cylinder/frame juncture between stages to keep turning well. 30 gr loads gum the Ubertis up faster than 20 gr loads but the 4 Euros aren't that bothered by fouling. I can't figure it out unless it is due to the tight gaps on the Ubertis.
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball. SASS#3302 (Life), SASS Regulator, NRA (Life), Dirty Gamey Bastards #129 Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell) |
August 4, 2011, 11:26 AM | #15 |
Senior Member
Join Date: February 25, 2009
Posts: 643
|
I am a dyed in the wool 1860 Army shooter, BUT, I ran across the Prince of Pistoleers side match in the shoot of the same name last June. I found myself wanting the better sighting system of the Remington for the precision shooting required.
In a slow fire, deliberate aiming situation, the Remington outshines the Colt. |
August 4, 2011, 08:28 PM | #16 |
Senior Member
Join Date: November 18, 2010
Location: Orygun
Posts: 869
|
The precision shooters of the North/South Shooters Association almost exclusively use Remingtons for their target shooting. Many have tricked out accurized Remingtons just like the CAS shooters use short stroke kits etc..
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball. SASS#3302 (Life), SASS Regulator, NRA (Life), Dirty Gamey Bastards #129 Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell) |
August 4, 2011, 09:46 PM | #17 |
Junior member
Join Date: August 8, 2009
Posts: 374
|
|
August 5, 2011, 10:59 AM | #18 |
Senior Member
Join Date: October 21, 2010
Location: Texas
Posts: 193
|
Interesting thread Fingers.....and others. Thanks for posting!
|
|
|