|
|
|||||||
| Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
| Register | FAQ | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Search this Thread |
September 3, 2014, 11:10 AM
|
#1 |
|
Senior Member
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
|
Lyman Super Moly spray lube for cast bullets...
is this enough to lube the bullets ??? no need for a tumble lube, or use a conventional lube pressed into the lube groove ???
thoughts ???
__________________
In life you either make dust or eat dust... |
|
|
September 3, 2014, 01:54 PM
|
#2 |
|
Senior Member
Join Date: July 26, 2011
Location: USA
Posts: 1,730
|
Lyman - FAQs ยป Tumblers
Q: Do I moly coat cast bullets before or after sizing and lubing?
A: Cast bullets should be sized without lubing, and then moly coated. The moly coated bullets can then be lubed normally. http://www.lymanproducts.com/lyman/f...mblers_faq.php Good luck sizing without lube. 
|
|
|
|
September 3, 2014, 02:00 PM
|
#3 |
|
Senior Member
Join Date: December 28, 2006
Posts: 4,342
|
According to this....no need to tumble lube. Pretty pricey tho.....
http://www.lymanproducts.com/lyman/t...moly-spray.php |
|
|
|
September 3, 2014, 02:21 PM
|
#4 |
|
Senior Member
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
|
thanks for the link...
initially my buddy that did the machine work on my 25 ACP Blackhawk thought I should moly treat the barrel... BTW... that is the Moly I just received... I haven't dealt much yet with lubricated cast bullets yet... but ???
__________________
In life you either make dust or eat dust... |
|
|
|
|
|
