January 9, 2013, 05:03 PM | #1 |
Junior Member
Join Date: January 9, 2013
Posts: 6
|
Just found this site!
After some reading, I thought I would introduce myself. I am just starting to get ready to start reloading. My wife bought me some stuff at a yard sale including: RCBS Special 5 press kit that includes a 505 scale, primer tray, case lube pad, a 22-45 cal funnel, a dial caliper case length gage, a case loading block, and some hammer looking thing that is clear green plastic. In the basket of stuff, there was also a die set for a .32 Win Special, a Lee Auto Prime, a 2 Vol set of Hornady 4th edition, a Speer Reloading manual, assorted bullets (no of which I will use), shot (for 12 gage), and a bag of 100 wads.
To go with the wads, there was a MEC 650N progressive reloader that neither the press nor the attachments look like they have been used. My wife just stumbles onto these things. She paid $100 for all of it so I would spend more time in my shop and save money at the same time. I also found a Lyman Reloading and cast bullet guide for getting started in reloading and casting. I know there are newer offerings of these books, but do I need to go to the expense, or will these get me going? I will be reloading: 45 ACP, 357 mag, 380 auto, 223/5.56 NATO, 300 Win Mag, and since I have the equipment, 12 gage. I will be doing some reading on here and in whatever books you suggest. I have already found that sometimes it will be cheaper to buy some bullets in a box and reload them versus buying new cases? THANKS! Mark |
January 9, 2013, 05:06 PM | #2 |
Senior Member
Join Date: March 4, 2012
Location: Iowa
Posts: 149
|
Welcome to the forum. Sounds like you've got a good start on things. You'll find a lot of useful information using our search feature and library as well as the forum conversations. Happy handloading!
__________________
Guns don't kill people, fathers with pretty daughters do. Two wrongs don't make a right, but three comes pretty close. Proud NRA member |
January 9, 2013, 06:58 PM | #3 |
Senior Member
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
|
Welcome to the forum.
Looks like your wife got a good deal. Hornady's currently printing their 9th edition while Speer is on their 14th. You may want to update with a couple of new manuals which would have some newer calibers, powers, tests, etc. Many folks recommend Lyman's 49th edition as a good manual. Some online information is available from powder makers, but I find this information can be limited.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part. |
January 9, 2013, 07:19 PM | #4 |
Junior member
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981
|
Shotgun reloading is different than metallic so make sure you have a manual for that as well.
|
January 9, 2013, 10:04 PM | #5 |
Junior Member
Join Date: January 9, 2013
Posts: 6
|
Amazon here I come! Thanks for the guidance!
Mark |
January 9, 2013, 10:30 PM | #6 |
Senior Member
Join Date: July 25, 2012
Posts: 755
|
Welcome. Yeah like others have said, sounds like you have a good start.. If you have any questions, please ask, and if you get a chance email,write or call your reps about gun legislation... Sorry don't mean to sound pushy but we all need to. Thanks and again, welcome Wiggy
__________________
" The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in Government...." - Thomas Jefferson |
January 10, 2013, 03:51 PM | #7 |
Senior Member
Join Date: February 5, 2012
Location: Southwest WA Coast
Posts: 558
|
The hammer looking thing is likely a bullet puller.
|
January 10, 2013, 04:07 PM | #8 |
Senior Member
Join Date: December 26, 2004
Location: Louisville KY
Posts: 13,805
|
That 'hammer looking thing' will be your best friend when you screw up and need to disassemble all those bad rounds you made. Trust me, I know.
Couple of suggestions. 1. Reloading is absurdly addictive. Don't be tempted to make 200 rounds before you even fire them. Make ten at a time, put them in a baggie with a brief description of the powder, charge weight and OAL. That way if/when they don't function right you'll only be out that ten. By all means try a few different loads, just don't go making hundreds until you see what works in YOUR gun. 2. Start with 45acp. Arguably the easiest round to reload for as no trimming is involved and placing that big fat bullet on the case couldn't be easier. Skip rifle and shotgun loads until you get someone to show you how. 3. Controversial, but consider using a Lee Factory Crimp Die. It'll make SURE all your rounds will fit the chamber. It can't compensate for bad OAL lengths, that is your responsibility. |
January 10, 2013, 09:16 PM | #9 |
Senior Member
Join Date: August 5, 2010
Location: Jackson County Florida
Posts: 207
|
If you don't have any experince reloading I would suggest reading the ABCs Of Reloading
Sent from my TB782B using Tapatalk 2 |
January 31, 2013, 12:37 PM | #10 |
Junior Member
Join Date: January 9, 2013
Posts: 6
|
Sorry so long. Migraines....
I finally found somebody local (small town) that has been reloading for decades. He is going to help me design a good, funtional, and moveable table. If you all have some pics of your workstations that you are willing to send me for ideas, please do. In exchange for homemade BBQ and homemade wine, he will come over and guide me until he feels comfortable with my progress. He also runs the reloading section of a local farm store. Good advice about keeping track of loads and how that load shoots. I am going to get a 5 section spiral notebook to get me started, then, I will do spreadsheets for each caliber. THANKS! Mark |
January 31, 2013, 04:50 PM | #11 |
Senior Member
Join Date: January 23, 2013
Location: Forgottonia, Il
Posts: 217
|
Looks like you found the right guy to get you started off.
Your wife deserves something nice for Valentines coming up because you got way, way, over $100 worth of gear in that deal. Last edited by rlc323; February 1, 2013 at 11:08 AM. |
January 31, 2013, 08:21 PM | #12 |
Junior Member
Join Date: January 9, 2013
Posts: 6
|
Yeah, she's a keeper!
Mark |
February 1, 2013, 10:37 PM | #13 |
Senior Member
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,341
|
Books are forever
The manuals you have are good forever. The early chapters of almost all manuals contain descriptions of and instruction on the loading process. This has not changed much at all in the past 90 to 100 years (since the popularity of smokeless powder supplanted black powder). So, read those chapters of the manuals you have first. Reading different writing styles will broaden your view and expose you to different areas of emphasis.
Having a mentor, you are miles ahead of most beginning reloaders. Lucky you. The load recipes in the older manuals should be checked against newer manuals, as the formulations of propellants (gunpowders) have evolved over the years and more modern measuring methods have suggested changes for reasons of safety. ALWAYS compare load recipes from different sources and pay attention to the test gun from which they were fired. Every ballistics lab is different. The 505 and the MEC are well worth the entire purchase price. Your wife is a good shopper. Congratulations and welcome. Lost Sheep |
February 2, 2013, 12:35 AM | #14 |
Senior Member
Join Date: January 25, 2009
Location: Liberty Twp, OH
Posts: 283
|
Benches, we dont need no stinking Benches -Pics of Benches
I would call some of these works of art!
http://thefiringline.com/forums/showthread.php?t=231150 |
February 2, 2013, 08:54 AM | #15 |
Member
Join Date: April 7, 2011
Posts: 35
|
While a manual is handy, I've found I rarely use one anymore. I usually just go the powder manufactures website and use that load data.
|
February 2, 2013, 01:07 PM | #16 |
Senior Member
Join Date: April 23, 2008
Location: Medina, Ohio
Posts: 273
|
Your wife got you a whole set up for $100 - great deal, and a great wife. Read a lot and ask questions here if needed. Having someone local to guide you is geat. Get busy and enjoy it....
__________________
God Bless America US Army, NRA Endowment TSRA Life, SASS |
Thread Tools | Search this Thread |
|
|