|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
December 3, 2000, 09:26 PM | #1 |
Senior Member
Join Date: November 18, 1999
Posts: 293
|
I have been loading the 124gr west coast plated bullet with 4.3gr of W231 to an OAL of 1.165 with pretty fair results. I just loaded some with the same load to an OAL of 1.123. My question is do you think this is a safe load and will the accuracy in general be better or worse. I shoot several 9mm handguns.
Thanks
__________________
Rod Black |
December 4, 2000, 07:19 AM | #2 |
Senior Member
Join Date: October 17, 1999
Location: Alabama
Posts: 455
|
I reload all my 9's to 1.135" regardless of bullet weight.
|
December 4, 2000, 05:58 PM | #3 |
Senior Member
Join Date: November 18, 1999
Posts: 293
|
Thanks Joe D for the reply
__________________
Rod Black |
December 4, 2000, 06:45 PM | #4 |
Senior Member
Join Date: November 26, 2000
Location: Northeastern Ct.
Posts: 1,019
|
The load you desribe is my std. 124 grain 9mm load. I use an OAL of 1.125 +/- .005. This load shoots well in my Berettas (FS & C), and Glock 19. A friend shoots the same load from his Ruger 95 with no problems. I have found this to be an accurate and clean load.
|
December 5, 2000, 05:36 PM | #5 |
Senior Member
Join Date: November 18, 1999
Posts: 293
|
Swamp Yankee,
Thanks for the response, glad to know that information, it makes me feel a lot better.
__________________
Rod Black |
Thread Tools | Search this Thread |
|
|