April 16, 2013, 11:18 PM | #1 |
Senior Member
Join Date: February 5, 2011
Posts: 282
|
Where to get brass
What's the best place right now for .45 acp brass? I need some more, and by best I mean cheapest once fired
.45ACP small pistol primer! Last edited by south.texas.dead.I; April 18, 2013 at 07:52 PM. |
April 17, 2013, 02:26 AM | #2 |
Senior Member
Join Date: January 16, 2013
Posts: 211
|
Re: Where to get brass
Shooting range
|
April 17, 2013, 06:51 AM | #3 |
Senior Member
Join Date: August 27, 2012
Posts: 321
|
gun auction sites.....
|
April 17, 2013, 10:23 AM | #4 |
Member
Join Date: October 4, 2011
Location: Central TX
Posts: 87
|
I've ordered some from here before, and never had any issues with the product, or with the owner.
http://www.leobrass.com/store/
__________________
Ammo by Dillon and Hornady |
April 17, 2013, 10:25 AM | #5 |
Member
Join Date: October 4, 2011
Location: Central TX
Posts: 87
|
Another place where I've ordered from and have had good luck:
http://www.once-fired-brass.com/prod...m?refresh=true
__________________
Ammo by Dillon and Hornady |
April 17, 2013, 11:19 AM | #6 |
Senior Member
Join Date: April 2, 2012
Posts: 114
|
You might want to post this in the WTB WTT WTS forum. I trade brass all the time. It only costs shipping.
I have some 45 ACP to trade if u have anything I need. PM me and let me know. |
April 17, 2013, 03:32 PM | #7 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
Sweep it up - off the floor of your local range....
.45 acp is one of the most durable cases out there..../ I can't tell you how many times I reload a case --- and the only reason I reject one is if it looks really nasty after I clean them....or mostly I just lose them, because they bounce all over on the concrete floors at my range.... ------- Now, if you were looking for something like 10mm....I'd be more careful about picking up range cases...in a high pressure case like that....but .45 acp is easy to find. |
April 17, 2013, 09:27 PM | #8 |
Junior Member
Join Date: November 25, 2012
Posts: 9
|
Go to local shooting range. Pick them up along with all the other brass you can find!
|
April 17, 2013, 11:07 PM | #9 | |
Senior Member
Join Date: December 10, 2005
Location: Central , OR
Posts: 1,888
|
Quote:
PM me if interested. |
|
April 18, 2013, 04:23 AM | #10 |
Senior Member
Join Date: April 12, 2013
Location: South of Interstate 20
Posts: 219
|
Also have 243 brass. Need 44 mag brass. If interested, let me know.
|
April 18, 2013, 11:48 AM | #11 |
Senior Member
Join Date: January 8, 2008
Posts: 803
|
If anybody needs .30-06 brass, let me know. I probably have 750-800 available.
|
April 18, 2013, 04:53 PM | #12 |
Senior Member
Join Date: March 12, 2012
Location: Land of Enchantment
Posts: 436
|
I seem to end up with twice as much 45 brass as I bring when I go to the local indoor shooting range.
|
April 18, 2013, 05:31 PM | #13 |
Senior Member
Join Date: April 12, 2013
Location: South of Interstate 20
Posts: 219
|
Doesn't seem to happen that often with revolver brass, especially 44. Doubt much of it ever hits the ground.
|
|
|