October 11, 2009, 05:53 PM | #1 |
Senior Member
Join Date: August 17, 2008
Location: SE North Carolina
Posts: 203
|
Define Muffin Tin
Know that "plumbers lead" comes in a Muffin shaped 5 lb ingot. Could you just pour wheelweights or alloy in sheet metal muffin pans for production runs? Be a little more practicle than 1 lb ingots.
|
October 11, 2009, 06:17 PM | #2 |
Senior Member
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,969
|
yep as long as there not aluminum or teflon coated & are real metal.
some like the cast iron cornbread muffin & the ones shaped like an ear of corn. i have angle iron welded together to form V shaped ingots , once ya learn how thick to pour em ya can almost guess the weight!
__________________
GP100man |
October 11, 2009, 06:25 PM | #3 |
Senior Member
Join Date: April 5, 2008
Location: South Central Minnesota
Posts: 584
|
Muffin tin... muffin pan.
I stole the one my wife used in the kitchen. It was an old steel pan. It works just fine. |
October 11, 2009, 06:42 PM | #4 |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
When I do the smelting process, I use both Sheet Metal and Aluminum muffin pans or trays. Have used cast iron. We like them small and round. The five pound ingots are smelted as well and broken down into the smaller round ones. I also cast the very small muffin pan ingots and insert a copper loop to be used for decoy weights.
Be Safe !!! |
October 11, 2009, 07:57 PM | #5 |
Senior Member
Join Date: December 12, 2006
Posts: 1,512
|
I stole a cheap one out the kitchen and the cups on it were pressed in and when I tried to bang out the ingots the cups stayed with the ingots.
I use a cast iron corn cob pan now. |
October 11, 2009, 08:00 PM | #6 |
Senior Member
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 3,055
|
Here's a couple of the muffin pans we used while smelting range lead.
At the very bottom you just can see two teflon coated aluminum tins. The one more in the center is a 12 hole steel "tin". Both worked fine, the alum tins were a bit smaller around 2 lbs. The steel were almost 3 pounds. They don't stack as well as 1 lb. ingots.
__________________
The more people I meet, the more I love my dog They're going to get their butts kicked over there this election. How come people can't spell and use words correctly? |
October 13, 2009, 02:38 AM | #7 |
Senior Member
Join Date: May 29, 2008
Location: now living in alabama
Posts: 2,433
|
I found that cast iron seem to work the best.....they stick less.
__________________
No such thing as a stupid question. What is stupid is not asking it. |
October 13, 2009, 10:29 AM | #8 |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
WOW snuffy,
Sure hope moma doesn't let you in the kitchen !! That muffin pan is the same kind I use for my larger round ingots. We like the round ones cause they fit better in the caster. I also put a small piece of candle wax in the bottom of each pocket, just once, before pouring and that seems to keep the lead from sticking. We use a propane turkey cooker burner when we smelt; what do you use? We also use an old plumbers ladle just like the one you have and it works great. By the way, my wife won't let me in the kitchen and won't say what she calls me. ... Be Safe !!! |
October 13, 2009, 12:27 PM | #9 | |
Senior Member
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 3,055
|
Quote:
As far as a wife, don't have one, so I decide what gets used and when. It's gonna stay that way too. That's a rowel #3 ladle, holds about 3#. I also have a #4, it's about 4.5#, but requires 2 hands to use. Both are bottom pour.
__________________
The more people I meet, the more I love my dog They're going to get their butts kicked over there this election. How come people can't spell and use words correctly? |
|
|
|