November 8, 2005, 01:16 PM | #1 |
Junior member
Join Date: January 18, 2005
Posts: 3,298
|
Paddle Holsters
I currently own and ever now and then wear my paddle holster for my 1911 A-1 full government. I recently put on order a paddle holster for my Colt Official Police revolver. A problem that occurs is that when I draw the 1911, sometimes the holster will pull right off my belt with the gun. Reason being is that the width of my belt is too small. I have to wear bigger belt. I can do this okay when wearing something casual like blue jeans, however if I am wearing a suite or even a sportcoat and tie, a larger belt looks kinda...out of place. Is there a way to adjust these holsters or do they come in different sizes or what. Am I just having a bad experience with one holster? I hope my revolver holster isn't like this when I get it... I ordered it from Don Hume. I wear the OP more than any of my handguns.
|
November 8, 2005, 07:21 PM | #2 |
Senior Member
Join Date: October 12, 2004
Location: Viera, Florida
Posts: 1,340
|
Your belt not only has to be wide enough, it also has to be thick and stiff. Fobus and Blade-Tech paddle holsters work fine for me with a 1 1/2" Dillon belt. It's very heavy-duty.
A regular-weight dress belt won't do the job. John Cape Canaveral |
November 8, 2005, 08:06 PM | #3 |
Member
Join Date: September 30, 2005
Location: Wyoming
Posts: 60
|
I had a fobus paddle holster (that ended up being the wrong one, older discontiuned model, long story, anyways) and I had to put one hand on the holster and one on the gun to remove it because the tension on the holster way way too much. On top of that, it never once came loose from my pants. I wear slacks, button down dress shirt and skinny belt every day for work. I was giving myself wedgies lmfao. The holster wasn't going anywhere. The design of the paddle was that good. I had to actually put a lot of effort just to remove the holster from my pants. Try a fobus, they are cheap too. $25.
__________________
Give me 3 stacks of High Society Springfield XD-40 |
November 9, 2005, 07:25 AM | #4 |
Senior Member
Join Date: February 20, 2005
Location: Mouth of the Rat, Florida
Posts: 1,778
|
+1 on the fobus. They stay put for me also.
__________________
I grew up in New Jersey, but later moved to Florida and made a complete recovery. Keltec: The BIC lighter of handguns http://jkwasblog.blogspot.com/ |
November 9, 2005, 12:20 PM | #5 |
Senior Member
Join Date: December 26, 2001
Location: western wa.
Posts: 564
|
I like the Uncle Mikes ones. They have a little adjustable hook thingy on the paddle that hooks under the waist band seem of your pants. I have never had ot pull off with the gun. It takes two hands to get the holster. I have worn it many times with no belt at all, and it worked fine. The tension is also adjustable, too.
__________________
"There is no spoon..." |
November 9, 2005, 12:36 PM | #6 |
Senior Member
Join Date: July 3, 2005
Location: Indiana
Posts: 149
|
I use paddle holsters often and have for a number of years. I use to run in and out of goverment locations a lot. Now a days it is more schools and courthouses. I have found that the cheaper ones do not work well. The two I use the most are a Safariland for my Sig 228 and a Binachi #56L for my Mod 66. I have used both with thinner dress belts without a problem.
The Safariland has a hook that will catch under your belt if it decides to try and come out with the gun. I have had that happen a couple of times but was only when I wore a very thin belt and was not very tight. The holster only rode up a little bit and the plastic hook caught. Not really a problem to me. Not sure the Model number on this holster, but has 5181 K93 on the back of it. The Binachi uses a stiff paddle covered in rough leather but I mostly wear this holster with bluejeans and a thicker belt so it does hold rather well. I don't remember drawing the gun the couple times I wore it with dress pants and thinner belts. I do know it is not easy to take off without unbuckling my belt. I have a Fobus for the Sig and it works quite well but I find the Safariland more comfortable to wear. Have you thought about putting a small piece of velcro on the paddle toward your pants, between the holster and paddle? The velcro may grab the material of your pants enough to keep the holster in place. I do this with the consoles I use in my mini-van. I use only the hook side and the stick-on type. It keeps the aftermarket consoles from sliding around on the carpet. Might work on your paddle holster.
__________________
Chuck in Indiana |
November 9, 2005, 09:06 PM | #7 |
Senior Member
Join Date: March 12, 2005
Location: New Mexico
Posts: 212
|
The Uncle Mike's are great...I've never needed a belt with mine, and the tension is adjustable. The downside is they stink for concealment.
|
November 9, 2005, 10:56 PM | #8 |
Senior Member
Join Date: November 17, 2004
Location: North Texas
Posts: 641
|
I have a "High Noon" paddle holster for my CZ RAMI .40, and it is an
excellent holster. I don't wear it often, but when I need it, I know it will do it's job. Most days I pack my RAMI in a Don Hume 'IWB' holster made for the USP Compact. It fits like a glove, and it is a good holster. Most importantly, it is comfortable. Walter |
November 14, 2005, 08:28 PM | #9 |
Senior Member
Join Date: August 20, 2004
Location: Southeastern WV (left out "north")
Posts: 195
|
My Rocket Man Low Rider (Kydex) was great for concealment and easy on & off. Notice I said was. After many, many on's & off's over 2 yrs the hinge thingy has finally given up. At $50 it's almost 2x's the Fobus, but a helleva lot more concealable. My Uncle Mike's requires dropping drawers, hammer and screwdriver to remove. Thanks, anyway. They say a gun can be stripped out of a Fobus simply by downward pressure popping the rivets (one of which was missing from mine, new).
Stay safe. Bob |
November 14, 2005, 08:47 PM | #10 |
Senior Member
Join Date: August 11, 2005
Posts: 1,177
|
My first choice in a paddle holster is Safariland's 518, second choice is the Fobus. I have an Uncle Mike's nylon paddle, it does NOT have the hook like the Safariland and it is only a year old but seems to have "loosened-up" so that if your belt is not tight the gun and holster slide and shift. That doesn't happen with the Safariland and I've been carring a full size .45 in it for +/-20 years.
__________________
America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards. Claire Wolfe |
November 14, 2005, 09:31 PM | #11 |
Senior Member
Join Date: June 18, 2004
Location: Central Ohio
Posts: 2,568
|
Doug, . . . take a look at Galco's "Fed" paddle, I have one for my Springer full size 1911, . . . and it is great, . . . albeit a bit pricey.
I wear it with any size belt, . . . my worst complaint is that sometimes it is a real pain to get off, . . . but that is usually with Wallyworld jeans. http://www.usgalco.com/HolsterG3.asp...=349&GunID=157 May God bless, Dwight
__________________
www.dwightsgunleather.com If you can breathe, . . . thank God! If you can read, . . . thank a teacher! If you are reading this in English, . . . thank a Veteran! |
November 15, 2005, 01:34 AM | #12 |
Senior Member
Join Date: December 6, 2004
Posts: 295
|
*
Dwight: I have a Galco Speed paddle for a J-frame and also have trouble taking-it-off. I think I'm gonna unholster and secure the revolver in my vehicle if I have to go unarmed and keep the holster on my belt. ('course even that may not be well liked in the court house!)
|
November 15, 2005, 11:47 PM | #13 |
Member
Join Date: November 9, 2005
Location: Ardmore, OK
Posts: 27
|
I also have a 1911 that I carry in a Fobus holster. I picked it up used for $9.
I have not had a problem with the holster staying put. It may move a little bit forward and backward during use, but it is not very noticeable. A couple issues with the Fobus; 1) My holster doesn't seem to have a lot of weapon retention. This hasn't been a problem, yet. 2) I have noticed that the Fobus holster seems to wear a finish really fast, and in certain places. No big deal to me, but it may be to you. Any holster will wear a finish, at least to some extent. Positives; 1) As I said, the holster remains clamped to my waist, regardless of what belt I use, yet I can easily remove the holster when ever I choose. 2) Only cost me $9. YMMV. $20-25? 3) The plastic is very durable. 4) It will accommodate all lengths of 1911s- Officers, Commander, Full size. Take care, John
__________________
Just a Joe Schmoe. |
November 16, 2005, 05:55 PM | #14 | |
Staff Alumnus
Join Date: December 7, 1998
Location: Jacksonville, NC
Posts: 1,380
|
Quote:
__________________
“This is my rifle, there are many like it but this one is mine …” MOLON LABE ! I’m a G-CODE holster fan ! www.range5.com |
|
November 16, 2005, 07:13 PM | #15 |
Senior Member
Join Date: June 26, 2005
Posts: 619
|
paddle hoslters
I sell Fobus paddle holsters, conatact me via the for sale forums on this site. I am sure I can get you the holster you need.
|
November 16, 2005, 07:18 PM | #16 |
Member
Join Date: November 12, 2005
Location: Iowa
Posts: 18
|
Walther p99
Scott
In regards to your G-code line Is there a IWB holster made for a Walther p99 QA 4" barrel? .40. I currently own a Fobus it does the job.... But I would like to conceal it a bit more. Im a construction worker so heavy pants and belts are no real problem. but I believe an IWB holster might be the trick. Thanks Methius Shoot straight Shoot fast.... Aim small miss small. |
November 17, 2005, 07:19 PM | #17 |
Junior Member
Join Date: August 9, 2005
Location: coast of SC
Posts: 8
|
+2 on the Galco FED bit pricey but lasts. Mine is around 4 years old still as nice and tight as the day I got it. Worn at least 5 out of 7 days a week. Still have a hard time getting it off sometimes.
|
|
|