January 19, 2013, 05:05 PM | #1 |
Senior Member
Join Date: March 5, 2011
Location: NC
Posts: 252
|
Variations in primers
So far, I've been loading CCI small pistol primers in my Lee Safety prime, on the press. Never had any problem.
The only primers I found at the last gun show were Winchester or Federal. I had heard of too many problems with the Federal primers, so I bought the Winchesters. They don't slide down the chute quite as smoothly as the CCI's did. This is the first time I've had primers seat sideways or upside down. Anyone else noticed that the Winchester primers appear to be just a tad thicker than the CCI's?
__________________
JOIN THE NRA! |
January 19, 2013, 05:53 PM | #2 |
Senior Member
Join Date: December 5, 2009
Posts: 1,411
|
I don't have a Lee press. I have never had any problems with Winchester primers that I can remember. I prefer them over all others with my press.
|
January 19, 2013, 11:54 PM | #3 |
Senior Member
Join Date: January 25, 2009
Location: Liberty Twp, OH
Posts: 283
|
I do not recall any issues with using Win or Rem vs CCI. I do use mostly small CCIs. The Lee Safety primer on the press (single or turret) should give you plenty of opportunity to see if the primer is oriented correctly prior to seating it the wrong way. Any off chance you are using the wrong size primer pan (black vs white)? IIRC white is for large primers, black Safety Prime is for small.
|
January 20, 2013, 01:31 AM | #4 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
Winchester primers these days are of the brass color. They used to be nickel plated like the CCI primers are. That plating makes a big difference in how well they slide, especially in Lee plastic chutes.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
January 20, 2013, 08:44 AM | #5 |
Senior Member
Join Date: January 22, 2005
Location: Kentucky
Posts: 3,623
|
Regarding your feed problems, I'd call Lee and see what they have to say. I do know that my Dillon 550B presses will not feed CCI's reliably, but have no problem with Winchesters...if anything, I'd say that the CCI's have a slightly larger diameter then Winchesters, tho I've never checked them with a Mic. You might try cleaning your primer feed tube or feed assembly...they do tend to accumulate primer dust, which is also a NS fire hazard.
As to reliability, I've used Winchester primers almost exclusively for over 30 years in all sizes with no problems....everything from .22 Hornet to .45-70. I've had no problems even with 100 yr+ old Winchester lever guns in .44-40 and .38-40, with their relatively light hammer blows. In the handgun calibers, I've used them with tip-up S&W's in .32 S&W, and several Colts of 1900 vintage, again with no problems. HTH's, Rod
__________________
Cherish our flag, honor it, defend it in word and deed, or get the hell out. Our Bill of Rights has been paid for by heros in uniform and shall not be diluted by misguided governmental social experiments. We owe this to our children, anything less is cowardice. USAF FAC, 5th Spl Forces, Vietnam Vet '69-'73. Last edited by rodfac; January 20, 2013 at 08:50 AM. |
January 25, 2013, 08:17 PM | #6 |
Member
Join Date: November 11, 2009
Posts: 98
|
Over the years I've used Winchester, Remington, CCI and Federal primers and never saw any difference (on metallic cartridges) other than how they package them. I do remember years ago having some Winchester 209's that were so hard that my older double barrel's rounded firing pins wouldn't set them off where my 1100 would bust'm just fine.
And I prefer the primers packaged laying on their side in small square packages that my primer tray completely covers just for the ease of loading them into my primer feeder. |
|
|