The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools Search this Thread
Old January 14, 2013, 08:26 PM   #1
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
Model 70 trigger developed "creep"

Howdy all,

Back in August, I bought a brand spankin' new Winchester Model 70 Featherweight in .308 win after drooling over it for a while. It shot great for the first 4 trips to the range, then I started noticing about 1 out of every 10 trigger pulls the trigger would slip about 1/2 way through. Another 2 trips to the range later, it slips every time. I googled the M70 trigger issue, and most others had issues with the gun going off unintended, but not like what I'm experiencing. Anyone have a suggestion?

P.S.- I called Winchester, and they offered to look at it if I would ship it to them. I told them I spent all my money on their $750 rifle and also couldn't risk the rifle getting stolen from USPS workers. Not an option for me. Also, 1 local pawnshop gunsmith looked at it and said he didn't know what the problem was.
shredder4286 is offline  
Old January 14, 2013, 09:02 PM   #2
Cowboy_mo
Senior Member
 
Join Date: June 23, 2010
Location: Missouri
Posts: 1,039
A couple suggestions

I would call Winchester again and ask to speak to a tech support supervisor. My guess is you will have more success.

If that doesn't work, take it back to where you purchased it 'brand spankin new' and see if they will send it back to Winchester for you.

If that fails, check out this article (http://www.snipercountry.com/Article...WinTrigger.asp) on how to adjust a Winchester trigger.

From my experience and the discussion of others, Model 70 triggers are extremely easy to adjust.
Cowboy_mo is offline  
Old January 14, 2013, 09:07 PM   #3
reynolds357
Senior Member
 
Join Date: December 10, 2012
Posts: 6,158
Send it back to Winchester and insure it. Tech support due to liability issues is not going to diagnose a trigger problem on the phone. Either send it off, take it to a good gun smith, or install a custom trigger. I just UPS ed a #1 tropical to Ruger and honestly I wish it had gotten stolen.
reynolds357 is offline  
Old January 14, 2013, 09:33 PM   #4
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
Quote:
I would call Winchester again and ask to speak to a tech support supervisor. My guess is you will have more success.
Ok, I will certainly do that. Sometimes you gotta talk to the boss to get 'er done.

Quote:
Send it back to Winchester and insure it.
I wasn't kidding about having spent all my fun $$ on the rifle. If I absolutely have to, I could scrounge $40-50 from change jars and borrow from a friend to pay a gunsmith, but I shouldn't have to. It's a $750 rifle.

Last edited by shredder4286; January 14, 2013 at 09:53 PM.
shredder4286 is offline  
Old January 14, 2013, 10:35 PM   #5
reynolds357
Senior Member
 
Join Date: December 10, 2012
Posts: 6,158
I know you shouldn't have to. When I sent my WBY in for warranty work, they paid the postage. (I'm not talking about a $3k MArk 5, but a $400 Vangard.) You could probably get Winchester to foot the bill. While you are on the phone, start talking about it being "dangerous."
reynolds357 is offline  
Old January 14, 2013, 10:39 PM   #6
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
I had a $250 kel-tec PF9 that wouldn't shoot any brand/bullet weight in 9mm. They paid for the shipping all THREE times it went back to the factory. I finally sold it.
I wasn't as worried about a little pistol getting shipped around, as the little box could be anything. But a long, skinny box... would raise an eyebrow or two of postal workers.
shredder4286 is offline  
Old January 18, 2013, 01:20 AM   #7
ndking1126
Senior Member
 
Join Date: January 26, 2008
Location: Madison, AL
Posts: 1,932
What do you mean by slip? Does it not fire unless you reset the trigger?

I installed a Rifle Basix trigger on a Savage and it was great for roughly 500 trigger pulls, but then it started down hill. I felt it was getting to the point of being unsafe, so I took it back apart. The sear was rounded off, which caused creep and also it wasn't a clean break (at all) so I wasn't sure exactly when it would go off or even if it would go off without me wanting it to. I took the trigger apart and put it back together. Safe again, but the trigger doesn't break as crisply as it used to and I had to make the trigger pull heavier.

I would call back and politely let Winchester know you feel its their responsibility to pay for shipping if there is no local gunsmith certified to do their warranty work.

Good luck and let us know! It's always good to hear about customer service experiences.

Last edited by ndking1126; January 18, 2013 at 01:51 PM.
ndking1126 is offline  
Old January 18, 2013, 02:00 AM   #8
silvermane_1
Senior Member
 
Join Date: November 6, 2011
Location: Burien,WA
Posts: 897
little off topic but, reynolds357 what happened when sent your #1 tropical off to ruger to make you wish it got stolen during shipping?, cuz i was thinking of getting a #1 tropical in the near future, and i always hear good things about ruger CS and repair dept.
__________________
Rugers:SR1911 CMD,MK 3 .22lr 6",Sec. Six '76 liberty .357 4",SRH .480 Ruger 7.5",Mini-14 188 5.56/.233 18.5", Marlins: 795 .22lr 16.5",30aw 30-30 20",Mossberg:Mav. 88 Tact. 12 ga, 18.5",ATR 100 .270 Win. 22",S&W:SW9VE
9mm 4",Springfield:XD .357sig 4", AKs:CAI PSL-54C, WASR 10/63, WW74,SLR-106c
silvermane_1 is offline  
Old January 18, 2013, 09:58 AM   #9
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
The Win. 70 trigger is easy to self-adjust. Almost any new gun needs some tinkering. I have a small distributor wrench (apx. 1/4") and a right angle screwdriver (I made by grinding a hex wrench) in my range box just to work on my trigger if necessary. Initially, I adjusted my trigger to where I wanted it but haven't touched it in 30 years. I did use it once on a friends 70. I'm not a gunsmith. Do take a look and consider adjusting yourself. Often gun parts need to wear in before they are just right.
Rifleman1776 is offline  
Old January 18, 2013, 04:34 PM   #10
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
Quote:
The Win. 70 trigger is easy to self-adjust.
Yeah, that's what I keep hearing. I can't get the action out of the stock. It's like it's glued in there. I'm assuming it's because it's bedded?

I met a guy last week at the local gun show who said he'd take a look at it for free, so I'm gonna run it over to his house this weekend hopefully. If he can't get it fixed, I'll pursue it with Winchester.
shredder4286 is offline  
Old January 18, 2013, 04:59 PM   #11
Slamfire
Senior Member
 
Join Date: May 27, 2007
Posts: 5,261
Quote:
If he can't get it fixed, I'll pursue it with Winchester.
If he can't, don't mention that anyone touched the thing when you talk to Winchester. They may void any warranty.

I am unfamiliar with the new M70 trigger mechanism but if it is like other over ride triggers, disassembling the mechanism and polishing the parts is not for the novice.

My guess is that you can jack up the trigger pull weight to the point you don't feel creep, but I would hate to use a 6 pound trigger on a M70.
__________________
If I'm not shooting, I'm reloading.
Slamfire is offline  
Old January 18, 2013, 05:04 PM   #12
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
Quote:
My guess is that you can jack up the trigger pull weight to the point you don't feel creep, but I would hate to use a 6 pound trigger on a M70.
Agreed!
shredder4286 is offline  
Old January 18, 2013, 06:44 PM   #13
Joe Chicago
Senior Member
 
Join Date: November 11, 2011
Location: Chicago area
Posts: 277
The factory should cover shipping. I had problems with a Remington that needed to go back to the factory and they covered it both ways. If they do not, start asking for supervisors and get grumpy. It is amazing how they can make "an exception" for a demanding customer.
Joe Chicago is offline  
Old January 18, 2013, 06:51 PM   #14
taylorce1
Senior Member
 
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,192
I should be back in COS in two weeks, give me a call and we'll take care of it. I should be in town for a little while as it looks like I'll be furloughed for about a month. If we can't figure it out I'm sure my buddy with the private range can help us.

I sure wish Winchester had stuck with the old trigger!
__________________
NRA Life Member
taylorce1 is offline  
Old January 18, 2013, 08:33 PM   #15
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
Quote:
I should be back in COS in two weeks,
You've got timing I'm outta here in about 4 weeks.

Quote:
I sure wish Winchester had stuck with the old trigger!
What's the old saying? Oh yeah- "If it ain't broke, don't fix it!"
shredder4286 is offline  
Old January 18, 2013, 09:06 PM   #16
coyota1
Senior Member
 
Join Date: April 6, 2008
Location: West Michigan
Posts: 663
If I were you I would take to a gunsmith. I don't believe you would be happy with a factory fix.
coyota1 is offline  
Old January 18, 2013, 09:18 PM   #17
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
Quote:
I don't believe you would be happy with a factory fix.
Yeah? You think they would just slop some rem oil on it and send it back?
shredder4286 is offline  
Old January 18, 2013, 09:31 PM   #18
coyota1
Senior Member
 
Join Date: April 6, 2008
Location: West Michigan
Posts: 663
Quote:
Yeah? You think they would just slop some rem oil on it and send it back?
I would bet it would come back stiff and creepy, and that's not a fix to me.
coyota1 is offline  
Old January 18, 2013, 09:41 PM   #19
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
Quote:
I would bet it would come back stiff and creepy, and that's not a fix to me.
Yeah, I don't want it any heavier than it is. I would guess that it's at 5 lbs from the factory, and I would mind if it was a little lighter if anything. Creepy's not good, either
shredder4286 is offline  
Old January 18, 2013, 10:08 PM   #20
reynolds357
Senior Member
 
Join Date: December 10, 2012
Posts: 6,158
Silvermine, I wish it had gotten stolen because I had it insured for $1600 and I really no longer have a true need to own a .416 Rigby. Nothing wrong with Ruger or the 1H Tropical. Nice rifle, beautiful wood, but not worth $1600 to me. When it gets back I am going to sell it. A dealer I know says he can get $1400 to $1600 for it from someone he knows that wants one in Rigby real bad. It would just be simpler to collect the insurance than let him ship it and pay him his 10% and freight.
reynolds357 is offline  
Old January 18, 2013, 10:12 PM   #21
reynolds357
Senior Member
 
Join Date: December 10, 2012
Posts: 6,158
The Rem 700 trigger has a reputation for being dangerous. The Win. 70 does not have that reputation, but I have never had a 700 fire when safety was flipped off and I have two 70's that would repeatedly do this. Both of them got new triggers. One of them was eratic. The other would fire every time you pulled the trigger then flipped off the safety. It was the old company (pre FN) but trying to deal with their customer service was like trying to deal with a brick wall. FN should be a different story.
reynolds357 is offline  
Old January 18, 2013, 10:24 PM   #22
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 3,993
Just save your money and get a good aftermarket trigger. They aren't hard to install, and that'll keep all the shipping, handling, insuring, and customer service interacting to a minimum.
603Country is offline  
Old January 18, 2013, 10:39 PM   #23
Blue1
Member
 
Join Date: November 30, 2012
Posts: 66
Get a Savage

My model 16 was in that $750 ballpark. It has the Savage Accutrigger, breaks like glass, I've yet to try and lighten it up (it's easily adjustable), I guess that as factory adjusted it trips at about 4 lbs.

I have at least 1000 rounds though this rifle and have not noticed any difference in the trigger from when it was brand new.

Also, Accutriggers are not known to be tempermental like Remington 700s. I am not aware of that problem with Winchesters, but you're right, you spend that kind of coin on a rifle and the damn thing should shoot fine for many years.

Blue1
Blue1 is offline  
Old January 18, 2013, 10:49 PM   #24
shredder4286
Senior Member
 
Join Date: May 13, 2010
Location: NE Washington
Posts: 361
Quote:
Get a Savage
Seriously, man! I have a model 14 american classic in .243 with the accutrigger, and I love it It was about $500 brand new, too.

Quote:
I am not aware of that problem with Winchesters, but you're right, you spend that kind of coin on a rifle and the damn thing should shoot fine for many years
.

I haven't heard of anyone else having the exact same issue I'm having, but have heard lots of reports similar to what Reynolds357 said. I suppose I got lucky if all I have is creep, but that's expensive creep!
shredder4286 is offline  
Old January 19, 2013, 12:17 AM   #25
silvermane_1
Senior Member
 
Join Date: November 6, 2011
Location: Burien,WA
Posts: 897
thanks reynolds357 for the info, i thought the reply was going to be about a ruger cs/repair nightmare story.
__________________
Rugers:SR1911 CMD,MK 3 .22lr 6",Sec. Six '76 liberty .357 4",SRH .480 Ruger 7.5",Mini-14 188 5.56/.233 18.5", Marlins: 795 .22lr 16.5",30aw 30-30 20",Mossberg:Mav. 88 Tact. 12 ga, 18.5",ATR 100 .270 Win. 22",S&W:SW9VE
9mm 4",Springfield:XD .357sig 4", AKs:CAI PSL-54C, WASR 10/63, WW74,SLR-106c
silvermane_1 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:59 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.09005 seconds with 10 queries