.22 LR Makarov Conversion (NITI) Bulgaria DUNAV

Gregory Gauvin · August 21, 2014, 10:51 PM

I did a complete strip of the slide of this conversion kit to clean the firing pin, channel, ejector, etc... There are 2 small screws in the top of the slide that hold in place the "block" within the slide that contains the breech face, firing pin, extractor. Upon reassembly, and I spent hours, for the life of me I can not get the slide reassembled. The 2 small screws do screw in fine, but when I put it back onto the pistol frame, everything jams up. Am I missing something here? Is there a trick?

gyvel · August 23, 2014, 07:03 AM

Pictures would help.

August 21, 2014, 10:51 PM	#1
Gregory Gauvin Senior Member Join Date: March 6, 2009 Posts: 368	.22 LR Makarov Conversion (NITI) Bulgaria DUNAV I did a complete strip of the slide of this conversion kit to clean the firing pin, channel, ejector, etc... There are 2 small screws in the top of the slide that hold in place the "block" within the slide that contains the breech face, firing pin, extractor. Upon reassembly, and I spent hours, for the life of me I can not get the slide reassembled. The 2 small screws do screw in fine, but when I put it back onto the pistol frame, everything jams up. Am I missing something here? Is there a trick?

August 23, 2014, 07:03 AM	#2
gyvel Senior Member Join Date: August 30, 2009 Location: Northern AZ Posts: 7,172	Pictures would help. __________________ As always, YMMV. __________________________________________ MIIAA SIFE