Best Flip up Sights For AR15

highcomp450 · July 17, 2016, 12:53 AM

What are some of the best flip up sights out there?

Sent from my SCH-I605 using Tapatalk

Targa · July 17, 2016, 09:52 AM

Standard Magpul (MBUS). Won't break the bank, work well and besides you will red dot or scope it eventually anyway and rarely use those sights..

highcomp450 · July 17, 2016, 10:22 AM

Quote:

Originally Posted by Targa

Standard Magpul (MBUS). Won't break the bank, work well and besides you will red dot or scope it eventually anyway and rarely use those sights..

Thank you for your feed back, makes sense!

Sent from my SCH-I605 using Tapatalk

tahunua001 · July 17, 2016, 03:01 PM

I personally hate the MBUS sight picture. I bought a set because "it didn't break the bank" and immediately regretted it.

Polinese · July 17, 2016, 03:19 PM

I like the Magpul pro sights especially the new LR one just to have that elevation option on the rear sight. I've put them on both my ar's

TimW77 · July 18, 2016, 03:03 AM

Another vote AGAINST the MagPul sights...

Although the rear sight is serviceable, their front sight is garbage...

What sights I like depends on the use/need for the sights...

For true back-up sights I prefer the YHM front sight and one of the GG&G "MADD" rear sights...

T.

candr44 · July 18, 2016, 08:54 AM

If you buy the Magpul plastic sights, make sure you are not getting cheap Chinese knockoffs. The Chinese made sights look just like Magpul but the quality is very poor. The springs are weak and the tolerances are loose to the point of being useless.

Magpul also makes a MBUS Pro series that are all metal. I have a set that works well on my AR.

imp · July 18, 2016, 09:42 AM

I like Troy and YHM. I don't think you'd go wrong with either brand.

Screwball · July 18, 2016, 10:36 AM

I have MBUS on my .45 AR, and MBUS Pros (standard ones) on my 5.56mm. The .45 is D/I, with a free floated barrel... so no heat issues where they are installed.

My 5.56mm is a Spikes upper with an AA piston kit. That gas block does get hot, so opted for the metal.

Between the two, I like the Pro profile. But not everyone wants to invest that much on a backup iron sight.

swede4198 · July 19, 2016, 10:27 PM

I like the Troy diopter sights as my old eyes work better with a diamond rear aperture compared to the normal round one.

dakota.potts · July 20, 2016, 12:09 AM

I found a Matech online for something like $25 plus a little for shipping. These are military surplus rear sights and they are all metal. Mine installed at the rear of my Picatinny within a couple inches of point of aim before I even zeroed it.

It's also got settings for elevation between 100 and 600m. Your 300m is where you zero at 25m for your "combat zero" and the others are fine adjustments.

Old Bill Dibble · July 28, 2016, 06:54 PM

MAGPUL MBUS pro metal if you hate the standard MBUS.

FrankenMauser · July 28, 2016, 09:30 PM

For backup sights? I don't know, or really care, honestly. (But, my opinion of the MBUS set is that they belong on Air-Soft toys, not real guns.)

For primary sights? YHM or Troy. I find myself gravitating toward YHM (and own both 'automatic' and 'manual' versions).

Pacman · July 30, 2016, 06:58 PM

If you are mounting the front sight on the gas block, be aware that the MBUS is made of plastic and will melt. Yankee Hill would be my go to.

armedleo · July 30, 2016, 07:02 PM

Go with Magpul for all the reasons stated above.

PPQ226guy · July 30, 2016, 09:28 PM

Troy or LMT

stangbangr · July 30, 2016, 10:19 PM

I have YHM, MBUS (rear only), MBUS PRO and Troy (rear only). Once they're zeroed I never use them so I don't have much of a preference one way or another. If I buy another set it'll probably be YHM though.

orsogato · July 30, 2016, 10:29 PM

Troy Industries. Hands down.

Dragline45 · July 31, 2016, 10:26 AM

Believe it or not MBUS sights hold up to abuse far better than Troy and other aluminum sights.

Quote:

One thing I did not mention in the post which was sent to KitUp (due to word count limitations) was that after dropping the MBUS twice, I picked the rifle up, held it over my head like the maul I used to split seasons’ worth of firewood while growing up in Alaska, and swung it down on a concrete shooting table, with the MBUS taking all of the impact. It did not break or shift POI by anything more than 1MOA.

My opinion of the MBUS went from “cool airsoft gear bro” to “wow."

http://kitup.military.com/2012/07/ba...drop-test.html

http://www.vuurwapenblog.com/reviews...tic-drop-test/

HughScot · July 31, 2016, 10:47 AM

After looking at the Troy Industries Di-optic aperture folding rear sight I would say if you are seriously interested in long range accuracy this sight looks great. I would really like to try it out. Of course it's expense.

marine6680 · July 31, 2016, 11:17 AM

The MBUS sights (real ones) are tougher than most people realize.

But they are a bit bulky due to the polymer construction, and that affects the sight picture.

They are perfectly serviceable as backup sights, to a quality red dot. As they will be used little...

I do really like the MBUS Pros, as they are small/trim, metal and still reasonable in price. On sale a set is around $125.

There are some very nice folding sights out there, but for a sight I will use very little, they tend to cost too much, especially when compared to other sights that work well and at a lower price.

40CalGuy · July 31, 2016, 02:10 PM

nothing polymer. no knock-offs. troy, mbus pro, spike's, etc are fine.

odugrad · August 1, 2016, 07:47 AM

Troy. No need to look anywhere else.

Dirty_Harry · August 1, 2016, 07:55 AM

Not a fan of plastic sights, though the magpuls seem to work.

Another vot for Troy's.

MagnumWill · August 1, 2016, 07:56 AM

I own both MBUS and Troy diopter sights. Troy is much more expensive, but worth it. Buy once, cry once. Don't forget a set of MBUS are still kind of expensive for plastic (sorry, "polymer"

) sights, so it may make sense to throw down the extra $40 and get good metal Troy sights.

July 17, 2016, 12:53 AM	#1
highcomp450 Junior Member Join Date: February 15, 2016 Posts: 10	Best Flip up Sights For AR15 What are some of the best flip up sights out there? Sent from my SCH-I605 using Tapatalk

July 17, 2016, 03:01 PM	#4
tahunua001 Senior Member Join Date: July 21, 2011 Location: Idaho Posts: 7,839	I personally hate the MBUS sight picture. I bought a set because "it didn't break the bank" and immediately regretted it. __________________ ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin

July 20, 2016, 12:09 AM	#11
dakota.potts Senior Member Join Date: February 25, 2013 Location: Keystone Heights, Florida Posts: 3,084	I found a Matech online for something like $25 plus a little for shipping. These are military surplus rear sights and they are all metal. Mine installed at the rear of my Picatinny within a couple inches of point of aim before I even zeroed it. It's also got settings for elevation between 100 and 600m. Your 300m is where you zero at 25m for your "combat zero" and the others are fine adjustments. __________________ Certified Gunsmith (On Hiatus) Certified Armorer - H&K and Glock Among Others You can find my writings at my website, pottsprecision.com.

July 28, 2016, 09:30 PM	#13
FrankenMauser Senior Member Join Date: August 25, 2008 Location: In the valley above the plain Posts: 13,424	For backup sights? I don't know, or really care, honestly. (But, my opinion of the MBUS set is that they belong on Air-Soft toys, not real guns.) For primary sights? YHM or Troy. I find myself gravitating toward YHM (and own both 'automatic' and 'manual' versions). __________________ Don't even try it. It's even worse than the internet would lead you to believe.

July 31, 2016, 02:10 PM	#22
40CalGuy Senior Member Join Date: March 28, 2005 Location: southwest usa Posts: 424	nothing polymer. no knock-offs. troy, mbus pro, spike's, etc are fine. __________________ Entirely too many toys to list.

July 17, 2016, 09:52 AM	#2
Targa Senior Member Join Date: March 20, 2014 Posts: 2,084	Standard Magpul (MBUS). Won't break the bank, work well and besides you will red dot or scope it eventually anyway and rarely use those sights..

July 17, 2016, 03:19 PM	#5
Polinese Senior Member Join Date: September 27, 2010 Posts: 949	I like the Magpul pro sights especially the new LR one just to have that elevation option on the rear sight. I've put them on both my ar's

July 18, 2016, 03:03 AM	#6
TimW77 Senior Member Join Date: September 21, 2008 Posts: 485	Another vote AGAINST the MagPul sights... Although the rear sight is serviceable, their front sight is garbage... What sights I like depends on the use/need for the sights... For true back-up sights I prefer the YHM front sight and one of the GG&G "MADD" rear sights... T.

July 18, 2016, 08:54 AM	#7
candr44 Senior Member Join Date: February 11, 2006 Posts: 481	If you buy the Magpul plastic sights, make sure you are not getting cheap Chinese knockoffs. The Chinese made sights look just like Magpul but the quality is very poor. The springs are weak and the tolerances are loose to the point of being useless. Magpul also makes a MBUS Pro series that are all metal. I have a set that works well on my AR.

July 18, 2016, 09:42 AM	#8
imp Senior Member Join Date: November 11, 2006 Posts: 626	I like Troy and YHM. I don't think you'd go wrong with either brand.

July 18, 2016, 10:36 AM	#9
Screwball Senior Member Join Date: May 16, 2012 Location: ME Posts: 771	I have MBUS on my .45 AR, and MBUS Pros (standard ones) on my 5.56mm. The .45 is D/I, with a free floated barrel... so no heat issues where they are installed. My 5.56mm is a Spikes upper with an AA piston kit. That gas block does get hot, so opted for the metal. Between the two, I like the Pro profile. But not everyone wants to invest that much on a backup iron sight.

July 19, 2016, 10:27 PM	#10
swede4198 Junior Member Join Date: August 2, 2008 Posts: 14	I like the Troy diopter sights as my old eyes work better with a diamond rear aperture compared to the normal round one.

July 28, 2016, 06:54 PM	#12
Old Bill Dibble Senior Member Join Date: July 25, 2016 Posts: 802	MAGPUL MBUS pro metal if you hate the standard MBUS.

July 30, 2016, 06:58 PM	#14
Pacman Member Join Date: March 12, 2012 Location: Maryland Posts: 53	If you are mounting the front sight on the gas block, be aware that the MBUS is made of plastic and will melt. Yankee Hill would be my go to.

July 30, 2016, 07:02 PM	#15
armedleo Senior Member Join Date: July 5, 2015 Posts: 265	Go with Magpul for all the reasons stated above.

July 30, 2016, 09:28 PM	#16
PPQ226guy Senior Member Join Date: February 4, 2012 Location: Alabama Posts: 101	Troy or LMT

July 30, 2016, 10:19 PM	#17
stangbangr Member Join Date: March 8, 2011 Posts: 92	I have YHM, MBUS (rear only), MBUS PRO and Troy (rear only). Once they're zeroed I never use them so I don't have much of a preference one way or another. If I buy another set it'll probably be YHM though.

July 30, 2016, 10:29 PM	#18
orsogato Senior Member Join Date: July 20, 1999 Location: Steeler Country Posts: 628	Troy Industries. Hands down.

July 31, 2016, 10:47 AM	#20
HughScot Senior Member Join Date: July 4, 2016 Location: Charlotte, NC Posts: 166	After looking at the Troy Industries Di-optic aperture folding rear sight I would say if you are seriously interested in long range accuracy this sight looks great. I would really like to try it out. Of course it's expense.

July 31, 2016, 11:17 AM	#21
marine6680 Senior Member Join Date: July 24, 2012 Location: Parker, CO Posts: 4,594	The MBUS sights (real ones) are tougher than most people realize. But they are a bit bulky due to the polymer construction, and that affects the sight picture. They are perfectly serviceable as backup sights, to a quality red dot. As they will be used little... I do really like the MBUS Pros, as they are small/trim, metal and still reasonable in price. On sale a set is around $125. There are some very nice folding sights out there, but for a sight I will use very little, they tend to cost too much, especially when compared to other sights that work well and at a lower price.

August 1, 2016, 07:47 AM	#23
odugrad Senior Member Join Date: March 13, 2013 Location: The East Coast Posts: 477	Troy. No need to look anywhere else.

August 1, 2016, 07:55 AM	#24
Dirty_Harry Senior Member Join Date: January 11, 2006 Location: Kalamazoo, MI Posts: 1,484	Not a fan of plastic sights, though the magpuls seem to work. Another vot for Troy's. __________________ "The only purpose for a pistol is to fight your way back to the rifle you never should have laid down." "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them." -John Wayne

August 1, 2016, 07:56 AM	#25
MagnumWill Senior Member Join Date: March 18, 2009 Location: Central Colorado Posts: 1,001	I own both MBUS and Troy diopter sights. Troy is much more expensive, but worth it. Buy once, cry once. Don't forget a set of MBUS are still kind of expensive for plastic (sorry, "polymer" ) sights, so it may make sense to throw down the extra $40 and get good metal Troy sights. __________________ Those who hammer their swords into plow shares will plow for those who didn't...