The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old March 12, 2013, 12:31 PM   #1
Beentown71
Senior Member
 
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
Favorite Universal Clays 9mm load?

Just as the title indicates...what is your favorite 9mm load using Universal Clays and jacketed hp's (BERRY'S 124gr)?
Beentown71 is offline  
Old March 12, 2013, 02:53 PM   #2
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
Dang. Clicked on this topic but apparently, my 125gr LRN pushed by Universal load need not apply.

I run thousands of these each season.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old March 12, 2013, 02:55 PM   #3
Sure shot wv
Senior Member
 
Join Date: January 25, 2013
Location: West Virginia
Posts: 137
Berrys bullets are not jacketed as an FYI. They plated like rainier bullets as well. I can't help ya on the powder because I use autocomp,700x,and wsf in 9mm. I am a big fan of Berrys bullets though!!
Sure shot wv is offline  
Old March 12, 2013, 09:19 PM   #4
Beentown71
Senior Member
 
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
Quote:
Dang. Clicked on this topic but apparently, my 125gr LRN pushed by Universal load need not apply.
Would like to know what yours is for a starting point for me. Probably just going to run a few and build from there.

I was going to go with:

4.3 grains of Universal, 1.142 OAL, crimped at .378
__________________
Μολὼν λάβε

Time for the Mall Ninja list:
Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink
Beentown71 is offline  
Old March 12, 2013, 09:38 PM   #5
bossman
Senior Member
 
Join Date: November 16, 2010
Location: Arkansas
Posts: 996
I use the Berry's 124 gr hollow base with 4.4 grains of Universal at 1.12 col. Chronoed around 1100 fps. Very accurate round. I'm going to try 4.2 next time as the 4.4 launchs my brass into the tall grass.
__________________
NRA life member

When the going gets tough, I just open another beer.
bossman is offline  
Old March 13, 2013, 04:16 AM   #6
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
I'm running a Dardas 125gr LRN with 4.5gr Universal loaded to 1.140" COAL.

In my Witness Elite Match with 4.75" barrel, they run a spicy 1,180 FPS average through the chrono.

http://www.dardascastbullets.com/
...is where I get these bullets. Great slugs, great folks to deal with.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old March 13, 2013, 10:10 AM   #7
Beentown71
Senior Member
 
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
Re: Favorite Universal Clays 9mm load?

Thanks all.
Beentown71 is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05146 seconds with 10 queries