|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
February 25, 2014, 06:00 PM | #1 |
Senior Member
Join Date: February 21, 2014
Posts: 314
|
wrong primer size on factory brass?
I buy once fired brass from a friend of mine for my .45 acp. The other day i got 500 brass from him. After cleaning and sizing i was cleaning the primer pockets and found that 150 of them were federal casses and had a small primer pocket? I have never ran into this before.
I shoot 5.5gr of unique under a 230gr lead bullet. Can these casses be reloaded? If so can i just use a small pislol primer and load as normal? |
February 25, 2014, 06:06 PM | #2 |
Senior Member
Join Date: April 23, 2006
Location: South Texas
Posts: 2,010
|
Yep. A search of this site will provide several discussions.
|
February 25, 2014, 10:19 PM | #3 |
Senior Member
Join Date: February 21, 2014
Posts: 314
|
Thanks hodaka i did look a bit before i asked but aparently wasnt useing the right keywords. It took a few times but i found what i was looking for.
|
Thread Tools | Search this Thread |
|
|