October 21, 2009, 02:20 PM | #1 |
Junior Member
Join Date: October 21, 2009
Posts: 1
|
Benelli Nova Problems
Hey all,
my friends recently brought me a benelli nova that was jammed. to make a long story short i stripped the gun down only to discover that the roll pin that holds the ejector plate and spring in the receiver had fallen out. i put the spring and plate back in and when i went to put the pin in and just the spring pressure would push it back out. so i was wondering first off if this is a common problem, and wat do i do to fix it? am i just not driving the pin in far enough or wat? haha any help or input is greatly appreciated |
October 21, 2009, 06:48 PM | #2 |
Senior Member
Join Date: September 11, 2009
Location: Florida
Posts: 3,198
|
I don't have any tech info or knoledge about these guns to add in. But a friend bought one and at the range it was a jam-omatic.
|
October 22, 2009, 06:01 AM | #3 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
nova
Hmmm. I've had one for a couple of years - no problems. No jams. Different experiences, I guess.
About the roll pin - I'll take a look at mine, though I'm away from home now. If there is no other response, I'll post what I find if it will help. Won't be until tomorrow. Pete
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ... NRA Life Member |
October 22, 2009, 07:54 AM | #4 |
Junior Member
Join Date: August 25, 2009
Posts: 2
|
There is a release on the bottom of the forearm so you can remove a round without cycling in another round. If you accidently press that release while cycling, you can cause all sorts of problems.
|
Thread Tools | Search this Thread |
|
|