May 20, 2010, 06:44 PM | #1 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
Winchester Model 37 Parts
I just picked up a Model 37 in 16 gauge and it's in very good shape for and old single shot.
I went to Numrich to get some missing/needs replaced parts and found everything but one. I would like to find a Forend Escutcheon. If anyone has one or knows where to get one, please let me know.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
May 20, 2010, 11:13 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Jack First Guns
www.jackfirstgun.com
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
May 21, 2010, 08:54 AM | #3 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
Thank You, Scorch. I'll call them this morning.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
May 21, 2010, 11:09 AM | #4 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
OK, Jack First Guns did not have it nor did they have a supplier for it.
So, the call is still out for a Winchester Model 37 Forend Escutcheon.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
May 24, 2010, 08:26 AM | #5 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
No one has another source I can try? Darn the bad luck!
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
May 24, 2010, 10:39 AM | #6 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Just about anyone with a lathe can make one for you. A gunsmith, a community college student, etc. Measure the diameter of the screw that goes through it, the depth and diameter of the screw head, measure the depth and diameter of the hole it goes into, and give them those dimensions and wait 5 minutes. It's just a metal liner for the hole so the hole won't get wallowed out by the screw.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
Thread Tools | Search this Thread |
|
|