|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 25, 2013, 06:00 AM | #1 |
Senior Member
Join Date: May 16, 2009
Posts: 115
|
Cleaning rod preferences/experience?
I would like some comments on cleaning rod preferences and experiences, both pros and cons. I have been using Parker-Hale rods for decades and recently acquired a Dewey in .22. The Dewey quickly began to flake off the plastic? coating and now there is a bare metal section just to the rear of the jag. The Parker-Hale design has withstood countless cleaning sessions with no significant deterioration. The Dewey rod with its black coating makes it impossible to see accumulating debris during multiple swipes with a brush. The pale yellow or gray PH rods make dirty solvent easily detected. Anybody recommend other brands of cleaning rods?? With pros and cons.
Thanks for comments in advance! |
August 25, 2013, 06:24 AM | #2 |
Senior Member
Join Date: February 11, 2007
Location: S. Florida
Posts: 280
|
Cleaning rod preferences/experience?
My newest rod is a Birchwood Casey that's probably 10 years old; the others I use are unmarked and over 40 years old...all of them are holding up fine though.
|
August 25, 2013, 07:04 AM | #3 |
Senior Member
Join Date: October 28, 2006
Location: South Central Michigan...near
Posts: 6,501
|
I have made several of my own using drill rod which is annealed tool steel, to avoid using aluminum rods (aluminum + oxygen = aluminum oxide, an abrasive used in sandpaper.) The drill rods come in 36" lengths. The handles can be made by epoxying file tang handles on them. You need a lathe though, to drill and tap a hole for standard brass brushes and slotted tips, and other accessories.
Some folks are of the opinion that coated rods can/will become embedded with hard particles that will abrade the barrel. Last edited by dahermit; August 25, 2013 at 08:25 AM. |
August 25, 2013, 08:03 AM | #4 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,843
|
One piece coated Dewey rod for precision equipment.
Outers sectional brass rod for home cleaning. Solid one piece brass range rods for muzzle loading. Bore snake for field (compact and light).
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
August 25, 2013, 05:59 PM | #5 |
Senior Member
Join Date: May 4, 2001
Posts: 7,478
|
The coated rods are falling out of favor because of the shaving and flaking problem.
Most shooters today are using one-piece bare hardened stainless steel rods or the new carbon fiber rods. Dewey stainless is about as good as it gets. |
August 27, 2013, 06:12 AM | #6 |
Senior Member
Join Date: February 15, 2009
Posts: 8,927
|
If one uses a proper cleaning rod guide in the receiver, coated rods will not have their coating scraped off. A "must" thing to do with rimfire 22's if one wants to maintain their barrel quality. Guides help with centerfire rifles, too.
Bare metal cleaning rods made with stuff softer than stainless steel allow abrasive grit to get imbedded in them; that wears away barrel steel. Such metals include aluminum and brass. |
Tags |
rhb |
|
|