The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old August 30, 2009, 04:39 PM   #1
cpermd
Member
 
Join Date: March 4, 2001
Posts: 36
I need a 10mm 220 gr load

I need a load for pig hunting.
This is a very hardcast plated boolit from thebulletworks.net.
Needs to be 1025 FPS to use through a 5.6" suppressed Delta.

CP
cpermd is offline  
Old August 30, 2009, 05:11 PM   #2
RidgwayCO
Senior Member
 
Join Date: March 22, 2008
Location: Western Colorado
Posts: 244
The Accurate Reloading Manual #2 doesn't have any 220gr bullet data, but if you started a grain or so below its start load for the Hornady 200gr HP/XTP, you could probably work up a safe load using either #7 or #9. QuickLOAD confirms these two powders are probably your best choices considering the limited case capacity available when working with a 220gr bullet and a COL of only 1.260".

The downloadable Accurate Reloading Guide v3.3 is available here:

http://www.accuratepowder.com/data/A...%20version.pdf
__________________
"A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed." Nope, not a single word about hunting...
RidgwayCO is offline  
Old August 30, 2009, 05:13 PM   #3
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 21,057
Try starting with about 5.5 grains of Alliant Power Pistol, and gradually work up about another grain. That should be in the ballpark.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.04284 seconds with 10 queries