|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 30, 2013, 07:05 AM | #1 |
Member
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
|
Substituting Primers - Winchester for Remington
This has been asked before, but not in quite this way; and I want to be SURE.
I follow my Lyman Reloading Manual fairly religiously. I'm somewhat new to reloading , but not a total novice. I've been doing it for about 2 years, but only when the mood strikes me. So, because of supply issues and tight finances, I've started using what I have in my "stock". I am currently working on loading 270 win, 7mm rem mag and 9mm luger. I have all three successfully blowing projectiles down range without injury to my self, my neighbors at the range and my firearm. So, that's a big freakin plus! Also, I've been staying on the low end of the charge.. NOT working to max loads so far. For example, for 7mm rem mag, I have been using Remington 9 1/2 Large Magnum Rifle primers. I have several trays of Winchester WLRM, CCI 250 Magnum Primers, Federal no 215. I want to be as sure as I can that it is ok to use these AS LONG AS IM STARTING ON THE LOW END of the range, that is, the "Suggested STarting Grains"... I've read that different manufacturer's primers have different characteristics, but I believe that I'm safe as long as I stay on the low end and work up. What say you folks? Thanks in advance, Pat
__________________
”You cannot invade the mainland United States. There would be a rifle behind each blade of grass.” ~Admiral Isoroku Yamamoto "DUMP HICKENLOOPER".. my soon to come bumper sticker. |
March 30, 2013, 07:27 AM | #2 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
The reason there are starting loads is because of variation in components and firearms. I've never paid the slightest attention to the brand of brass or primers listed in the data.
|
March 30, 2013, 08:10 AM | #3 |
Member
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
|
Thank you. That's a valuable confirmation.
__________________
”You cannot invade the mainland United States. There would be a rifle behind each blade of grass.” ~Admiral Isoroku Yamamoto "DUMP HICKENLOOPER".. my soon to come bumper sticker. |
March 30, 2013, 08:26 AM | #4 | |
Senior Member
Join Date: February 9, 2011
Location: Just outside Cleveland, Ohio
Posts: 722
|
Quote:
I believe you are 100% correct, as long as you start low and work up you are safe.
__________________
The private ownership of firearms is an American Heritage. Anyone who disputes that is Anti-American and unpatriotic. NRA Life Member |
|
March 30, 2013, 08:34 AM | #5 |
Junior Member
Join Date: March 27, 2013
Posts: 6
|
Re: Substituting Primers - Winchester for Remington
I completely ignore the primer part of the load data. That's just the publisher telling you what they used to work up the powder charge. I don't think it is anywhere near critical
|
March 30, 2013, 08:39 AM | #6 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
Primers are not a problem at the starting charge in my experience.
Jimro
__________________
Machine guns are awesome until you have to carry one. |
Thread Tools | Search this Thread |
|
|