|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 27, 2013, 08:09 PM | #51 |
Senior Member
Join Date: July 3, 2005
Location: Alabama
Posts: 925
|
Be sure to post pictures.
I might need the 50-70 extractor. I hope Al still has it when my rifle arrives. TK |
March 29, 2013, 11:30 AM | #52 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Put together
Here are some photos of the rifle with all of the components present.
I don't have the screws yet so the sight was just sitting on the barrel. Sorry the muzzle is out of focus. A photographer I am NOT. I will be dovetailing the front sight.
__________________
Seek truth. Relax. Take a breath. |
March 29, 2013, 11:34 AM | #53 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Minor issue
Both of my trapdoors have a good bit of trigger creep and I suspect it is not uncommon in the marque.
I solved the problem in the one I am building by layering heat shrink tubing onto the sear. This got creep down to about a sixteenth inch where the finger bears. This is a three position tumbler and I want the trigger to be right. If the tubing lasts, I will do the same thing on my other one.
__________________
Seek truth. Relax. Take a breath. |
March 29, 2013, 11:41 AM | #54 |
Senior Member
Join Date: November 18, 2010
Location: Orygun
Posts: 868
|
When my tumbler broke the replacement was a two position one. It was OK but just different. Basically a 1/4 cock and full cock. You can load & unload on 1/4 cock.
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball. SASS#3302 (Life), SASS Regulator, NRA (Life), Dirty Gamey Bastards #129 Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell) |
March 29, 2013, 11:55 AM | #55 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Looking good Doc but that's a rifle butt plate.
|
March 29, 2013, 01:38 PM | #56 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Hawg...
Yeah I know. But if you don't say nuthin, I won't.
__________________
Seek truth. Relax. Take a breath. |
March 29, 2013, 06:39 PM | #57 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Quote:
|
|
March 29, 2013, 08:45 PM | #58 |
Senior Member
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
|
I like it already! (heck, I liked it from the first pic of just the barrel ) Shes a real looker Doc I cant wait to see the final product
|
March 29, 2013, 09:26 PM | #59 |
Senior Member
Join Date: July 3, 2005
Location: Alabama
Posts: 925
|
It's looking real nice! I'm so jealous!
TK |
March 31, 2013, 12:07 PM | #60 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Dovetailing the front sight
I made this sight and now I am afraid it might be too short.
Clamping this to the milling machine table was a bear. I had to be SOOO careful to get the alignment right. I cold blued the barrel, and receiver to try to get them to match. Only just so successful. I might try that again. Here is the closeup of the sight.
__________________
Seek truth. Relax. Take a breath. |
March 31, 2013, 12:10 PM | #61 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
I popped a cap yesterday...
Goes off fine, but I am afraid the firing pin is too long.
Pretty big dent in the primer. Don't reckon it matters all that much. I have all of the screws coming from Al Frasca's running mate, Ed Knisely. I am going to try to make the saddle ring rail. Might be shooting this thing next week.
__________________
Seek truth. Relax. Take a breath. |
March 31, 2013, 12:30 PM | #62 |
Senior Member
Join Date: November 25, 2012
Location: Eaton Rapids, MI
Posts: 445
|
Outstanding!
Thanks for sharing Doc!!!
Birch
__________________
Black Powder: Not because it is easy, but because it is hard, because that goal will serve to organize and measure the best of our energies and skills, because that challenge is one that we are willing to accept, one we are unwilling to postpone, and one which we intend to win... |
March 31, 2013, 12:36 PM | #63 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Total for parts
$533.00.
__________________
Seek truth. Relax. Take a breath. |
March 31, 2013, 07:57 PM | #64 |
Senior Member
Join Date: December 10, 2012
Location: Wichita, KS
Posts: 158
|
Re: I love my trapdoor so much....
This is really cool. Looks like a lot of fun
|
April 4, 2013, 10:09 AM | #65 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
You got it, Mr. McN.
This is the most fun I have had with my clothes on in a long time.
Been away on travel for a coupla days and am just getting back to the forum. I have decided on a minimalist approach to th final finish on the rifle. Maybe just brown the rifle and take the shine off of the stock.
__________________
Seek truth. Relax. Take a breath. |
April 4, 2013, 11:19 AM | #66 |
Senior Member
Join Date: December 10, 2012
Location: Wichita, KS
Posts: 158
|
I would keep it simple too. Browning the barrel would give it more character than a shiny finish I would think. It really is awesome, you should be proud of it.
|
April 4, 2013, 07:07 PM | #67 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Brown is good and I think the stock looks good as is.
|
April 4, 2013, 07:37 PM | #68 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
need a good lead
on some browning processes.
I see the links to Brownells, but is that the best option?
__________________
Seek truth. Relax. Take a breath. |
April 4, 2013, 08:59 PM | #69 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Browning....
I've used two different processes, both successfully. Each has it's own 'tricks'.
1) Birchwood Casey Plum Brown. This is a hot process; you heat the metal and apply the browning solution with a large cotton swab. The key is to thoroughly clean and degrease the metal first. This makes handling the parts an issue; nitrile gloves are the solution. Two to four coats are usually necessary. The first one will appear uneven but that's quickly and easily fixed with the following coats. Also, if one of the coats is uneven, due to the metal cooling too fast, fixing it by applying another coat is easy and effective. Pros of this method are speed (you can apply several coats in one day) and control (each coat gives a darker and smoother finish and you can quickly judge whether to add another). Plus you don't need to plug the bore because the interior of the barrel doesn't get hot enough to react with the solution if any should get inside. Cons are the need to keep the metal clean and degreased, so plan how to handle the parts in advance. 2) Laurel Mountain Browning and Degreaser Solution. This is a cold process; you create a high humidity environment and apply the solution, then let it rust for several hours. The parts are then 'carded' with a stiff brush or denim cloth to remove the scale. Several coats are necessary and it will take a couple of days to complete one gun. Warning: the first coat or two will look terrible, but each subsequent coat will get better. Pros are the humid environment is easy to set up (I just turned on a hot shower and closed the bathroom door) and the solution is itself a degreaser, so keeping the parts clean and grease free is not as important. Cons are the time invested - it takes much longer than the hot process. Also, you will need to plug the muzzle and nipple/touch holes to keep from rusting the bore. Both will give a deep, smooth brown finish, and both can be tailored to produce the amount of 'antique' that one desires. |
April 5, 2013, 07:00 AM | #70 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Mykeal....
Thanks for the tips.
Using Plum Brown... Does the surface to be browned need to be completely free of previous bluing? Does the process produce a markedly different appearance when applied to case hardened parts?
__________________
Seek truth. Relax. Take a breath. |
April 5, 2013, 07:13 AM | #71 |
Senior Member
Join Date: May 12, 2002
Location: MO
Posts: 5,453
|
Splendid thread, Doc.
__________________
People were smarter before the Internet, or imbeciles were harder to notice. |
April 5, 2013, 07:37 AM | #72 | ||
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Quote:
Quote:
|
||
April 5, 2013, 10:14 PM | #73 |
Senior Member
Join Date: September 21, 2012
Posts: 144
|
Beautiful work, Doc, and I applaud your decision on the minimalist touch. You are building both a historical and interesting piece. Can't wait to see the finished product!
__________________
"You gonna pull those pistols, or whistle Dixie?" |
April 6, 2013, 05:26 AM | #74 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Mykeal, Capt, and Sarge
Capt and Sarge,
Thanks for the compliments Mykeal, Thanks for the info. The 1873 Peacemaker clone that I have from Geroco is browned. I have to put more thought into this decision.
__________________
Seek truth. Relax. Take a breath. |
April 6, 2013, 01:01 PM | #75 |
Senior Member
Join Date: May 12, 2011
Location: New Mexico
Posts: 1,315
|
So I'm in the LGS and what to my wondering eyes.. It's the full length infantry rifle by Pedersoli. Now it looks too long, after seeing yours. I hope your piece shoots as good as it looks. Putting the saddle ring rail on will really take the cake!
|
Thread Tools | Search this Thread |
|
|