|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 24, 2012, 01:03 PM | #1 |
Junior Member
Join Date: July 21, 2010
Location: Wellington, New Zealand
Posts: 5
|
Millett 100 - missing parts
Hi folks, hope someone can point me in the right direction...
I recently bought a shooter 586 with the silhouette front sight. It has a Millet 100 rear sight. This gun groups nicely - but all @5" to the right of the POA. I couldn't make an adjustment to windage that made it change! So, I pulled the sight down and it's missing the circlip that holds the windage screw in place (can probably find a replacement easily enough) and both m-springs. Millett say they have no parts for their iron sights any longer. Any advice would be appreciated. Evan |
January 24, 2012, 07:37 PM | #2 |
Senior Member
Join Date: December 1, 2011
Posts: 108
|
The circlips are available from any auto parts store or well stocked hardware store.
|
February 1, 2012, 06:38 PM | #3 |
Junior Member
Join Date: July 21, 2010
Location: Wellington, New Zealand
Posts: 5
|
Millett 100 parts
thanks Fleet, the circlips are sorted... The m-springs are more difficult. Does anyone know if they really affect accuracy? Can I do without them?
|
April 11, 2012, 01:47 PM | #4 |
Member
Join Date: October 28, 2005
Location: Washington, WV
Posts: 42
|
Mine do OK without the M springs.
Does anyone know where I can get a windage screw?? I broke the end where the clip goes off of one. |
Thread Tools | Search this Thread |
|
|