Cz-75a

**4V50 Gary** · October 5, 2002, 11:11 AM

Harley,

Do you have instructions for detailed stripping of this gun? Thanks,

Gary

Walt Sherrill · October 5, 2002, 11:28 AM

The gun is pretty straight-forward and the only tricky part I've found has to do with the safety. (Another shooter on THIS forum tipped me off and gave instructions.)

There is a small coiled spring inside the safety lever on the gun, and if you get that accidentally apart, there's he** to pay getting it back together.

Using a paper clip or small piece of wire insert the end of the clip/wire into the small hole on the safety, and move it around until it engages a second hole/detent inside the unit.

You can then remove the safety without problem.

You'll want to be sure the pin stays in place while the safety is set aside (as you diassemble the rest of the gun).

October 5, 2002, 11:11 AM	#1
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 21,831	Cz-75a Harley, Do you have instructions for detailed stripping of this gun? Thanks, Gary __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

October 5, 2002, 11:28 AM	#2
Walt Sherrill Senior Member Join Date: February 15, 1999 Location: Winston-Salem, NC USA Posts: 6,348	The gun is pretty straight-forward and the only tricky part I've found has to do with the safety. (Another shooter on THIS forum tipped me off and gave instructions.) There is a small coiled spring inside the safety lever on the gun, and if you get that accidentally apart, there's he** to pay getting it back together. Using a paper clip or small piece of wire insert the end of the clip/wire into the small hole on the safety, and move it around until it engages a second hole/detent inside the unit. You can then remove the safety without problem. You'll want to be sure the pin stays in place while the safety is set aside (as you diassemble the rest of the gun).