|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 1, 2012, 01:30 PM | #1 |
Senior Member
Join Date: February 23, 2010
Location: Oklahoma
Posts: 185
|
Need another source for 6.5mm Rem Mag brass
Does anyone know where else that I can locate some 6.5MM Remington Mag brass? I usually got it from Huntington, but just called them and they are out and Remington has told them they will not be making anymore!
I just looked at Graf and they are "out of stock". That was my only two sources. |
February 1, 2012, 02:02 PM | #2 |
Senior Member
Join Date: April 4, 1999
Location: New Mexico
Posts: 1,889
|
I cannot answer the question, but just yesterday I was looking at the M 660 in 6 MM Rem I gave my son in 1971.
When I bought it a friend who had an "in" with Simmons in Olathe KS, and I went to the store, and they let us go to the warehouse and pick out the one I wanted. The price was wholesale minus 10% to my friend. I cannot figure out why I was so dumb as not to buy a 6.5 Rem Mag. and a .350 Rem Mag. If the 6.5 was as accurate as the 6 MM, easy mos, it would be a great rifle to lug in the mountains, and the performance should not be far from a .270. I do not like 20" barrels, but still wish I had bought one. As it turns out I was wondering about the availability of brass. I usually buy 200 - 300 cases with a new rifle. How do you like it, have you chronographed the loads, and how is the accuracy? Thanks, Jerry
__________________
Ecclesiastes 12:13 ¶Let us hear the conclusion of the whole matter: Fear God, and keep his commandments: for this is the whole duty of man. 14 For God shall bring every work into judgment, with every secret thing, whether it be good, or whether it be evil. |
February 1, 2012, 02:14 PM | #3 |
Senior Member
Join Date: February 23, 2010
Location: Oklahoma
Posts: 185
|
I actually really love the rifle. Although, as you stated, it is short barrel length, it has been very accurate with my handloads.
I got it last year from a guy that bought it and could not find factory ammo for it. Since I could not bear to pay the exorbant factory load cost and already handload, I just bought 500 new cases last year. I have worked up two separate loads for it, with exactly the same poa & poi @ 200 yards, one is 100gr Nosler BT and the other is 130gr Nosler Accubond, with different powders behind each one. So, since I was going through the brass and figured I might as well order some more to have it for the point of having it, I found out there is no more and now I am frustrated with myself for not buying more last year. I have 100 that are still new, all the rest are once fired, so, I am not in a pickle yet..... |
February 1, 2012, 03:51 PM | #4 |
Senior Member
Join Date: December 11, 2009
Location: Northern California
Posts: 1,766
|
You might be in trouble, Remington is not even listing them on their website!
|
February 1, 2012, 04:04 PM | #5 |
Senior Member
Join Date: April 4, 1999
Location: New Mexico
Posts: 1,889
|
Thanks, golfballshootr,
The Rem 660 seems to be an accurate rifle. Again, I wish I had bought one, but my hunting days are over so guess I would just enjoy looking at it now. Not sure how much I would have used it instead of my Win Pre 64 Fwt .270. Hope you can come up with some brass that has been tucked away for years, and is not too costly. Jerry
__________________
Ecclesiastes 12:13 ¶Let us hear the conclusion of the whole matter: Fear God, and keep his commandments: for this is the whole duty of man. 14 For God shall bring every work into judgment, with every secret thing, whether it be good, or whether it be evil. |
February 1, 2012, 07:32 PM | #6 |
Senior Member
Join Date: July 1, 2007
Location: texas
Posts: 997
|
pm me. I have a number of 20 round boxes of never used Remington brass that I bought well over 20 years ago.
|
February 2, 2012, 07:36 AM | #7 |
Senior Member
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
|
I seen on Midways site the 6.5 mag brass was a "seasonal" run. I purchased 150 pieces last year. Only using about 20 at a time.
On a side note, I witnessed very poor performance from the Accubonds with a starting load. But, my 673 loves the Barnes bullets |
February 2, 2012, 09:05 AM | #8 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
As long as the .350 is still in production you can make your own 6.5 Mag. brass.
Requires multiple steps and neck reaming, but it's better than paying the price for obsolete brass.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
February 3, 2012, 01:03 PM | #9 |
Senior Member
Join Date: January 24, 2011
Posts: 1,427
|
If a run from Remington is not forthcoming there are three options that I know of.
1. Using another magnum brass as your pallet, reform your own. You can neck down 350 Rem. or cut the neck off of a 264 / 300 Win. or 7mm Rem. Mag and start from there. It will be some work to do but it is doable. 2. Contact an outfit like Quality Cartridge and pay the price for them to make you some. If you go this route; you might want to look for some other people who will go in with you for a larger run to reduce the per piece price. IO have no idea what their minimum run is but it doesn't hurt to contact them and find out all of the particulars. Who knows, they may have a run planned in the not to distant future and you could get in on it. 3. Scan the Gunbroker and related sites until you find some out there from a private party. This option is the "you roll the dice; you take your chances" option. |
February 3, 2012, 01:15 PM | #10 |
Senior Member
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
|
|
February 20, 2012, 01:32 PM | #11 |
Member
Join Date: March 8, 2009
Location: terlton, oklahoma
Posts: 93
|
Mid way has them $77.00 per 100
|
February 20, 2012, 01:34 PM | #12 |
Senior Member
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
|
Out of stock, seasonal run
|
February 20, 2012, 03:19 PM | #13 |
Senior Member
Join Date: January 20, 2010
Location: Central Arkansas
Posts: 1,074
|
80 rounds of factory primed Remington 6.5 mag brass available on Gunbroker, item #274582282. This is older old stock dates from 60's or 70's, the brass should be fine, I don'dt think I would trust the primers . William
|
March 15, 2012, 04:54 PM | #14 |
Member
Join Date: March 8, 2009
Location: terlton, oklahoma
Posts: 93
|
6.5 rm brass
How about we get all the people that needs brass to sign a draft and send it to Remington to let them know we need brass and they should suport all of us that bought thier rifles in 6.5 & 350 mag.
there is guys all over the net looking for this brass. If they don't I will not buy another Remington product. |
December 31, 2012, 10:51 PM | #15 |
Senior Member
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
|
Bringing this back up. Remington has "discontinued" their 6.5 mag brass
Anyone have a heads up? I felt it better BTW to bring an older thread back rather than creating a new one and wasting bandwidth......if y'all worry about that on this forum. |
January 1, 2013, 12:54 AM | #16 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
__________________
Machine guns are awesome until you have to carry one. |
January 1, 2013, 11:11 AM | #17 |
Senior Member
Join Date: February 21, 2011
Location: way out here
Posts: 262
|
I have 160 pieces of 6.5 Mag. brass, R_P, which I would sell, shipped to the lower 48, for $75. It has been decapped and cleaned, but not sized. For another $10, I would anneal it. ( http://www.6mmbr.com/annealing.html)
|
January 1, 2013, 09:43 PM | #18 |
Member
Join Date: November 28, 2012
Location: Eastern SC
Posts: 68
|
forming 6.5 Rem. Mag. Brass
From The Handloaders Manual of Cartridge Conversions by Donnelly: Use 300 H&H brass, run H&H case into 6.5 Rem. die. You may have to anneal. Trim to length. Chamfer. F/L Size.
|
January 1, 2013, 09:44 PM | #19 |
Member
Join Date: November 28, 2012
Location: Eastern SC
Posts: 68
|
Forming 6.5 Rem. Mag. Brass
From The Handloaders Manual of Cartridge Conversions by Donnelly: Use
.300 H&H brass, run H&H case into 6.5 Rem. die. You may have to anneal. Trim to length. Chamfer. F/L Size. |
January 1, 2013, 09:49 PM | #20 |
Senior Member
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
|
From The Handloaders Manual of Cartridge Conversions by Donnelly: Use
.300 H&H brass, run H&H case into 6.5 Rem. die. You may have to anneal. Trim to length. Chamfer. F/L Size. Case forming die?.....and then trim/ chamfer..fl size? |
January 1, 2013, 10:10 PM | #21 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
you may have to anneal? No, you WILL have to anneal. Moving the shoulder back around 8mm and necking it down to 6.5mm?
That is why I suggested the 350 Rem brass, no need to move the shoulder, just size down and turn the necks if needed. Jimro
__________________
Machine guns are awesome until you have to carry one. |
October 17, 2013, 08:09 PM | #22 |
Junior Member
Join Date: October 14, 2013
Posts: 1
|
Thread reseration
I realize this thread is pretty old but I looking for cracks in the wall I ran into trying to find brass. Is it possible to run 350 brass straight into a 6.5 reloading die or do I need a special die. Or is it possible to run it through a series of dies and neck it down in stages. I have never tried to reform a case before but for the 6.5 it doesn't look like I have a choice.
|
October 17, 2013, 10:21 PM | #23 |
Senior Member
Join Date: December 10, 2012
Posts: 6,165
|
I just put back 1000 350 Rem mag pcs of brass for that same reason. Its a bit easier to find and you can neck it down if you get into too much trouble. You can also make it from 7Rem MAg, but its a slight bit of a pain.
|
October 18, 2013, 11:09 AM | #24 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
You should be able to run it straight into a 6.5 die. Remove the decapping stem during your initial forming pass, it makes things a little bit easier.
Make sure that your cases are well lubricated. You may have to neck turn the cases to ensure that you have proper chamber clearance.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
October 20, 2013, 09:37 AM | #25 |
Senior Member
Join Date: July 18, 2008
Posts: 7,249
|
Reloading is not fair, case forming is beyond unfair.
When I form brass the shoulder does not move, it is erased, the shoulder that is formed is ‘a new shoulder’ that was not there before I started and the old shoulder becomes something else, or it is cut off with the man tool, the hack saw. “All you gott-a do is etc., etc..” ? ? Fire forming? Same thing, most fire formers are pulling the trigger and making once fired cases, I know, there is the cool factor, “I went to the range today and fire formed my cases”, I have forming dies, I justified the cost because 30/06 cases were available for .01 cent each, 1,400 cases for $14.00. Then there were wildcats, cases did not exist, like taking advise when chambering a rifle I could not believe how much guess work was going on. Criteria: failure rate, I was asked to assist in forming cases for a wildcat chamber, the advise? “All you gotta do is...... “ , now a few would wonder why they ask me to get involved, the first tool they wanted me to bring was the other #4 Shell holder for the 300 H&H, 300 Weatherby, 375 etc., and 300 Winchester Magnum cases. Following their own advise all they managed was a big wad of brass at the case body/shoulder juncture, as a side note I was going to furnish the case lube, but, if Imperial sizing wax was not going to be used it was going to be Dillon in the bottle or can. No cool factor in saying “I do not use Imperial” or “I do not use Dillon etc..”. Like magic, no failures, in the process at any point we could have formed 350 Remington cases or 6.5 Remington mag cases without with ease and without failures. F. Guffey Last edited by F. Guffey; October 20, 2013 at 09:38 AM. Reason: add is |
|
|