August 3, 2012, 10:13 PM | #1 |
Junior Member
Join Date: August 3, 2012
Posts: 1
|
Baikal IZH-81KM 12 gauge
Hello everyone. I recently purchased a used Baikal IZH-81KM 12 gauge shotgun at a reduced rate because it didn't have a clip/magazine. I can't believe how hard it is to find a clip/magazine for this shotgun. I wasn't even able to get one from EAA Corp in FL who manufactured the shotgun because it's no longer being made.
Any ideas of where I might be able to pick up a few magazines for this shotgun? (or at least one) Thanks! |
August 5, 2012, 07:07 AM | #2 |
Junior Member
Join Date: August 5, 2012
Posts: 2
|
I have 2 that came with my gun when I purchased it. I would like to keep mine but I would really like to turn another one into a home defense gun. What would it take to get that gun from you.
|
August 5, 2012, 07:49 AM | #3 |
Senior Member
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
|
The IZh-81 has now been replaced by the MP-133, which appears to be the same design, only with a receiver made to accept up to 3 1/2" shells, and they do make a MP-133K version that feeds from the same sort of box magazine. You may need to write to Izhmech ( http://imzcorp.com/en/info/partners.html ) and see if either the magazines are interchangeable, or if they have any mags for the IZh-81 in stock.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936. |
August 6, 2012, 03:22 AM | #4 |
Junior member
Join Date: June 23, 2009
Location: Orange County, CA
Posts: 2,149
|
Check with Numrich.
Is it likely that a box magazine made to accept 3-1/2" shells will fit or be too large for a receiver with an opening designed to accomodate a 3" shot shell magazine. Measure the opening in your receiver. Try calling the US dealer located in Florida to check on the availability of magzines for the IZh-81. Or this outfit, which may have them for $80. http://www.gunbroker.com/Auction/Vie...Item=281833304 Last edited by TheKlawMan; August 6, 2012 at 03:43 AM. |
Thread Tools | Search this Thread |
|
|