|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 11, 2010, 07:56 AM | #1 |
Senior Member
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
|
suggstions if any, for touching up nickel guns...
short of completely re-nickeling a gun, is there anything out there ( similar to cold blue for a blued gun ) that could touch up unsightly "bad spots" on the gun ???
I can honestly live with little spots & such, but if a gun has fairly large spots of dark rust color on the gun, I find that pretty unsightly... even if there was a good way to put the area "in the white" & keep it oiled would look better...I have tried scrubbies & steel wool on to expiriement on some others in not as good a shape, but I end up with working the edges of the nickel too much, I wondering if there is a chemical that will strip the rust to white, without damaging the nickel next to it, & if there is anything that can be applied to the exposed steel, to help it remain as white as possible, maybe even almost match the surounding nickel ??? I have several guns in otherwise "good" condition including this H&R 32, & a 4th model S&W, & a Iver Johnson factory 32 snubbie, that could all "benefit" from lightening a fairly large dark spot or two as an example, I just bought this old 32 top break, the finish is in a pretty normal "good" condition the only objection I have to the finish, is the big spot on the right side of the barrel, pictured here... any suggestions ???
__________________
In life you either make dust or eat dust... Last edited by Magnum Wheel Man; February 11, 2010 at 08:06 AM. |
February 11, 2010, 08:57 AM | #2 |
Senior Member
Join Date: May 27, 2006
Location: Ozarks
Posts: 1,840
|
Nope. It is an expensive renickle, or live with it.
__________________
"A Liberal is someone who doesn't care what you do, as long as it's mandatory". - Charles Krauthammer |
February 11, 2010, 03:24 PM | #3 |
Senior Member
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
|
was looking at small spot bead blasters, & see Brownell's offers electroless nickel solutions & instructions... does / could the electroless nickel solution be used in a taped off area ??? anyone know how electroless nickel reacts to old non electroless nickel, if you were to butt them together ???
just an FYI, I'm not trying to repair the finish to resell the guns, just looking to diminsh the eye sore on guns I've determined I want to keep, & do not want to refinish perhaps spot blasting the rust spot to white, & just oiling well... or maybe even tactfull rattle can spotting anyone ever do electroless nickel, & try spot touch ups ???
__________________
In life you either make dust or eat dust... |
February 11, 2010, 07:57 PM | #4 |
Senior Member
Join Date: May 4, 2001
Posts: 7,478
|
Won't work.
Electroless nickel is usually a satin finish as normally applied, so it won't even come close to matching. You can't really mask off the entire gun except for the spots you want to coat either. Hard fact, once nickel is damaged, there's no fix other than a total re-finish. Probably, your best option is silver paint. Back when I was still building models, there were products that were used to simulate the bright aluminum of aircraft panels. You sprayed it on and let it dry, then polished it with a soft cloth. While it didn't shine like nickel, it was shinier than ordinary silver paint. Humbrol Metalcoat is one, Testor's Buffing Metalizer is another. There's also "Alclad" lacquer aluminum model paints. Check with Squadron Mail Order. They're a big model shop that carry everything: http://www.squadron.com/ Last edited by Dfariswheel; February 11, 2010 at 08:07 PM. |
February 11, 2010, 11:44 PM | #5 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
I once got a good deal on two old topbreak S&W's ($25 each) that had been originally nickel but were in bad shape. I had the remaining nickel removed electrically, polished the guns myself and had them blued. They look very good. To top things off, one had the old grips cracked, so I fitted modern (wood, silver medallion) J-frame grips trimmed down. (Incredibly, the grips fit the frame perfectly with the hole for the pin in the right place!)
It looks like a modern .38 Safety Model, if there were such a thing. http://www.thefiringline.com/forums/...5&d=1241579444 Jim Last edited by James K; February 11, 2010 at 11:51 PM. |
February 12, 2010, 07:27 AM | #6 |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
The electroless nickel is not intended for a spot refinish like that. One inexpensive way to improve the looks would be to dura coat or other firearm paint. That's what I did to this old nickle finish.
|
February 12, 2010, 08:39 AM | #7 |
Senior Member
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
|
thanks for the suggestions guys... I honestly don't know much about the electroless nickel process, & had hoped that it could be used for spot touch ups, even if that is not how it was intended to be used...if the process requires imersion for a period of time that could complicate things, add heat needed ???
__________________
In life you either make dust or eat dust... |
February 14, 2010, 08:30 AM | #8 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Quote:
|
|
February 15, 2010, 08:15 AM | #9 |
Senior Member
Join Date: August 30, 2009
Location: Northern AZ
Posts: 7,172
|
The rust is part of the history of the gun. Just leave it alone and keep the gun oiled so it doesn't rust any more.
|
|
|