|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 30, 2010, 05:18 PM | #1 |
Senior Member
Join Date: August 6, 2006
Location: Republic of Texas
Posts: 506
|
Lost my Redhawk pawl spring and plunger...
I got my cylinder back from Cylindersmith.com in 6 days time. Went to reinstall the trigger assy. and the pawl moved over and the spring and plunger came out. I was installing it and then one moment it was there and the next it had disappeared somewhere. Anyone know where a spring and plunger for a Redhawk can be located and purchased? I looked for hours even with a magnet and it has found that domestic black hole.
__________________
5.56mm, reach out and touch something. .458 SOCOM,reach out and knock something down. M70 Web Page |
January 30, 2010, 06:44 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
#57 & 58
In stock http://www.e-gunparts.com/products_new.asp?CatID=8352 FWIW, Numrich is the official Ruger parts distributor for North America.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
January 30, 2010, 06:52 PM | #3 |
Senior Member
Join Date: August 6, 2006
Location: Republic of Texas
Posts: 506
|
Thanks so much!
__________________
5.56mm, reach out and touch something. .458 SOCOM,reach out and knock something down. M70 Web Page |
February 8, 2010, 08:34 AM | #4 |
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,324
|
And www.brownells.com has them.
__________________
. "all my ammo is mostly retired factory ammo" |
February 8, 2010, 06:14 PM | #5 |
Senior Member
Join Date: August 6, 2006
Location: Republic of Texas
Posts: 506
|
Thanks guys, it is all back together again. I made the wifey watch those parts in case they flew again. All went well, no launches this time. Me a happy camper once more. With the cylinder reamed to .4525" and the barrel fire lapped I am good to go. Now there are more bullets for me to chose from and the large gun show here every month and a half or so has a vendor that sells bulk XTP Hornady 300's. .452" so now that is not a problem.
__________________
5.56mm, reach out and touch something. .458 SOCOM,reach out and knock something down. M70 Web Page |
February 11, 2010, 07:23 AM | #6 |
Junior member
Join Date: February 2, 2008
Posts: 3,150
|
Every time I have had a spring launch across the shop and disappear into a black hole within 24 hours of receiving a replacement and installing it I would stumble across the original part hiding behind something or in the back of a tool drawer. Murphy lives in my shop. I finally built a disassembly area with back and side walls to catch those little things. They can't hide now. Don't forget that eye protection.
|
February 13, 2010, 10:27 AM | #7 |
Member
Join Date: July 29, 2005
Location: Lancaster, Pa
Posts: 93
|
call ruger
call ruger for replacement they are fast
|
Thread Tools | Search this Thread |
|
|