Remington 700 vs. Winchester 670

codyb1991 · October 31, 2011, 11:42 PM

Just gathering information and opinions. IMO the 700 is optimal.

taylorce1 · November 1, 2011, 07:02 AM

Both actions are good and reliable. My question is for what is the Rem 700 optimal for? The closest comparison to the 670 in a Rem would be the M700 ADL. Both are push feed actions, both have blind internal magazines. After that it is all personal prefrence as to which rifle you like.

jmr40 · November 1, 2011, 11:51 AM

The 670 has a better extractor, bolts that don't fall off and it won't fire unless you pull the trigger. Other than that they are very comparable.

30-30remchester · November 1, 2011, 06:38 PM

Have to disagree with a few, as there are Many differences in the design and construction of the different models. Both are fine guns but of entire different makeup. The 700 is a round reciever aka pipe reciever. The recoil lug is simply a washer. The bolt is a 3 piece affair soldered togeather. The extractor is a small piece of bent tin that is actually far more reliable than its construction would lead you to believe.The trigger is quite complicated and troublesome. The magazine box is a piece of folded tin. The 670 is a poor mans model 70. Poorly finished. The reciever is milled from a billet of steel with a flat bottom and built in recoil lug. The trigger is simple and vitually foolproof. The extractor is larger and milled into the bolt. The bolt on the 670 is a 2 piece affair IIRC. Cant recall what the magazine box is like. Not saying one is better than the other though I do have my preferences.

October 31, 2011, 11:42 PM	#1
codyb1991 Member Join Date: September 24, 2011 Location: Hoquiam, WA Posts: 88	Remington 700 vs. Winchester 670 Just gathering information and opinions. IMO the 700 is optimal.

November 1, 2011, 07:02 AM	#2
taylorce1 Senior Member Join Date: November 18, 2005 Location: On the Santa Fe Trail Posts: 8,242	Both actions are good and reliable. My question is for what is the Rem 700 optimal for? The closest comparison to the 670 in a Rem would be the M700 ADL. Both are push feed actions, both have blind internal magazines. After that it is all personal prefrence as to which rifle you like. __________________ NRA Life Member

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

November 1, 2011, 11:51 AM	#3
jmr40 Senior Member Join Date: June 15, 2008 Location: Georgia Posts: 10,805	The 670 has a better extractor, bolts that don't fall off and it won't fire unless you pull the trigger. Other than that they are very comparable.

November 1, 2011, 06:38 PM	#4
30-30remchester Senior Member Join Date: April 18, 2009 Location: mountains of colorado Posts: 977	Have to disagree with a few, as there are Many differences in the design and construction of the different models. Both are fine guns but of entire different makeup. The 700 is a round reciever aka pipe reciever. The recoil lug is simply a washer. The bolt is a 3 piece affair soldered togeather. The extractor is a small piece of bent tin that is actually far more reliable than its construction would lead you to believe.The trigger is quite complicated and troublesome. The magazine box is a piece of folded tin. The 670 is a poor mans model 70. Poorly finished. The reciever is milled from a billet of steel with a flat bottom and built in recoil lug. The trigger is simple and vitually foolproof. The extractor is larger and milled into the bolt. The bolt on the 670 is a 2 piece affair IIRC. Cant recall what the magazine box is like. Not saying one is better than the other though I do have my preferences.