|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 12, 2013, 09:13 AM | #1 |
Senior Member
Join Date: December 29, 2010
Location: Gwinnett County Georgia
Posts: 1,136
|
Recipe needed 4 125gr 9mm lead with Bullseye
I have been using AA#5 for my 9mm loads using 125gr lead CN and Bullseye for my 45acp loads. I like Bullseye really well for my 45 loads and want to try it with my 9mm loads.
Lymans 49 does not have an entry for 125 or 124, only 120gr and Alliants website shows load data for Bullseye but for jacketed data, no entry for lead. Can someone suggest a load for 9mm 125gr lead CN using Bullseye
__________________
Do not follow where the path may lead, go, instead where there is no path and leave a trail - Ralph Waldo Emerson Last edited by Roland Thunder; March 12, 2013 at 02:25 PM. |
March 12, 2013, 10:02 AM | #2 |
Senior Member
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
|
Lyman Pistol and Revolver has 125 grain lead, their bullet number 358093, 1.115 COAL, Bullseye powder Start at 3.3 with Maximum of 3.9. Federal case, CCI 500 primer.
Note this particular bullet has a gas check! Both Lee and Speer show higher charge amounts for a 125 grain bullet. Looks like it may be time for you to buy another reloading manual to add to your library.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part. |
March 13, 2013, 12:58 AM | #3 |
Senior Member
Join Date: December 26, 2004
Location: Louisville KY
Posts: 13,805
|
Well, take the 120 data and back off the powder charge a hair.
|
Thread Tools | Search this Thread |
|
|